Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module for
$18.58Sensor & Detector ModuleAdd to cartFeatureAdxl345 digital three-axis acceleration of gravity tilt module Ar code iic / spiName:three-axis acceleration of gravity moduleChip:the adxl345Power supply:3-5VCommunication:the IIC / SPI communication protocolMeasuring range:± 2g ± 16gSchematics, manuals and reference documentation of relevant data51, the avr, the Ar microcontroller test code3-axis, ± 2g / ± 4g / ± 8g / ± 16gPackage includes5 x …
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module forRead More
10pcs DC-DC 5-32V to 0.8-30V Power Supply Step Down Module Adjustable Buck Regulator 5A Constant LED Driver Battery Charging Voltage Board
$47.05Power Supply ModuleAdd to cartOverviewThe module uses high-quality chips, high efficiency (up to 95%), low heat generation, maximum 5A current, and TI’s op-amp control output current, making the overall output very stable.This module uses a low-ESR filter capacitor to reduce ripple voltage to 50mV!FeaturesModule nature:non-isolated buck moduleRectification mode:asynchronous rectificationWiring port:Input mode:IN+ input positive, IN- input negativeOutput mode:OUT+ output positive, …
5pcs 2 in 1 8W 3-24V to 24V Boost-Buck Dual Voltage Power Supply Module for ADC DAC LCD OP-AMP Speaker
$43.70Power Supply ModuleAdd to cartDescriptionInput voltage:3~24V, output:±24VMaximum output power:1-8W (For details, please see the description at the bottom or ask us for information.)Conversion efficiency:70-90%Quiescent current:3-4mAAccuracy:Positive voltage ±3%, Negative voltage ±5%8W DC-DC Boost-Buck Converter working frequency:400KHZ. Operating ambient temperature:-40~+85 Degrees CelsiusSize:42 x 24 x 15mmWeight:10gFeatureHigh efficiency up to 90%Built-in Frequency CompensationBuilt-in Soft-Start FunctionBuilt-in Thermal Shutdown FunctionBuilt-in Current Limit FunctionNote1. In …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-Higrow
$9.06Sensor & Detector ModuleAdd to cartGithub Link:Click here to openProducts that can be used withT-WATCH SeriesT-Watch Upgraded Version Black Product ID 1551855 T-Watch Upgraded Version White Product ID 1551854 T-Watch Basic Version Product ID 1501125 T-Watch Basic Version with Silicone Shell Product ID 1722494 TTV:Product ID 1777327 T-Higrow:Product ID IntroductionThe LILYGO T-FH interface sensor is the abbreviation of female header. …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-HigrowRead More
10pairs MC4 Connector+1pair Spanner Male Female 30A Cable Plug MC4 Connector Solar Panel Branch Series Connect Solar System
$28.42Electronic Accessories & SuppliesAdd to cartDescriptionItem no:MC4Rated voltage:1000 VRated impulse voltage:1000 VRated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉Test voltage:6 kV (50 Hz)Protection grade:IP67Insulation material:PC/PAContact material:Copper, silver-platedOperating temperature:-40°C ~ +90°CSafety class:IIFlame class:UL94-V0Contact resistance:≤5mΩInsertion / Withdrawal force:≤50N / ≥50NSuitable for cables:10, 12, 14 AWG (2.5mm2/4mm2/6mm2😉Locking system:Snap-inPackage included10pairs x MC4 Connectors1pair x MC4 Spanner
10Pcs 1 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$12.56Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:23*20mmPackage Included10 x 1 Key Press Film Switch
Reviews
There are no reviews yet.