10pcs XH-M609 DC12-36V Voltage Protection Module Lithium Battery Undervoltage Low Power Disconnect Output Board
$81.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Parameter
Product name:Battery over-discharge protection module
Product model:HCW-M635
Power supply voltage:DC12-36V
Output voltage:equal to the supply voltage
Control accuracy:0.1V
Power consumption
Use:various storage batteries / lithium batteries
Net weight:28g
Product size:57 x 42 x 19mm
Set to stop below 12.5V and start above 14V
Set the protection value:press ‘+ 寧 once to display the protection value, double-click’ + 〃 ‘, the decimal point flashes, and then press’ +,-‘to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.
Set the hysteresis value:press ‘-〃 once to display the hysteresis value, double-click’ -〃, the decimal point will flash, and press ‘+,-‘ to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.
Set to stop below 10V and start above 15.5V
Set the protection value:press ‘+ 寧 once to display the protection value, double-click’ + 〃 ‘, the decimal point flashes, and then press’ +,-‘to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.
Set the hysteresis value:press ‘-〃 once to display the hysteresis value, double-click’ -〃, the decimal point will flash, and press ‘+,-‘ to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.
Reset
When the power is off, press and hold both buttons at the same time, and then power on. At this time, ‘888’ is displayed on the screen to indicate that the factory reset is successful.
Factory set protection value:12V, return difference:2V
Scope of application
Suitable for all electric two-wheel tricycle batteries in the applicable voltage ;
Car battery and new energy electric vehicle battery discharge protection;
Over-discharge protection of various batteries;
Solar, wind and other power supply systems.
Instructions
When the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.
When the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.
Slow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.
Reference formula:charging voltage = rated voltage X1.2, charging current = rated current X0.2
Package includes
10 x Battery over-discharge protection module
Weight | 0.28 kg |
---|
Customers Also Viewed
KW-AR-Mini Kit with 17 Classes UNO R3 DC Motor Breadboard LED Components Set Geekcreit for Arduino – products that work with official Arduino boards
$39.35Module KitsAdd to cartFeatureFree TutorialGood kit for Arduino Starter17 ClassesClass 1 Hello Arduino!Class 2 LED Running LightsClass 3 Key ExperimentClass 4 AD Analog-to-Digital conversationClass 5 PWM ExperimentClass 6 Buzzer ExperimentClass 7 The Temperature Sensor ExperimentClass 8 Photosensitive Light ExperimentClass 9 Fire Alarm ExperimentClass 10 Infrared Remote ControlClass 11 UltrasonicClass 12 8-Bit Digital Display ExperimentClass 13 4 x 8 …
2Pcs Mini Football Soccer Goals for Training Junior Kids Children
$136.93Carbon FiberAdd to cartSpecificationsMaterial:Nylon & G-carbonSize:1200*810*810mmColor:Red&GreenWeight:820gFeatures1. This item is great for junior soccer players to practice their shooting accuracy, or just to have fun and play some shooting games.2. Easy to Set Up–The pop up soccer goals are super easy to set up, your kids maybe can do that all on his own, or call some friends to …
2Pcs Mini Football Soccer Goals for Training Junior Kids ChildrenRead More
5pcs 2S 10A 7.4V 18650 Lithium Battery Protection Board 8.4V Balanced Function Overcharged Protection
$19.20Battery Protection ModuleAdd to cartSpecificationsModel:HX-2S-JH20 Overcharge voltage range:4.25±0.05vSize:46.7*23*3.15mm Over-discharge voltage range:2.9v±0.05vUpper limit working current:10A Working temperature:-40—+50°CUpper limit instantaneous current:20A Storage condition:-40– +80°CQuiescent current:less than 10uA Internal resistance:less than 300mΩ Short circuit protection:protection, charge recoveryCharging voltage:8.4V-9VWelding Point Description· B+ is connected to the battery positive pole;· B- is connected to the negative pole of the battery;· MB is connected to …
55Pcs/Set Silicone Casting Molds and Tools Jewelry Pendant Resin Mould DIY
$38.46Painting Teaching ToolsAdd to cartFeatures-This set of making tool is especially designed for DIY expoxy resin crafts, including silicone mold,spoon,sequin,drill,nails and so on.-Different silicone molds have different shapes for you to choose,which may accurately match your various needs.-It is easy control with the reliable quanlity as well as the efficence. -The superior DIY tools for your craft works.SpecificationMaterials:Silicone,MetalType:Making ToolsQuantity:55pcs,one …
55Pcs/Set Silicone Casting Molds and Tools Jewelry Pendant Resin Mould DIYRead More
DIY thermoelectric Peltier Semiconductor Refrigeration Cooling System + Fan Kit
$27.54Electronic Accessories & SuppliesAdd to cartFeaturesSimple operation, strong practicabilityFast cooling, outstanding effectPower supply:12V 15AFan power rate:about 5WFan size:40*40mm Cooling profiles:40*40mm for inlet tube:8mm Screws:3mmNoteMust fititng radiator heartsink when power on, or it will burn the kitThis kit does not comes with PeltierPackage included1 x DIY Thermoelectric Peltier Refrigeration Cooling Kit
5pcs I2C 8-bit I/O Expander Module PCA8574AD Expansion Board RobotDyn for Arduino – products that work with official for Arduino boards
$45.20Expansion Board & ShieldAdd to cartFeatureIf you just don’t have enough digital I/O pins on your for Arduino to interface with all your sensors and controls, you might want to look at using the I2C bus to connect a few port expander chip PCA8574AD have 8 digital I/O bits and can be set to addresses 0x38-0x3F respectively.The I2C bus on …
Ebyte E70-DTU-433NW30-GPRS GPRS Modem 6.5km Wireless Networking Equipment 433MHz 30dbm Networking LoRa RF Module lOT Gateway
$260.04Smart ModuleAdd to cartSpecification Model:E70-DTU-433NW30-GPRSProduct name:iot gatewayProduct advantages:Star self-organizing networkTransmission type:GPRSInterface Type:RS232/RS485Frequency band:433MHzTransmission Range:6.5kmSupply voltage:8 ~ 28V DCSize:108*75*37mmInterface:RS232 RS485Application:Industry Network TransmissionPackage included1 x LoRa RF Module
Reviews
There are no reviews yet.