Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
10Pcs RobotDyn Thyristor AC Switch Relay Module 3.3V/5V Logic AC 220V/5A Peak 10A
$54.90Relay ModuleAdd to cartFeatureIf you need to control the AC power (lights, home equipment’s), a thyristor is what you need. This is a very common thyristor module with very low on-resistance and a control voltage, that is compatible with any 3.3V or 5V micro-controller or mechanical switch. This allows you to control high-power devices with very low-power control …
10Pcs RobotDyn Thyristor AC Switch Relay Module 3.3V/5V Logic AC 220V/5A Peak 10ARead More
Glass Transparent Cell Spreader Bacteria Wide Spreading Bar Polished Ends Biological Experiment
$15.30Laboratory BottleAdd to cartDescriptionGlass Transparent Wide Cell Spreading Bar Used for Biological ExperimentSpecificationMaterial:GlassColor:ClearFeatures1.Suitable for us to swirl the spreader around the dish to evenly distribute the cells or bacteria with applying much pressure.2.Smooth shape end makes spreading easy.3.Eco-friendly Material and good design. 4.Easy sterilization.NoticeThe spreader should be back in alcohol or ethanol to keep it clean and prevent …
3pcs 78M05 Mini Voltage Regulator Module with Pin High Accuracy Low Power Consumption LO7805MA 5V
$6.93Boost & Buck ModuleAdd to cartFeatures1. Used in small power motors, cameras, electric toys, LED lighting, etc.2. The product has high accuracy whose range is ±2%3. With thermal overload protection, short circuit protection and output switching SOA protection4. The product has ±2% output voltage toleranceSpecificationsHigh Accuracy:±2%Quiescent Current:6mAWorking Temperature:-40→ ~ + 125→Size:18 x 10.5 x 5mm5VInput Voltage:DC 7-25V, Output Voltage:DC 5VOutput …
234Pcs Upgraded Outdoor Emergency Survival Kit Gear SOS First Aid for Home office Boat Camping Hiking
$64.79Lab Clamp & StandAdd to cartSpecificationBag Color:RedSize:260*80*180mm(L*W*H)Quantity:234 PCSFeatures– Small size and easy to carry.– First aid dedicated, fully equipped.– A good choice for emergency situation.– Essential items for going out or at home.– Multifunctional, practical and convenient.– With quality hardware zipper, easy to open and close.– Made of high quality material, waterproof, high wear resistance.– Can be used for outdoor …
5Pcs 3S 12.6V 6A BMS Li-ion Lithium Battery Protection Board 18650 Power Bank Balance Battery Board
$24.04Battery Protection ModuleAdd to cartFeatureSize:about 56×33.5x12mmUpper operating current:8AUpper transient current:40A÷5AOvercharge range:4.25÷0.05VOver disvoltage range:2.5÷0.05VCharging voltage:12.6-13VFunction:over charge/ over discharge/short circuit/ over current protectionPackgae includes5 x Battery Protection Board
3Pcs Double End Cleaning Brush Set Brass Steel Nylon Wire Brush Kit
$10.11Laser SightAdd to cartSpecificationMaterial:Brass, Steel, NylonLength:17.2cm / 6.8inchLarge End Brush Size (L*W*H):37x7x12mmSmall End Brush Size (L*W*H):22x2x8mmFeatures– Includes 3 brushes, 3 types of double-ended brushes:Brass, Steel, Nylon.– Versatile cleaning capabilities with both a large and small end, 7 inch total length for cleaning all sorts of hard-to-reach spaces.– The steel and brass brush help to clean stubborn areas on …
3Pcs Double End Cleaning Brush Set Brass Steel Nylon Wire Brush KitRead More
100-240V Power Adapter Power Supply Adaptor Plugs AU Standard
$16.19AC/DC AdaptersAdd to cartPower Supply Adaptor for Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105SpecificationsInput:AC 100-240V, 50/60HzOutput:DC 12V 1AColor:BlackSize(Approximately):7.8*4.9*3.2cm(approx.)Wire length(Approximately):93cmPlug type:AU PlugFeatures-Voltage Protection-Short Circuit Protection-Current Protection-Sealed for protection against moisture and humidityApplicationFor Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105Package included1 x Adaptor
Reviews
There are no reviews yet.