Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
5Pcs T2310 DC24V Programmable Digital Time Delay Switch Relay T2310 Normally Open Timer Control Module 0-999S/Min/Hour
$43.73Test & Measuring ModuleAdd to cartFeatureIndependent crystal oscillator, more accurate timing1. Convenient direct output wiring2. Add buzzer and audible alarm3. Add pause button to stop urgently5. Start and stop setting mode, provincial conversion, which is more convenient6. Automatically save when power off, run automatically when power on7. Timing units can be set separately, with 36 working combinations8. Timing range:0-999 seconds, …
3pcs 12V Normally Closed Vibration Sensor Module Plus Relay Module 2-in-1 Module Alarm Triggered Vibration Module
$25.34Sensor & Detector ModuleAdd to cartApplicationsThe vibration trigger alarm can be directly used in various high current and high voltage applications.Features1. With SW-420 sensitive and normally closed vibration sensor;2. The shock sensor can be externally connected to the detection position, and the line length has no effect on the sensitivity within 10 meters;3. Directly bring relays to drive high current …
5pcs DC-DC 3V-15V to 5V Fixed Output Automatic Buck Boost Step Up Step Down Power Supply Module
$12.23Power Supply ModuleAdd to cartFeatureThe DC-DC power module is automatically buck-boost to support the shutdown function.The maximum input voltage is 15VDC, the quiescent current is less than 200uA, the fixed output is 5V and the maximum output current is 600mA.Design work frequency of up to 1.2MHz, high stability, cost-effective, all industrial-grade components, long working voltage drift-free, suitable for demanding …
16 Keys TTP229 Capacitive Touch Module I2C Bus
$10.92Relay ModuleAdd to cartFeatureTP229 Capacitive Touch Module have 16 capacitive inputs.The module has two working modes. Module use only 16 key mode.For connection to microcontrollers (, Raspberry, STM) use the I2C interface.To capacitive inputs can connect special capacitive KeyPad, any metal objects, prints of electronic ink or pens, fruits.In our catalog have 16 key touch KeyPad or disk …
2 Wheels Ultrasonic Smart Robot Car Chassis Tracking Car Kit for
$59.76Smart Robot & Solar PanelAdd to cartFeatures1. Mechanical structure is simple and very easy to install.2. Car comes with 20 wire tachometer yards. You can speed, distance, composed of closed-loop systems.3. Car with four on the 5th battery compartment, convenient to the entire system power supply. At the same time equipped with a switch, easy start-stop system. Without additional very convenient, …
2 Wheels Ultrasonic Smart Robot Car Chassis Tracking Car Kit forRead More
5V Ultrasonic Microporous Atomizer Drive Board Humidifier Control Board PCBA Drive Circuit Board
$12.66Driver ModuleAdd to cartBasic product parametersSize:↓18*0.75MMFrequency:113KHZCapacitance:3200PFDrive voltage:3~12VMicropore diameter:8umNumber of micro holes:585 holesAtomization amount:50ML/HProduct advantages1. Low impedance2. Stable waveform3. High electromechanical conversion efficiency4. Low dielectric loss5. Low heat6. Large amount of atomization7. Life is greater than 1000 hours8. Strong acid and alkali corrosion resistancePackage includes1 x Driver Board
3Pcs W3231 AC110V~220V LED Digital thermostat Temperature Controller Regulator Heating Cooling Control Switch
$29.02Test & Measuring ModuleAdd to cartSpecificationDual Display Temperature Controller Temperature control range:-55C~120C/-67F~ 248FTemperature control accuracy:0.1 C / 0.1 FDisplay color:red + blueWorking power supply:AC110V~220VSensor:NTC 10K 1 Meter (with probe)Product Size:79.2mm≠41.9mm≠26.3mm Hole Size:72.1mm≠39.2mmOperation and display panelIndicator lightOperation guide1. Short press “SET” small digital tube to flash, press “” or “” to set the target temperature, press “Standby” button or no operation …
10pcs RX24 25W 6R 6RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$20.97Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
Reviews
There are no reviews yet.