Tone Version 50W*2 bluetooth 5.0 Audio Power Amplifier Board Module High and Low Bass Adjustment Subwoofer Dual Channel Stereo ZK-502T Hi-Fi
$41.54
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
Product name:50W Bluetooth audio power amplifier module with tone
Product model:ZK-502T
Bluetooth version:5.0 (unobstructed, 10 meters)
Signal to noise ratio:> 90dB
Input method:AUX + Bluetooth
Channel:Left and right dual channels (stereo)
Amplifier chip:TPA3116D2 (with AM interference suppression function)
Adaptable power supply:DC9 ~ 24V / 2A or more (the higher the voltage, the greater the output power)
Adaptable speakers:15 ~ 100W, 4 ~ 8┯
Output power:15W * 2 @ 12V, 8┯ / 30W * 2 @ 24V, 8┯ / 20W * 2 @ 19V, 8┯ / 30W * 2 @ 12V, 4┯ / 40W * 2 @ 19V, 4┯ / 50W * 2 @ 24V, 4┯
Protection mechanism:overvoltage, undervoltage, overheat, DC detection, short circuit protection
Product size:110mm * 70mm * 21mm
Product weight:154g (including packaging)
Prompt
Only when the audio input is sufficient and the power supply voltage / current is sufficient, will there be enough output power!
The higher the power supply voltage, the greater the output power, the smaller the speaker impedance, the greater the output power!
Please make sure that the power of the adapted power supply is greater than the actual working power of the amplifier!
Package includes
1 x Audio Power Amplifier Board kit
Question & Answer
Q1. How to choose the power supply
A:The power supply of the board is very important. The higher the voltage, the higher the current, and the greater the output power. If you only have 12V 1A, you can use a 3-4 inch speaker. If you are above 19V 5A, there is no problem with 8-10 inch speaker, the power supply must be highly valued. If the voltage is too low, the sound will be easily distorted after the sound is amplified. If the current is too small, the speaker will pull down the voltage, and will not work properly or the sound quality will deteriorate.
It is recommended to use 18V/19V/24V power supply, the current is more than 3A. If you only have a 9V/12V or 1A, 2A power supply, it can also be used but the power is small. Note that the maximum volume during use may be distorted and affect the sound quality.
Q2. How to choose speakers
A:The commonly used speakers are generally 8 ohms, and the positive and negative polarities can be distinguished. The effect is the same. 4 ohm speakers can also be used. If your speaker power is small, it may be usable between 10W-30W. The supply voltage is lower to prevent the speaker from being burned after the sound is amplified. For example, choose a power supply below 15V. If you are a 50W-100W speaker, you don’t need to worry about the problem of speaker burnout, you can choose a 12-24V power supply, the higher the voltage, the greater the output sound or power. Speaker power should not exceed 100W, otherwise it will affect the sound quality.
Q3. How to select the audio input mode
A:This audio power amplifier module follows the principle of hardware connection priority. USB connection is successful in USB mode, AUX plug-in is in AUX mode. If USB is not connected and AUX is not plugged in, it is Bluetooth mode, Bluetooth mode supports automatic connection back. There is a mode prompt tone when the mode is switched. When selecting the USB audio input mode, it should be noted that USB can be directly connected to devices such as computers with USB audio output, without installing a driver. USB input is lossless input, good sound quality, no interference, no noise.
Q4. The sound is okay. When the sound becomes louder, does the sound appear muddy
A:The sound is distorted. Please change the power supply of the adapter with higher voltage level.
Q5. It’s okay when the sound is small, but when the sound becomes louder, the sound freezes
A:There may be two reasons:1. Insufficient input power, intermittent power-off protection of the power supply itself, please replace with a larger power supply; 2. Too much power, the power amplifier board heats up seriously, and thermal protection occurs. Should reduce the use of power or strengthen heat dissipation.
Weight | 0.154 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.