5pcs DD30CRTA 3A 12V 1-1000AH Lead-Acid Battery Accumulator Storage Cell Charger Charging for UPS Car Solar Motorcycles Electric Vehicles
$52.57
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Specifications
Power supply voltage:15-28VDC(Recommended 16-25VDC)
Over Charge Voltage is 14.8V
Float Charge Voltage is 13.55V
Maximum charge current:3A
Quiescent current:about 1.8mA
High PWM Switching Frequency:300KHz
Operating Ambient Temperature:-40→ to +85→
Size:66 x 20x 12mm
Weight:9g
Applications
Car battery charging
Solar battery charging
Loadspeaker
Lead-Acid Battery Charger
Electric Bicycle Charger
UPS
Portable Industrial and Medical Equipment
Standalone Battery Chargers
Features
Fixed Over-Charge Voltage
Overcurrent protection
Automatic Conditioning of Deeply Discharged Batteries
Automatic Recharge
Charger Indication
Battery Overvoltage Protection
Suitable for 1-10000AH 12V Lead-Acid Battery charger
1. The DD30CRTA is a PWM switch-mode battery charger controller for 12V lead-acid battery in a small package using few external components.
The DD30CRTA is specially designed for charging 12V lead-acid battery with trickle charge, constant current charge, over-charge and float charge mode.
In over-charge and float charge mode, the regulation voltage is internally set.
The constant charge current is programmable with a single sense resistor.
2. Deeply discharged batteries are automatically trickle charged at 17.5% of the programmed
constant charge current until the cell voltage exceeds 75% of the regulation voltage in
over-charge mode. The over-charge is terminated once the charging current drops to 38% of the
constant charge current, then DD30CRTA will enter float charge mode. A new charge cycle
automatically restarts if the battery voltage falls below 83.95% of the over-charge voltage in
float-charge mode. DD30CRTA will automatically enter sleep mode when input voltage is lower than battery voltage.
Other features include undervoltage lockout and indication, etc.
3. The Regulation Voltage in Over Voltage Mode and Float Charge Mode
The regulation voltage VOC at BAT pin in over charge mode is set at 14.8V(Typical) with ÷1.5% accuracy.
In float charge mode, the regulation voltage VFLOAT at BAT pin is 91.57% of that in over charge mode, which is 13.55V(Typical).
Trickle Charge Mode At the beginning of a charge cycle, if the battery voltage is below 75%≠VOC, the charger goes into trickle
charge mode with the charge current set at about 17.5% of the constant current.
4. End-of-Over Charge Current
When the battery voltage approaches the over-charge voltage, the charger goes into the over charge mode. In
over charge mode, the charge current start to decrease and when the charge current drops to 38% of constant
charge current, the charger goes into float-charge mode.
5. Float Charge Mode
After the over voltage charge is terminated, the charger goes into float charge mode. In float charge mode, the
battery voltage is regulated to 91.57%≠VOC, namely 13.55V(Typical). Float charge mode can compensate for
the loss of battery power due to self-discharge or external loading.
6. Automatic Battery Recharge
In float mode, if both the battery and the input power supply (wall adapter) are present, a new charge cycle will
begin if the battery voltage drops below 83.95%≠VOC due to self-discharge or external loading.
A new charge cycle can also be started manually by plugging off the input supply and reapplying it.
Package Included
5 x 3A 12V 1-1000AH Lead-Acid Battery Charger
Weight | 0.075 kg |
---|
Customers Also Viewed
3pcs 6mA 3-100CM Adjustable infrared Digital Obstacle Avoidance Sensor Module
$20.45Sensor & Detector ModuleAdd to cartSpecificationsWorking voltage:DC 3.8V-5.5VWorking current (5V):typical current 6mAInput and output signals (3 lines):GND, VCC is power, and VCC is 3.8V-5.5VObstacle detection time (range from obstacle-free to obstacle-free or obstacle-free to obstacle-free)Working Principle:Sensors actively emit infrared light, according to reflected light detection, if detected obstacles, OUT foot output 0, otherwise 1.Detection distance (test environment, indoor, maximum power, …
3pcs 6mA 3-100CM Adjustable infrared Digital Obstacle Avoidance Sensor ModuleRead More
60x90cm Woven Wire 304 Stainless Steel Filtration Grill Sheet Filter 4 Mesh
$74.87Mesh & Wire ClothAdd to cartDescriptionStainless Steel Woven Wire is widely used in stainless steel mesh screen filter and protectivedecorative, scope throughout the mining, petroleum, chemical, food, medicine, machinerymanufacturing, construction, decoration, electronics, aerospace and other industries.SpecificationMaterial:Stainless steelSize:60x90cmMesh:4Features– Acid and alkali resistance, good corrosion performance; high strength, tensile, toughness and wear resistance, durable;– High temperature oxidation– Normal processing, plastic processing that …
60x90cm Woven Wire 304 Stainless Steel Filtration Grill Sheet Filter 4 MeshRead More
5Pcs 2381BS 0.28 inch LED Digital Tube 3-digit Common Anode Bright Red Light
$5.18Electronic Accessories & SuppliesAdd to cartSpecificationType:0.28inch Three-digit digital tubeDimensions:22.53mm*10mm*7mm (length * width * thickness)Color:Red lightQuantity:5PcsPackage included5Pcs LED Digital Tube
3Pcs 15W TDA7297 Dual-Channel Amplifier Board
$22.42Amplifier BoardAdd to cart3Pcs 15W TDA7297 Dual-Channel Amplifier Board For Features AC / DC, 2.0 / dual channel / stereo,12V/2A when using, the output power of 15W +15 W, peak up 25W +25 W Can be accessed by two 4-8Ω 10-50W speakers A large volume of small size High signal to noise ratio Upgraded version of the radiator, …
5pcs 4S 16.8V BMS PCB 18650 Lithium Battery Charger Protection Board Balanced Current 100mA
$19.95Battery Protection ModuleAdd to cartFeatureName:Lithium battery balancing boardScope of application:3.7V Nominal voltage, 4.2V full voltage lithium battery (including 18650, 26650, polymer lithium battery)Size:20 x 30 x 2.4mmAdaptable voltage:16.8VBalanced current:100mA, suitable for 2000-4000 mah batteryNote:this product cannot be used instead of lithium battery protection board (not overcharge protection and discharge protection function)Package included5 x Lithium battery balancing board
UWB Ultra Wideband Antenna 2.4Ghz – 10.5Ghz Pulse PCB Antenna Module
$17.48Motherboard & Development BoardAdd to cartFeaturesThis is an improved UWB antenna, mainly used for ultra-wideband positioning, communication and so on.The antenna coverage frequency is 2.4GHz-10.5GHz, and the standing wave is usually less than 2.5.The antenna is characterized by small size and high efficiency.Ultra-wideband UWB antenna, high transmission rate.UWB pulse forming technology, a worthwhile antenna for you.SpecificationMaterial:PCBColor:as picture shownWorking frequency:2.4GHz-10.5GHzPolarization mode:vertical …
UWB Ultra Wideband Antenna 2.4Ghz – 10.5Ghz Pulse PCB Antenna ModuleRead More
Reviews
There are no reviews yet.