Ebyte E01-ML01D SPI nRF24L01P 2.4GHz 0dbm nRF24L01+ Radio Wireless Transceiver Module
$6.55
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
E01-ML01D is based on original imported RFIC nRF24L01P of Nordic in Norway. The module uses industrial component with sufficient transmitting power, good spectral characteristics and small volumes. With high-performance PCB antenna and impedance matching, there is no need of an external antenna for embedded development.
RF Parameter
Value
Remark
Working frequency
2400~2525 MHz
Default:2.4GHz (16MHz oscillator)
Transmitting power
0 dBm
Max. Power (1mW)
Receiving sensitivity
-93 dBm
Data rate:250kbps
Data rate
250k~2Mbps
Default:250kbps
Test distance
100m
In open and clear, with maximum power, 5dBi antenna gain, height of 2m, data rate:250kbps
Hardware Parameter
Value
Remark
Size
12.6 * 22.6 mm
Without SMA
Antenna type
SMA-K
Communication interface
SPI
Package
DIP
Electronic parameter
Min.
Typ.
Max.
Unit
Condition
Power supply
2
3.3
3.6
V
Communication level
2
3.3
3.6
V
Transmitting current
12
13
14
mA
0dBm(1mW)
Receiving current
11
12
13
mA
Sleep current
0.5
1
2
┢A
Operating temperature
-40
20
85
→
Operating humidity
10
60
90
%
Storage temperature
-40
20
125
→
Specification
Interface:SPI
Power:0dBm (1mW)
Distance:100m
Supply voltage:1.9V ~ 3.6V DC
Frequency:2.4GHz (2400MHz ~ 2525MHz)
Package Included
1 x Module
| Weight | 0.002 kg |
|---|
Related products
2pcs D1 Mini V3.0.0 WIFI internet of Things Development Board Based ESP8266 4MB MicroPython Nodemcu Geekcreit for Arduino – products that work with official for Arduino boards
$21.86Smart ModuleAdd to cartWhat’s new about V3.0.0Optimize the circuitAdd Deep-Sleep jumper.Default firmware:lastest MicroPython ESP8266 firmware.Features11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)1 analog input(3.2V max input)a Micro USB connectionCompatible with MicroPython, , Nodemculots of ShieldsPackage included2 x D1 mini V3.0.04 x Normal pin4 x Long female pin4 x Short female pin
5pcs M38 Bluetooth 4.2 Audio Receiver Module 5W+5W Lossless Car Speaker Headphone Amplifier Board Wireless Refit
$27.00Smart ModuleAdd to cartFor different needs of customers, we offer 3 versions for you to choose fromFunction / Model:M18 (Product ID:1476791):M28 (Product ID:1486747):M38 (this item)Micro power supply:*:√:√Audio headphone jack:*:√:*Built-in amplifier:*:*:√(5W+5W)Lithium battery powered:√:√:√Support USB sound card, free drive:*:*:√Volume memory/adjustment:√:*:*MUTE mute interface:√:*:*Button extension:√:*:*Bluetooth version:bluetooch V4.2Support Bluetooth protocol:HFPV1.7, A2DPV1.2, AVRCPV1.5, AVCTPV1.2, AVDTPV1.2Format support:Support WAV/WMA/FLAC/APE/MP3 lossless decoding, stereo two-channel outputOperating Voltage:5V/3.7V-4.2VBroadcast status …
5pcs JDY-31 DC 3.6-6V Bluetooth 2.0/3.0 Module SPP Protocol Android Compatible with HC-05/06 JDY-30
$21.21Smart ModuleAdd to cartDetails:Click here to openProduct introductionJDY-31 Bluetooth is based on Bluetooth 3.0 SPP design, which can support Windows, Linux, android data transmission, working frequency 2.4GHZ, modulation mode GFSK, maximum transmission power 8db, maximum transmission distance 30 meters, support users to modify device name through AT command The baud rate and other instructions are convenient and quick …
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.