WITRN 200W 4 Ports / 400W 8 Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 with Cable for Huawei Apple
$51.38
Model 4 / Model 8 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Specification
– Power:200W 4 ports/ 400W 8 ports
– the main chip adopts 3518S
– Usb-c port:support PPS PD qc4 + qc2.0 qc3.0 FCP SCP MTK and conventional 5V DCP aple2.4a
– E-marker wire is required for 100W 20V 5A output of Type-C port, otherwise only 20v 3a output capacity is available
– Usb-a port:no PD PPS qc4 +, other protocols are the same as port C, with more vooc output (original cable is required)
Note
1. The input voltage of all modules is DC12V ~ 28V, which will be damaged immediately if exceeded!
2. Xt30 X60 DC port is only used for small power test. It is recommended that the input power of DC port should not exceed 300W, otherwise the DC port will be damaged. Please use XT port for high power input
3. Connectors for these modules do not sell separately.
Do not connect the positive and negative poles reversely when you DIY the module ,otherwise the module will be damaged.
4. Before the module is powered on, please check the positive and negative poles. With a multimeter, you can check whether the positive and negative DC ports are reversed (internal positive and external negative). you can check whether the LED is on or not by xt30 and XT60 power station. If it is not, it is reversed.
5. We recommend measured with a multimeter after xt30 and XT60 are connected with DC Cables
Package Included
1 x WITRN 200W 4 Ports / 400W 8 Ports Power Charger with Cable
Weight | 0.1 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.