Automatic Irrigation Module DIY Set for Soil Moisture Detection and Automatic Water Pumping
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This product does not need programming, not include the microcontroller, so we don’t provide any code.
We don’t provide power, you can use the charging treasure (5V DC) as a power supply, or use 4 AA batteries.
About Testing
1. Test the relay module:connect the relay module VCC to 5V, GND to the ground, and IN to GND, the relay is will beat, if IN is vacant, the relay will restored, so you can hear the “Kaka” sound;
2. Test the soil moisture sensor module:connect the fork probe and transmitter module with two dupont cable, connect the transmitter module VCC to 5V, and GND to the ground. The red power lamp is always on as soon as it is powered on, and the green (blue) led will gleam for once; put the fork probe directly into the water, the green (blue) light will on;
3. Connect the red line of the pump to 5V, black wire to the ground, the water pump will start work. Note that:the test can be performed for 1 second. because it can not expose to the air for a long time.
4. According to the schematic assembly.
Note
1. This product needn’t welding, but it requires you to strip the wire, twist the copper wire together and protect it with black tape.
2. The pump can not run a long time in the air;
3. Connect the system and power, the pump will work all time, it is right, because in the air, the probe can not detect the humidity, if install it to the flowerpot, then it can normally work.
Note:Do not pour water directly onto the soil probe. If the humidity of the water is too high, it will cause the product to rust and become inoperable.
4. Pump without power supply, power supply matched to the other, and water pump is a dc pumps, pump voltage 3 v, with DC3 – use 6 v power supply. (cannot be used directly with 220 v ac voltage)
Pump
DC Voltage:2.5-6V
Working current:130-220mA
Power:0.4-1.5W
Maximum lift:40-110cm / 15.75′-43.4′
Flow rate:80-120L/H
Outside diameter of water outlet:approx. 7.5mm / 0.3′
Inside diameter of water outlet:approx. 4.7mm / 0.18′
Diameter:approx. 24mm / 0.95′
Length:approx. 45mm / 1.8′
Height:approx. 33mm / 1.30′
Wire length:about 15-20cm (red:’ + ‘, black(white):’ – ‘)
Material:engineering plastic
Driving mode:brushless DC design, magnetic driving
Continuous working life of 500 hours
Package Included
1 x L9110S Controller Board
1 x Soil Moisture Probe + Comparison Module
1 x Small Pump
1 x Battery Holder
1 x 50cm Silicone Tube
Weight | 0.062 kg |
---|
Customers Also Viewed
10pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$19.40Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
SZWENGAO WG8-40S1210 8-40V to 12V 10A Automatic Buck Boost Power Converter Car Voltage Regulator Step Down Step Up Module
$39.35Boost & Buck ModuleAdd to cartFeatures*Designed according to CE/RoHS*100% full power, high stability output*100% full load aging test*Imported components*Imported high-quality thermal silica gel potting, waterproof, dustproof and shockproof* Die-cast aluminum alloy shell, small size, simple installation*Internal protection functions such as over current, low voltage, over temperature, short circuit, reverse connection, etc.*Wide voltage input, high conversion efficiency of 88-90%*Long service life …
10Pcs Wemos DS18B20 Module for D1 Mini DS18B20 Temperature Measurement Sensor Module
$36.17Sensor & Detector ModuleAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included10 x DS18B20 Module20 x Long female pin20 x Short female pin20 x Normal pin
ASK Wireless Receiving Module with Decoding EV1527 Encoding Transmitter
$10.92Smart ModuleAdd to cartFeaturesThe latest anti-lost code self-recovery function solves the trouble of losing code.The latest anti-interference software is involved to prevent accidental startWidely compatible, PT2262, PT2260, EV1527, PT2240, etc.Ultra-wide pulse width range:105 to 515 oscillating resistorsIn jog mode:support combination codeSelf-locking mode:support combination codeIn the interlock mode:4 independent open and close, the combination code is closedYou can learn …
ASK Wireless Receiving Module with Decoding EV1527 Encoding TransmitterRead More
50W 18V Monocrystaline Al-Alloy at back Solar Panel Dual 12V/5V DC USB Charger for Car RV Boat
$88.07Smart Robot & Solar PanelAdd to cartFeatures– EVA+PET at front panel and Al-Alloy at back, light-weight but durable.– USB and DC output interface for more purpose.– Equipped with 12V DC5.5×2.1 & 5V USB output interface.– Dedicated for 12V battery and 5V device charging. – High output 3000mAh USB, can full-charge an iX in 1.5h in max power.– Mono-crystalline solar Cell with …
Reviews
There are no reviews yet.