Tone Version 50W*2 bluetooth 5.0 Audio Power Amplifier Board Module High and Low Bass Adjustment Subwoofer Dual Channel Stereo ZK-502T Hi-Fi
$41.54
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
Product name:50W Bluetooth audio power amplifier module with tone
Product model:ZK-502T
Bluetooth version:5.0 (unobstructed, 10 meters)
Signal to noise ratio:> 90dB
Input method:AUX + Bluetooth
Channel:Left and right dual channels (stereo)
Amplifier chip:TPA3116D2 (with AM interference suppression function)
Adaptable power supply:DC9 ~ 24V / 2A or more (the higher the voltage, the greater the output power)
Adaptable speakers:15 ~ 100W, 4 ~ 8┯
Output power:15W * 2 @ 12V, 8┯ / 30W * 2 @ 24V, 8┯ / 20W * 2 @ 19V, 8┯ / 30W * 2 @ 12V, 4┯ / 40W * 2 @ 19V, 4┯ / 50W * 2 @ 24V, 4┯
Protection mechanism:overvoltage, undervoltage, overheat, DC detection, short circuit protection
Product size:110mm * 70mm * 21mm
Product weight:154g (including packaging)
Prompt
Only when the audio input is sufficient and the power supply voltage / current is sufficient, will there be enough output power!
The higher the power supply voltage, the greater the output power, the smaller the speaker impedance, the greater the output power!
Please make sure that the power of the adapted power supply is greater than the actual working power of the amplifier!
Package includes
1 x Audio Power Amplifier Board kit
Question & Answer
Q1. How to choose the power supply
A:The power supply of the board is very important. The higher the voltage, the higher the current, and the greater the output power. If you only have 12V 1A, you can use a 3-4 inch speaker. If you are above 19V 5A, there is no problem with 8-10 inch speaker, the power supply must be highly valued. If the voltage is too low, the sound will be easily distorted after the sound is amplified. If the current is too small, the speaker will pull down the voltage, and will not work properly or the sound quality will deteriorate.
It is recommended to use 18V/19V/24V power supply, the current is more than 3A. If you only have a 9V/12V or 1A, 2A power supply, it can also be used but the power is small. Note that the maximum volume during use may be distorted and affect the sound quality.
Q2. How to choose speakers
A:The commonly used speakers are generally 8 ohms, and the positive and negative polarities can be distinguished. The effect is the same. 4 ohm speakers can also be used. If your speaker power is small, it may be usable between 10W-30W. The supply voltage is lower to prevent the speaker from being burned after the sound is amplified. For example, choose a power supply below 15V. If you are a 50W-100W speaker, you don’t need to worry about the problem of speaker burnout, you can choose a 12-24V power supply, the higher the voltage, the greater the output sound or power. Speaker power should not exceed 100W, otherwise it will affect the sound quality.
Q3. How to select the audio input mode
A:This audio power amplifier module follows the principle of hardware connection priority. USB connection is successful in USB mode, AUX plug-in is in AUX mode. If USB is not connected and AUX is not plugged in, it is Bluetooth mode, Bluetooth mode supports automatic connection back. There is a mode prompt tone when the mode is switched. When selecting the USB audio input mode, it should be noted that USB can be directly connected to devices such as computers with USB audio output, without installing a driver. USB input is lossless input, good sound quality, no interference, no noise.
Q4. The sound is okay. When the sound becomes louder, does the sound appear muddy
A:The sound is distorted. Please change the power supply of the adapter with higher voltage level.
Q5. It’s okay when the sound is small, but when the sound becomes louder, the sound freezes
A:There may be two reasons:1. Insufficient input power, intermittent power-off protection of the power supply itself, please replace with a larger power supply; 2. Too much power, the power amplifier board heats up seriously, and thermal protection occurs. Should reduce the use of power or strengthen heat dissipation.
Weight | 0.154 kg |
---|
Customers Also Viewed
LM338K 3A Voltage Digital Display High Power Adjustable Linear Module Buck Step Down Regulator
$29.73Power Supply ModuleAdd to cartParameterBoard size:9.6cm x 5.8cmDC input:3-35 voltsAC input:1-25 voltsOutput DC:1.2-30 volts; kit weight:155 gramsMaximum current:3 amps, (LM338K theory can go to 5A, we use domestic LM338K, up to 3A, import disassemble up to 5A)Input and output minimum differential:3 voltsMaximum power consumption:50WAbout LM338K maximum power calculationFor example, input 25V, output 18v load current 2A, then the power …
5Pcs Yushun LS-5S 24V 5W AC to DC Switching Power Supply Module Monitoring Power Supply with White Shell
$32.16Power Supply ModuleAdd to cartFeatures1. Wide input voltage range2. With overload, short circuit and over temperature protection functions3. Small size, high efficiency4. Full load aging test5. Ultra-low output rippleSpecificationBrand:EshionModel:LS-5SVoltage:24V200mA LS-5S24Modulation method:pulse width modulation (PWM) typeTransistor connection mode:single-endedInput voltage:86-264VInput voltage range:100~264V ACOutput /Rated power:5WOutput voltage:24VWork efficiency:75%~76%Output ripple noiseVoltage adjustment rate:÷1%Load regulation rate:÷1%Product Certification:CEOutput current:0.2AFrequency range:47~63HZWorking temperature:-20→~+50→Dimensions:58mm*30mm*22mmWeight:25g(1pcs)Package included5 x Power Supply …
SIM7020C NB-IoT Expansion Board Full Netcom Module Support for Arduino LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS
$52.47Expansion Board & ShieldAdd to cartFeatureOnboard Raspberry Pi interface, can be directly inserted into any version of Raspberry PiSupport LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS and other protocol communicationsSupport domestic OneNET/telecom cloud/aira cloud platformOnboard USB interface, can be used for power supply or software debuggingLead out UART control interface, can be used to connect Arduino/STM32 and other main control boardsOnboard level conversion circuit, the default …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY Kit
$21.59Display ScreenAdd to cartDescriptionIt can be inserted directly into Breadboard,Ideal for linking up to your Arduiuo UNO Mini Nano Mega2560 DUE Breadboard etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 STC MSP430 FPGA/CPLD etc.) SpecificationsColor:BlueWorking Voltage:DC 3-24VPolarity:Common anodeInterface:2.54MM with PIN/2.54MM no PINSize:22.86 x 14.13 x 2.11 mmWeight:1.3gApplicationMCU/ARM/FPGA/Atmega328pPLC MotorElectronic diy kitESP8266/nodemcuNANO/UNO/MEGA2560/BreadboardRaspberry pi 4/robotPackage Incldued10 x …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY KitRead More
infrared Light Board 42*IR LED Board for CCTV Camera Night Vision 850nm DC12V
$6.55LED BoardAdd to cartDescription– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsBoard Diameter:60 mminner Diameter:32mmPower Supply:DC12V / 220mA Operation Temperature:-10→ to +50→LED Lamps / Bulbs Size:5mmIR Lights WaveLength:850nmPackage Included1 x 42*IR LED Board for CCTV Camera
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power Amplifier
$15.27Amplifier BoardAdd to cartFeatures∵ Operating current:>1A∵ Power Output:3~5W∵ Drive Speaker:4~8∵ SNR:85dB@ VDD=5V,Vorms=1V∵ Class D Audio Amplifier∵ Low Distortion, Low Noise FloorNotes1.2.5V to 5.5V operation from a single supply ,and damaged upper 5.5V.2.A 5V/1A DC adapter is recommended to supply the module.3.The circuit will be damaged if the power polarity is oppsite.4.4 3W Speaker is recommended5.With mute fuction, Mute …
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power AmplifierRead More
10Pcs 2 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$16.11Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:40*20mmPackage Included10 x 2 Key Press Film Switch
Reviews
There are no reviews yet.