Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
40x20x20cm Acrylic Display Box Clear Perspex Plastic Dustproof Base Transparent Case
$69.97DIY Electronic KitsAdd to cartFeatures– Made of acrylic material, clear and lightweight.– Simply design, very easy to install.– It is an wonderful display case, keep your collection figures tidy and clean.SpecificationsMaterial:AcrylicColor:TransparentSize:(L x W x H )21cm x 21cm x 41cm (8.3’x8.3’x16.1′)NOTEYou need to assemble the sheet into a box.Notice1. Please allow 1-3cm error due to manual measurement. Please make …
40x20x20cm Acrylic Display Box Clear Perspex Plastic Dustproof Base Transparent CaseRead More
3Pcs 1*40P Curved Needle Tin Plated Single Curved Needle 2.54MM Pin Connector
$2.15Module ComponentsAdd to cartSpecificationRoted Current:3.0AMPContocl Resistonce:20m┯ MaxWithstand Voltage:1000V AC/DCInsulation Resistance1000m┯ MinOperation Temperature:-40→ ~+105→Contact Material:BrassContact Plating:Tin over NiInsulator Material:Polyester(UL94V-0)Standard:PA6TMax.Processing Temp:230→ for 30-60 seconds(260→ for 10 seconds)Package included3 x 1*40P Single Curved Needle
3Pcs 315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module Board Not Super-heterodyne
$6.80Smart ModuleAdd to cartTransmitter ModuleSpecificationWorking voltage:3V ~ 12VWorking current:20mA ~ 28mAStandby current:0mAWorking frequency:315MHzTransmitter distance:>500m (sensitivity can be above -103dBm if in wide field)Output power:16dBm (40mW)Transmitter rateModulation mode:OOK (AM)Working temperature:-10°C ~ +70°CSize:19 x 19 x 8mmFeatureStable performanceWider range of working voltagePinsPIN1 ATAD:data inputPIN2 VCC:power +PIN3 GND:power –ApplicationWireless calling system, burglar alarm, wireless data transmission, automated data acquisition systemReceiver Module …
3Pcs 315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module Board Not Super-heterodyneRead More
6-30V 1 Channel Relay Module Switch Trigger Time Delay Circuit Timer Cycle Adjustable
$13.11Relay ModuleAdd to cartFeatures1. Trigger Signal Source:High Level Trigger (3.0 V-24 V), signal ground and system ground are not common, which can increase anti-interference abilitsystem (short circuit can also connect with a ground common)2. Output Capacity:can control no more than DC 30V 5A AC or 220 V devices 5A3. Optocoupler Isolation:improve the anti-interference ability, after the parameter setting, …
6-30V 1 Channel Relay Module Switch Trigger Time Delay Circuit Timer Cycle AdjustableRead More
3Pcs Wemos Motor Shield for WeMos D1 Mini I2C Dual Motor Driver TB6612FNGV1.0.0
$21.01Driver ModuleAdd to cartFeaturesI2C interfacePower supply voltage:VM=15V maxOutput current:Iout=1.2A(average) / 3.2A (peak)Standby control to save powerCW/CCW/short brake/stop motor control modesPins DescriptionVM:Motor power supply + (Max 15Vdc)GND:Motor power supply –A1 A2:Motor AB1 B2:Motor BS:Standby control port (in IO mode)More detail:Click Here!Package included3 x Motor Shield For WeMos D1 Mini
10Pcs TCRT5000 E2A3 1-Channel Smart Car infrared Tracking Sensor Detection PIR Sensor Module
$12.31Sensor & Detector ModuleAdd to cartProduct Usage1, the meter pulse data sampling2, fax machine shredder paper detection3, obstacle detection4, black and white line detectionProduct parametersInfrared reflection sensor:TCRT5000Detection reflection distance:1mm~25mmWorking voltage:5VOutput form:digital signal (0 and 1)Installation:with fixing bolt holesSmall board PCB size:3.5cm x 1cmSingle weight:4.5gFeaturesThe infrared emitting diode of the TCRT5000 sensor continuously emits infrared rays. When the emitted infrared rays …
5pcs DIY Technology invention Single-wing Wind Car Assembly Model DIY Car Kit
$28.96DIY Electronic KitsAdd to cartSpecificationsMaterial:WoodSize:approx. 12*7.6*12cmMulti-function:NoPower supply:2x AA Battery(not included)Foreign trade:YesDIY:Do it yourself according finished product painting in the package.ApplicationsInterest-building, parent-child communication, emotion, sensory,intellectual development, hands-on brain, hearing, interactive toys, grasping,hand-eye coordination, other abilitiesNote1.Please allow 1-3cm errors due to manual measurement.2.Due to the difference between different monitors, the pictures may not reflect the actual color of the item.Package Included5 …
5pcs DIY Technology invention Single-wing Wind Car Assembly Model DIY Car KitRead More
Reviews
There are no reviews yet.