Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game Toys
$16.19MathematicsAdd to cartSpecificationMaterial:PlasticColor:Random ColorWeight:90gCube:(L*W*H) approx 4*4*4cm/ 1.57*1.57*1.57 inchCylinder A:(Dia*H) approx 3*3*6cm/ 1.18*1.18*2.36 inchCone:(Dia*H) approx 3*3*5cm/ 1.18*1.18*1.96 inchSphere:(Dia) approx 3cm/ 1.18 inchFeatures1.Shapes including cubes, cylinders, pyramid, sphere, cone, and various Cross-sections model.2.Cross-section of Geometric Solids Experiment set, kids math geometry manipulatives.3.Explore shape, size, pattern, volume and measurement with these invaluable hands-on tools.4.Opened and clear plastic geometric solids, easily …
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game ToysRead More
2Pcs 20W 16V 1.25A Monocrystalline Silicon Rear Junction Box Solar Panel + 4 x Spring + Cables
$107.51Smart Robot & Solar PanelAdd to cartFeatures– The two pieces of the product are connected in parallel. Spring connection, support multiple pieces of DIY parallel connection. Mounting holes are provided on each solar panel.– Suitable for 12V batteries. Support 12V output, suitable for 12V battery charging.– High efficiency, conversion rate of 19-20%– Flexible, suitable for surface mountingSpecificationsType:Flexible solar panelMaterial:Monocrystalline siliconExpand:420*385*2.5mmFolding:420x190x2.5mmWorking temperature:-40° …
3pcs D1 Mini Lite V1.0.0 WIFI internet of Things Development Board Based ESP8285 1MB FLASH
$23.13Smart ModuleAdd to cartFeatures11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)1 analog input(3.2V max input)a Micro USB connectionCompatible with 1MB Flash500mA resettable fusePackage included3 x WEMOS D1 mini Lite3 x 2pcs Normal pin
3pcs 315MHZ Wireless Transmitter Receiving Module ASK DC 9V-12V EV1527 Remote Control Switch Board
$11.69Smart ModuleAdd to cartTechnical requestProduct model:ZF-2 (with code)Transmission frequency:315MHZWorking voltage:DC 9V ~12VModulation method:ASKQuiescent current:0uAWorking current:8~10mACoding type:learning code (EV1527)Radiated power:10~15mWShooting distance:100-200 meters (receiver sensitivity -108dBm)Volume:26.3mm*23.3mm*9mmPIN:NAME:Function1:ANT:RF signal input pin, this pin needs to be connected to the antenna2:12V-:DC power supply negative input pin3:12V+:DC power supply positive input pinRated parameter:Symbol:ValueDC power supply:VDD-VSS:9V-12VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°CPackage includes3 x Receiving …
5Pcs Geekcreit ESP8266 ESP-01 ESP-01S WS2812 RGB LED Lamp Module Support for IDE Programming
$11.37Expansion Board & ShieldAdd to cartFeatureThis is a WS2812 RGB LED control module based on ESP-01 / 01S. With it, you can easily control the WS2812 light bar / light ring. DIY own lighting control system. Support for Ard uino IDE programming.Characteristic* Master:ESP-01 / ESP-01S (This module does not include ESP-01 / ESP-01S)* Control Pin:GPIO2* Interface:3Pin PH2.0 connector* Operating Voltage:DC …
DD30CRTA 3A 12V 1-1000AH Lead-Acid Battery Accumulator Storage Cell Charger Charging for UPS Car Solar Motorcycles Electric Vehicles
$15.30Power Supply ModuleAdd to cartSpecificationsPower supply voltage:15-28VDC(Recommended 16-25VDC)Over Charge Voltage is 14.8VFloat Charge Voltage is 13.55VMaximum charge current:3AQuiescent current:about 1.8mAHigh PWM Switching Frequency:300KHzOperating Ambient Temperature:-40→ to +85→Size:66 x 20x 12mmWeight:9gApplicationsCar battery chargingSolar battery chargingMobile LoadspeakerLead-Acid Battery ChargerElectric Bicycle ChargerUPS Portable Industrial and Medical EquipmentStandalone Battery ChargersFeaturesFixed Over-Charge VoltageOvercurrent protectionAutomatic Conditioning of Deeply Discharged BatteriesAutomatic RechargeCharger Status IndicationBattery Overvoltage ProtectionSuitable …
Reviews
There are no reviews yet.