Modbus RTU Octal Relay Module RS485 / TTL UART 8 inputs 8 Outputs Switch Board
$41.54
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Manual:Click here to open
Feature
1. Onboard mature and stable STM8S103K3T6 MCU and MAX485 level conversion chip
2. Communication protocol:support standard Modbus RTU protocol
3. Communication interface:support TTL UART interface with RS485 / 5V level
4. Communication baud rate:4800/9600/19200, default 9600bps, support to save after power off
5. The signal range of optocoupler input:DC3.3-30V (this input cannot be used for relay control)
6. Output signal:relay switch signal, support manual, flash off, flash off mode, flash off / flash delay base is 0.1S, maximum flash off / flash time can be set to OxFFFF * 0.1S = 6553.5S
7. Device address:range 1-255, default 255, support to save after power off
8. Baud rate, input signal, relay status, device address can be read using software / command
9. On-board 8-channel 5V, 10A / 250v AC, 10A / 30vDC relay, which can be continuously attracted 100,000 times, with diode bleed protection, short response time
10. Onboard relay switch indicator
11. STM8 SWIM program is reserved for programming, supporting customers to download their own firmware for secondary development
12. Power supply voltage:DC7-30V, 5.08mm terminal power supply
Package includes
1 x Realy board
1. VCC, GND:DC7-30V 5.08mm power input terminal
2. DC3.3-30V optocoupler signal input
IN1-IN8:Positive channel 1-8
GND_IN:Channel 1-8 common negative
3. A+, B-:RS485 communication interface, A +, B- are connected to A +, B- of external control terminal respectively
4. 5V, SWIM, GND, NRST:STM8 SWIM program download port
5. TXD, RXD, GND:TTL level UART communication interface, TXD, RXD, GND are connected to RXD, TXD, GND of the external control terminal, only support 5V level TTL module / MCU. Use wiring order suggestion:Modbus Power-Modbus module connects to TTL module-TTL module is powered on
6. RST:MCU reset button
7. Relay switch signal output
NO:Normally open, the relay hangs before pull-in, short-circuit with COM after pull-in
COM:Common
NC:Normally closed end, the relay is short-circuited with COM before pull-in, and hangs up after pull-in
Weight | 0.154 kg |
---|
Customers Also Viewed
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB System
$45.75Battery Protection ModuleAdd to cartNote:The protective plate cannot be used in parallel.SpecificationsContinuous discharging current:45AInstantaneous diacharge current:100ACharging voltage:67.2VCharging current:45AOver-charge detect:4.28±0.05VProtect delay:100msOver-charge release:4.08±0.05VBalanceDetect voltage:4.2±0.025VRelease voltage:4.2±0.05VBalance current:60±5mAOver-discharge:2.55±0.08VOver-discharge detect delay:50mSRelease voltage:2.9±0.1VDetect voltage:150mVDetect delay:15mSCurrent detect:130±10AResistance:≤15mΩWorking current:≤60uASleep current (when over-discharge):≤10uAWorking temperature:-30~80→Size:120 x 60 x 9mm:Details:Specification:Unit:RemarkCharge:Charging voltage:71.4:VRecharging current:45 (max):ADischarge:Continuous discharge current:45 (max):AInstantaneous discharge current:150 (max):AOvercharge protection:Overcharge detection voltage:4. 25 ±0.025:V:Single coreOvercharge protection delay:100:mSOvercharge release voltage:4. 05 …
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB SystemRead More
25W 5V Foldable Solar Panel Solar Power Bank Pack with Dual USB Port for Backpack Camping Hiking
$78.68Smart Robot & Solar PanelAdd to cartFeatures∵ High-Efficiency Ponocrystalline Cell, up to 19%.∵ Eco-friendly & durable material.∵ Applied in charging 5V device as a power bank.∵ Portable, foldable and lightweight, with buckle to be fold firmly.∵ Produce continuous stable output even in cloudy day.∵ Suitable for outdoor activities, outdoor working or emergency.ParametersPmax:25WUSB Output Voltage:5VUSB1 Output Current:2000mA USB2 Output Current:1200mAQuantity of Single …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328
$66.77DIY Electronic KitsAdd to cart3Pcs DIY Multifunction Transistor Tester Kit For LCR ESR Transistor PWM Signal Generator M328FeatureA key measurement operation , auto power off delay . Shutdown current is only 20nA, support battery operation.Automatic detection PNP and NPN type bipolar transistors , N, P -channel MOSFET, JFET FET , diodes , two diodes, thyristors , resistors , capacitors …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328Read More
5pcs 2 Slots AAA Battery Box Battery Holder Board with Switch for2xAAA Batteries DIY kit Case
$9.36Other Module BoardAdd to cartSpecificationsSupport Model:AAA BatteryShell material:ABS Cable:1007 (150mm)Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.Size:53*24*13 mmPackage Included5 x 2 Slots AAA Battery Holder Plastic Case Storage Box
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$86.01Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10A
$18.51Relay ModuleAdd to cartDescriptionTiming from Microseconds to HOURSSimple CircuitryPrecision Pulse Generation / Timing,FMAX = 500 KHzUse a single 4 to 16 VDC supplyExcellent temperature stability 0.005% / °CAdjustable Duty CycleCountless Application and Information SourcesChip (NE555) CharacteristicWhen unconnected with the supply power, the state of the module is inchNOinch [ normal open ], CB and COM are conductive. CK …
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10ARead More
Reviews
There are no reviews yet.