5pcs 8*Array LED IR 10m-30m DC12V PCB Board 63x33mm infrared Light Board Night Vision for CCTV Array IR Bullet Camera
$34.25
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Features
1. DC12V IR LED PCB board for size 75 IR bullet camera casing, PCB outer diameter about 63mm, inner hole diameter about 33mm.
2. This LED PCB board is for working with size 75 IR bullet camera casing model of array IR LED board.
3. Power supply exceeds DC 13V may greatly reduce the LEDs’ service life.
4. Matching Lens:90 degrees LED board – 3.6/4mm (This short IR distance and wide angle LED board. No other angle options are available.)
5. Constant current and voltage design.
6. Adopt imported high quality lens for even lighting.
7. Working temperature control under 50C degrees.
8. Array LED service life up to 20,000 hours.
9. IR CUT connector available on LED board
10. 20mil chip, 850nm IR
Package Included
5 x 8*Array LED IR 10m-30m DC12V 63x33mm Infrared Light Board
| Weight | 0.055 kg |
|---|
Related products
Programmable RGB Light Strip Expansion Board Colorful LED Module Supports Cascading Colorful 3-color Light Strip
$13.43LED BoardAdd to cartSpecificationName:Colorful LED ModuleCompatible with Arduino/micro:bit controllerUsed for Programmable RGB light strip expansion boardPackage included1 x RGB light bar2 x connecting wire (20cm, 7.5cm)
5pcs 48*LED 850nm Illuminator IR infrared Light Board Night Vision for CCTV Camera 12V DC
$24.85LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features– Infrared illuminator board for CCTV security cameras– Replace a camera LED board for your broken or worn out IR LED board– Bright infrared LEDs without much energy consume– Suitable for camera …
5pcs 48*LED 850nm Illuminator IR infrared Light Board Night Vision for CCTV Camera 12V DCRead More
KY-011 5mm 2 Color Red and Green LED Common Cathode Module Board for Arduno Diy Starter Kit 2-color KY011
$4.36LED BoardAdd to cartSpecificationsColor:Green + RedDiameter:5mmPackage Type:DiffusionVoltage:2.0-2.5vCurrent:10mAViewing angle:150 degreeWavelength:571 +644 nmLuminous intensity (MCD):20-40; 40-80Stent type:long-leggedPackage Included1 x KY-011 Two Color Red and Green LED Module for Arduno
AK-DB16L-MIC 16-bit Voice-activated Music Level Light High-sensitivity MIC Signal Acquisition Noise Cancellation Function
$60.13LED BoardAdd to cartSpecificationsModel:AK-DB32B-PROInput:5V/150MA (Over 5V may damage the light board. The current can be greater than 150ma, there is no fixed upper limit)Some power supplies have fast charge and high voltage output function, please do not use this kind of chargerOutput:about 2.5WInput port:MicroUSBDimensions:118*16*18.8mmNet weight:86gMaterial:One-piece molding, AnodizingFeaturesBuilt-in highly sensitive microphone (sound-controlled).Aluminum alloy integrated molding housingCustomize LED lighting mold …
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.