Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
30pcs EQKIT Electronic Funny Kits Voice Control LED Melody Light DIY Kits Production Suite Small Electronic Learning Electronic Kits
$56.32DIY Electronic KitsAdd to cartDescriptionVoltage:3-4 .5 VPCB material:FR-4 fiberglass boardDimensions:34 * 34MMPackage included30 x Voice Control LED Melody Light DIY Kits
10pcs Transparent Protective ABS Case Support Cooling Fan for Raspberry Pi 4 Model B
$58.27Raspberry Pi & Orange PiAdd to cartOverviewThis is a new design ABS case to protect your Raspberry Pi 4 Model B computer, and it is only comepatible with your Raspberry Pi 4 Model B, not support other versions. Also support install a dc 5v cooling fan. The GPIO pin interface is available to us if you do not install the cooling …
10pcs Transparent Protective ABS Case Support Cooling Fan for Raspberry Pi 4 Model BRead More
10pcs Roller Lever Arm Micro Switch AC 250V HV-156-1C25
$13.11Electronic Accessories & SuppliesAdd to cart10pcs Roller Lever Arm Micro Switch AC 250V HV-156-1C25DescriptionSize:27.8 x 10.3 x 15.9mmRoller Diameter:4.75mmLever Length:28mmRating:15A AC250VWithstand Voltage:AC1, 0000V 1 MinuteInsulation Resistance:100mΩ DC500VContact ResistanceSoldering Temperature:250°C Max 3 sec.Ambient Temperature used:-25°C to +80°CAmbient Humidity UsedOperating Force:160Part number is HV-156-1C25Package included10 x Micro Switch
Solar TPMS LED Wireless Tire Pressure Monitoring System with 4 internal Sensor
$168.06SwitchesAdd to cartFeatures-This wireless tire pressure monitoring system comes with four built-in sensors and a digital monitor to monitor the tire pressure/temperature-By employing the advanced wireless sensors which highly integrated pressure and temperature sensor, we provide the amazing and reliable TPMS for you-Oil will be decreased when tires work under lower pressure, this item can reduce fuel …
Solar TPMS LED Wireless Tire Pressure Monitoring System with 4 internal SensorRead More
Deek-Robot W-1213 intelligent Digital Display Fish Tank Climbing Pet Greenhouse Planting Hatching and Breeding Temperature Controller
$26.23Test & Measuring ModuleAdd to cartProduct parameterProduct name:Intelligent temperature controllerProduct model:W-1213Power supply voltage:AC110-220VWorking frequency:50HZTemperature range:-40C~+120CTemperature measurement accuracy:÷0.5CSensor cable length:100CMSize:79.5*43*35mmShell material:surface shell ABS, bottom shell flame retardant ABSBattery:CR1220 3V button battery(not included)Display panel descriptionHeat (corresponding icon display):heating mode, in heating mode, heating the relay works.Cool (corresponding icon display):Cooling mode, in cooling mode, cooling the relay works.Timer:Timer switch, in timer mode, the …
Waveshare IMX219-160 Camera 160 Degree Field of View 8 Million Pixels for Jetson Nano
$54.66Smart ModuleAdd to cartFeaturesSupports NVIDIA Jetson Nano Developer Kit, Compute Module 3/3+8 MegapixelsSensor:IMX219Resolution:3280 ≠ 2464Lens specificationsCMOS size:1/4inchAperture (F):2.35Focal Length:3.15mmAngle of View (diagonal):160 degreeDistortion4 screw holesUsed for attachmentProvides 3.3V power outputDimension:25mm ≠ 24mmApplicationsCombined with the Jetson Nano AI computer, this camera suits for AI projects such asFace recognitionRoad mark detectionLicense plate recognitionPackage includes:(the Jetson Nano does not includes)1 x …
Waveshare IMX219-160 Camera 160 Degree Field of View 8 Million Pixels for Jetson NanoRead More
10Pairs MC4 Connector Male And Female MC4 Solar Panel Connector 30A 1000V for PV Cable 2.5/4/6mm Solar Panel Connect
$26.23Electronic Accessories & SuppliesAdd to cartSpecificationArticle number:MC4Rated voltage 1000 VRated impulse voltage:1000 VTest voltage:6 kV (50Hz)Suitable for cables:10, 12, 14 AWG (2.5mm2 / 4mm2 / 6mm 2;)Rated current:24 A-14 AWG (2.5mm 2;), 30A-12 and 10 AWG (4mm 2; and 6mm 2;)Protection class:IP67Contact material:copper, silver platedInsulation material:PC / PAOperating temperature:-40 ° C + 90 ° CThe security class:IIFlame Class:UL94-V0Contact resistance:≤5mΩInsertion / …
Reviews
There are no reviews yet.