Automatic Irrigation Module DIY Set for Soil Moisture Detection and Automatic Water Pumping
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This product does not need programming, not include the microcontroller, so we don’t provide any code.
We don’t provide power, you can use the charging treasure (5V DC) as a power supply, or use 4 AA batteries.
About Testing
1. Test the relay module:connect the relay module VCC to 5V, GND to the ground, and IN to GND, the relay is will beat, if IN is vacant, the relay will restored, so you can hear the “Kaka” sound;
2. Test the soil moisture sensor module:connect the fork probe and transmitter module with two dupont cable, connect the transmitter module VCC to 5V, and GND to the ground. The red power lamp is always on as soon as it is powered on, and the green (blue) led will gleam for once; put the fork probe directly into the water, the green (blue) light will on;
3. Connect the red line of the pump to 5V, black wire to the ground, the water pump will start work. Note that:the test can be performed for 1 second. because it can not expose to the air for a long time.
4. According to the schematic assembly.
Note
1. This product needn’t welding, but it requires you to strip the wire, twist the copper wire together and protect it with black tape.
2. The pump can not run a long time in the air;
3. Connect the system and power, the pump will work all time, it is right, because in the air, the probe can not detect the humidity, if install it to the flowerpot, then it can normally work.
Note:Do not pour water directly onto the soil probe. If the humidity of the water is too high, it will cause the product to rust and become inoperable.
4. Pump without power supply, power supply matched to the other, and water pump is a dc pumps, pump voltage 3 v, with DC3 – use 6 v power supply. (cannot be used directly with 220 v ac voltage)
Pump
DC Voltage:2.5-6V
Working current:130-220mA
Power:0.4-1.5W
Maximum lift:40-110cm / 15.75′-43.4′
Flow rate:80-120L/H
Outside diameter of water outlet:approx. 7.5mm / 0.3′
Inside diameter of water outlet:approx. 4.7mm / 0.18′
Diameter:approx. 24mm / 0.95′
Length:approx. 45mm / 1.8′
Height:approx. 33mm / 1.30′
Wire length:about 15-20cm (red:’ + ‘, black(white):’ – ‘)
Material:engineering plastic
Driving mode:brushless DC design, magnetic driving
Continuous working life of 500 hours
Package Included
1 x L9110S Controller Board
1 x Soil Moisture Probe + Comparison Module
1 x Small Pump
1 x Battery Holder
1 x 50cm Silicone Tube
Weight | 0.062 kg |
---|
Customers Also Viewed
5pcs XH-M172 intermittent Working Module 0-999 Minutes Timing Working Module Output Switch Control Board
$41.46Power Supply ModuleAdd to cartFeatureProduct Name:Intermittent working moduleProduct model:XH-M172Input voltage:DC12VOutput type:relay output 10AService life:more than 100,000 timesWorking temperature:-30~60 degreesSetting range:1-999 minutesProduct size:53 x 35 x 16mmPackage includes5 x Intermittent working module
3 Axis GRBL USB Driver offline Controller Control Module LCD Screen SD Card for CNC 1610 2418 3018 Wood Router Laser Engraving Machine
$38.46Engraving Parts & AccessoriesAdd to cartDescriptionThis offline controller is designed for the use of Mini CNC router 1610/2418/3018 and even with more advanced function of tool set, limit switch supportive, Laser supportive; Offline and Bluetooth supportive.SpecificationFirmware:GRBL 08, 09, 1.1and so onInput Voltage:DC 7V- 36VApplicable CNC Router:3 Axis CNC router 1610; 2418; 3018Features1. Support GRBL and benbox firmware.Support CNC 3-axis laser …
Single Chip Microcomputer DC Motor Control Module L6201 Driver Module
$14.49Other Module BoardAdd to cartDescription The dc motor drive module is the L6201 chip drive module.L6201 is full control bridge drive chip ,which adopting multi sourcing technology BCD (Bipolar, CMOS, DMOS) to control motor. This chip can integrate independent DMOS field-effect transistors with CMOS and diodes on a single chip.L6201 can realize the optimization of logic circuits and power …
Single Chip Microcomputer DC Motor Control Module L6201 Driver ModuleRead More
ESP32S ESP32 0.5A Micro USB Charger Board 18650 Battery Charging Shield without Battery
$10.92Expansion Board & ShieldAdd to cartSpecifications Input port:Micro USB USB output type:Type-A 0.5A current charging 1 switch control USB output Input Voltage:5~8V Output:3V & 1A (x3)and 5V & 4A (x3) LED indicate:Green means full,Red means charging Size:9.8×2.9cm Note Be careful of inch+inch and inch-inch, You should follow the direction of inch+inchinch-inch on the PCB.If you put wrong direction, charging chip …
ESP32S ESP32 0.5A Micro USB Charger Board 18650 Battery Charging Shield without BatteryRead More
Red Laser Dot Sight Scope 20mm Picatinny Rail with 25mm Flashlight Ring Mount Clamp Holder
$26.31Laser SightAdd to cartNotice (Please read this first)1. This item runs on 3pcs AG13 / LR44 Batteries which are Not Included. You need to buy them at your Local Shop. Hope you consider it before order.2. Besides, The laser light image shown here is for reference only. In actual use, the laser light beam is INVISIBLE and it …
Red Laser Dot Sight Scope 20mm Picatinny Rail with 25mm Flashlight Ring Mount Clamp HolderRead More
Reviews
There are no reviews yet.