600×448 5.83inch E-ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI interface
$145.58
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600×448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
More infor for you to know more
Features
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Operating voltage:3.3V~5V
Interface:SPI
Outline dimension:125.40mm ≠ 99.50mm
Display size:118.80mm ≠ 88.26mm
Dot pitch:0.198 ≠ 0.197
Resolution:600 ≠ 448
Display color:red, black, white
Grey level:2
Full refresh time:14s
Refresh power:26.4mW(typ.)
Standby power
Viewing angle:>170
Interface
SYMBOL DESCRIPTION
VCC 3.3V~5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active
Explanation
1. Refresh time:This refers to the global refresh time, that is, the time it takes to refresh each frame of the image; if the ink screen itself supports partial refresh, the partial refresh time is about 0.3 seconds
2. Pi interface:based on the standard interface design, suitable for Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +
Package Included:(raspberry pi board not included)
5.83inch e-Paper (B) x1
e-Paper Driver HAT x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1
Weight | 0.143 kg |
---|
Customers Also Viewed
5pcs 1206B 3A PWM DC Motor Speed Controller 6V/12V/24V Speed Regulating Switch Electronic Governor Dimmer
$39.45Motor PWM Speed ControllerAdd to cartDescriptionModel:1206BKVoltage:12VPower mode:DC powerVoltage range:DC 6V-28VCurrent range:Within 3ASwitch function:YesSize:57mm*37mmPackage Included5 x Motor Speed Governor
100W 18V High Efficieny Solar Panel USB DC Monocrystalline Solar Charger for Car RV Boat Battery Charger Waterproof
$105.29Solar PanelAdd to cartFeature– Suitable for campers, boats, houses, gardens, shacks or farms– Provide appropriate power for TVs, laptops, lights, refrigerators and other operating equipment.– Flexible board, lightweight and easy to install.– Suitable for RVs, boats, small spaces or crowded areas.SpecificationSolar panelMaterial:Monocrystalline SiliconSize:510x280x3.0mm/20.08×11.02×0.12inPower:100WOpen Circuit Voltage:18VShort circuit current:2AOutput Voltage:DC 18V&9V, USB 5V, Type-C 5VWaterproof grade:IP65Conversion:23-24%Applicable to:Bicycle, mountaineering, hiking, camping, …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
$13.11Sensor & Detector ModuleAdd to cartDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, while also computing power. The …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor ModuleRead More
Reviews
There are no reviews yet.