GY-AMG8833 IR 8×8 infrared thermal Imager Sensor Array Temperature Measurement Sensor Module with UNO R3 GY-AM Kit
$129.99
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Introduction
This sensor is an 8×8 thermopile array. This means you have a 64-pixel square array, each of which can independently detect temperature. It’s like having a thermal imaging camera (or carnivores’ vision), but with low resolution. It is part of the Qwiic system, so it is easier to connect to obtain low-resolution infrared images.
When connected to your microcontroller (or Raspberry Pi), it will return a set of 64 individual infrared temperature readings via I2C. It’s like those fancy cameras, but compact and simple for easy integration. The AMG8833 is the next-generation 8×8 thermal infrared sensor and provides higher performance than the previous AMG8831. The sensor only supports I2C and has a configurable interrupt pin, which can be triggered when any single pixel is above or below the threshold you set.
The AMG8833 infrared thermal imager sensor temperature measurement range is 0 C to 80 C (32 F to 176 F) with an accuracy of +-2.5 C (4.5 F). It can detect humans from a distance of up to 7 meters (23) feet. The maximum frame rate is 10Hz, which is ideal for creating your own body detector or mini thermal imager. We use this breakthrough code on Arduin0 or compatible (sensors communicate via I2C) or Raspberry Pi using Python. On the Pi, with the help of the image processing of the SciPy python library, we can insert an 8×8 grid and get some very good results!
Parameter
Working voltage (start):1.6V-3.6V
Working voltage (timing):1.5V-3.6V
Current consumption:4.5 mA
8×8 thermopile array
Temperature range:0 C to 80 C (32 F to 176 F)
Accuracy:÷ 2.5 C (÷ 4.5 F)
Human detection distance:7 meters or less (22.966 feet)
I2c address:0x69 (open jumper, default) or 0x68 (close jumper)
Package includes
1 x GY- AMG8833 IR 8×8 infrared camera sensor
1 x UNO R3 board
1 x USB cable
1 x Jumper cable
1 x 8*8 LED board
Weight | 0.147 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.