Modbus RTU Octal Relay Module RS485 / TTL UART 8 inputs 8 Outputs Switch Board
$41.54
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Manual:Click here to open
Feature
1. Onboard mature and stable STM8S103K3T6 MCU and MAX485 level conversion chip
2. Communication protocol:support standard Modbus RTU protocol
3. Communication interface:support TTL UART interface with RS485 / 5V level
4. Communication baud rate:4800/9600/19200, default 9600bps, support to save after power off
5. The signal range of optocoupler input:DC3.3-30V (this input cannot be used for relay control)
6. Output signal:relay switch signal, support manual, flash off, flash off mode, flash off / flash delay base is 0.1S, maximum flash off / flash time can be set to OxFFFF * 0.1S = 6553.5S
7. Device address:range 1-255, default 255, support to save after power off
8. Baud rate, input signal, relay status, device address can be read using software / command
9. On-board 8-channel 5V, 10A / 250v AC, 10A / 30vDC relay, which can be continuously attracted 100,000 times, with diode bleed protection, short response time
10. Onboard relay switch indicator
11. STM8 SWIM program is reserved for programming, supporting customers to download their own firmware for secondary development
12. Power supply voltage:DC7-30V, 5.08mm terminal power supply
Package includes
1 x Realy board
1. VCC, GND:DC7-30V 5.08mm power input terminal
2. DC3.3-30V optocoupler signal input
IN1-IN8:Positive channel 1-8
GND_IN:Channel 1-8 common negative
3. A+, B-:RS485 communication interface, A +, B- are connected to A +, B- of external control terminal respectively
4. 5V, SWIM, GND, NRST:STM8 SWIM program download port
5. TXD, RXD, GND:TTL level UART communication interface, TXD, RXD, GND are connected to RXD, TXD, GND of the external control terminal, only support 5V level TTL module / MCU. Use wiring order suggestion:Modbus Power-Modbus module connects to TTL module-TTL module is powered on
6. RST:MCU reset button
7. Relay switch signal output
NO:Normally open, the relay hangs before pull-in, short-circuit with COM after pull-in
COM:Common
NC:Normally closed end, the relay is short-circuited with COM before pull-in, and hangs up after pull-in
Weight | 0.154 kg |
---|
Customers Also Viewed
5pcs 3S NiMH NiCd Rechargeable Battery Charger Charging Module Board input DC 5V
$26.35Power Supply ModuleAdd to cartDescriptions3-Cell(3S) VersionInput voltage:DC 4.5V-5.5V(Recommend DC 5V)Charging voltage about:4.05V-5.1VCharging current about:230mA-240mAUSB power protectionShort circuit protection and zero volt battery activationBattery protectionOperating ambient temperature:-40° to +85°Storage temperature:-65° to +125°Size:30x 15 x 4mmNoteThe output voltage cannot be measured with a multimeter without a battery. But can be observed with an oscilloscope.Applicationskids toys carDigital CamerasSolar chargingBluetooth ApplicationsAudio equipmentDigital CameraElectronic …
5pcs 3S NiMH NiCd Rechargeable Battery Charger Charging Module Board input DC 5VRead More
5Pcs/Pack 5V 1000mA 165*165mm Monocrystalline Solar Panel Cells with Positive&Negative Cables
$85.54Smart Robot & Solar PanelAdd to cartFeaturesProvide you with high conversion rate and incredibly efficient output.Excellent performance even under the weak sunlight.Portable and solid casing.Application:to charge, for home lighting and different kinds of low-power appliances, for science projects, for solar powered water pump, small solar power system, etc.SpecificationsType:Monocrystalline Size:165*165mmCurrent:1000mA Net Weight:about 600g one packPackage Content:5Pcs x Poly Solar PanelVoltage:5VMPN:Does Not ApplyPackage …
Waveshare 1.54 inch ink Screen Module 152×152 Electronic Paper SPI interface Yellow Black and White 3-color Display
$45.91Display ScreenAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openDatasheet:Click here to openGithub:Click here to openFeaturesNo backlight is needed, and the display content of the last screen can be kept for a long time after power offVery low power consumption, basically only consumes power when refreshingSPI control interface, can be connected to Raspberry/Nucleo and other main control …
Geekcreit DIY Creative Electronic Watch Kit 51 Single-chip LED Digital Tube Clock Training Production Kit
$15.30DIY Electronic KitsAdd to cartDescriptionName:LED Electronic Watch KitPower supply:CR2025 3V button battery (available for testing, there are inevitably extra factors causing insufficient power.)Display:LED red digital tube displaySize:52*52*18mmInstallation:the board need to solder yourself and then assembly the caseFunction:You can press the digital tube button when need to wacth time; it will enter the power saving mode automatically after 5 seconds. …
QFN32 QFP32 Converter SMD To DIP Adapter PCB Universal Board
$3.56Expansion Board & ShieldAdd to cartQFN32 QFP32 Converter SMD To DIP Adapter PCB Universal BoardSpecificationDimension:20.25 x 40.64mm / 0.79inch x 1.60inchThickness:1.5mmPanel:FR4DescriptionThe PCB board has two sides.A side for pin pitch size 0.80mm, B side for pin pitch size 0.80mm.It can be used to convert QFN32/QFP32 (600mil width, 2.54mm pin pitch).You can solder filter capacitors or resistors to increase stability and …
QFN32 QFP32 Converter SMD To DIP Adapter PCB Universal BoardRead More
YJ0007 180W Car Stereo Audio Amplifier Power Boost Board Single 12V input Conversion Double 32V Output
$52.41Boost & Buck ModuleAdd to cartDescriptionAll parts and components of this product are original products, unpretentious and pure in quality; using high-quality original parts not only guarantees safety and quality, but also has a long service life, and more importantly, it is a strong guarantee that the actual performance can reach the design goals.Features1. All components are genuine.2. The main …
Reviews
There are no reviews yet.