Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
20pcs Sound Module for Electronic Toy IC Chip Voice Recorder 120s 120secs Recording Playback Talking Music Audio Recordable Board Gift
$85.21Other Module BoardAdd to cartSpecificationsOperating Voltage:3-5VStandby CurrentRecording Time:120sRecording Input:adopt ADC 14 Bit,Audio Out DAC 14 BitRecording Voice Format:ADPCMRecording Distance:3-5mRecording/Voice Play Mode:independently play a piece of sound recording or play a piece of prerecordig voiceCycle Mode Play:can set cycle play times or constant cycle playPrerecording voice is burnt from external to SPI Flash,can prerecord chord music or voiceAdaptive Loudspeaker:8-32 ohm …
10pcs 130 Small Motor DIY Homemade Fan Toy Accessories
$10.33Module ComponentsAdd to cartFeatureThree-leaf soft paddle, the central ring yellow cap is ABS green plastic, the surrounding fan blade is super soft silicone material, even if it is touched by hand when transporting, it will not be injured, it is very suitable for young makers DIY use; Used with the motor will make your DIY work more convenient.MotorSize:25*20*15mm3-6V …
10pcs 130 Small Motor DIY Homemade Fan Toy AccessoriesRead More
10pcs CJMCU-9930 APDS-9930 Proximity and Non Contact Gesture Recognition Detection Attitude Sensor
$33.33Sensor & Detector ModuleAdd to cartFeatures• Optical modules integrated with ALS, infrared LEDs and proximity detectors• Ambient Light Sensing (ALS) – Approximate human visual response – Programmable interrupt capability with upper and lower thresholds – Up to 16-bit resolution – High sensitivity operation behind dark glass – 0.01lux low lumen performance• Proximity detection – Fully calibrated to 100 mm detection …
150pcs LED RGB Common Cathode 4-Pin F5 5MM Diode
$19.32Electronic Accessories & SuppliesAdd to cartFeaturesConvenient for DIY and repair equipment and electrical appliancesPerfect use for home, office and industry electrical equipment and electrical appliancesCurrent:20mAVoltage:3VSize:5mm Light Color:RED, BLUE, GREENPackage included150 x Cathode 4-PINS F5 5mm LED Light
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish Tank
$32.87Electronic Accessories & SuppliesAdd to cartSpecifications1. Volt:220v2. Power:100w3. Microcomputer control,Power off memory function4. Made of high-intensity anti-explosion and corrosion protection material5. Ideal for use in either saltwater or freshwater aquariums6. Electronic temperature control, high accuracy:±1→7. Easy to read and adjust the temperature8. Fixed to the glass by suction9. Adjustable temperature is 16-36 degreePackage included1 x Fish tank heater1 x English …
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish TankRead More
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator Module
$10.84Boost & Buck ModuleAdd to cartDescription– DC DC Boost Converter Module working frequency 1MHZ. – Up to 93% Efficiency (usually is 84%-91%) – Quiescent current:190uA.– Current Limit Program(0.5-2.5A,Default 1.8A) – Size:21 x 11 x 4mm– Weight:1.5g– ProtectionOver current protection(OCP)Over voltage protection(OVP)Short circuit protection(SCP)Over temperature protection(OTP) Output 5VInput voltage DC 2.6 ~ 4.5V,output DC 5V±3%Maximum output:5V/1300MA(See the table below for details) …
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator ModuleRead More
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling Heatsink
$15.34Electronic Accessories & SuppliesAdd to cartFeatures3pin ultra silent LED case fan.Each fan is With 15 LED lights.Connect to power supply or motherboard.Anti-vibration rubber pads on all four corners keep the fan super silent.It offers incredible cooling to increase the longevity and stability of the system and components.Cooling fan for desktop computer case and CPU cooler.SpecificationLED Light Color:Colorful MarqueeCompatible CPU:Computer Case …
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling HeatsinkRead More
Reviews
There are no reviews yet.