3pcs USB 3.7V 3.6V 4.2V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board Li-ion Power Supply Board
$6.06
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
Charge module:Linear charging
Current:1A
Charge rate:1.5%
Input voltage:4.5V-5.5V
Full charge voltage:4.2V
Led indicator:Red is charging Green is full charged
Input interface:USB
Work temperature:-10 to +85
Inversed polarity:NO
Size:25 x 19 x 10mm
Note
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
6. NO Reveral polarity.
Package Included
3 x 5V USB 1A 18650 Lithium Battery Charging Board Charger Module
Weight | 0.015 kg |
---|
Customers Also Viewed
20pcs WEAH-122 Speaker Professional Frequency Divider Car Horn Sound Power Crossover
$139.47Amplifier BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeatureBrand:WEAHModel:122Power:110WResistance:4-8ohmSize:100x 54 x 28mmFrequency:750-2000HzFiltering Characteristics:Pure Alto CrossoverPackage includes20 x Frequency Divider
DS18B20 Expansion Board Shield for D1 Mini DS18B20 Temperature Measurement Sensor Module
$6.55Expansion Board & ShieldAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included1 x DS18B20 Module2 x Long female pin2 x Short female pin2 x Normal pin
Human Body Pyroelectric infrared induction Alarm Circuit Kit Welding Electronic Training DIY
$8.73DIY Electronic KitsAdd to cartFeatureBoard size:5*4.9cmPower supply voltage:5-6V DCFunction realizationThe human body infrared sensor alarm circuit is composed of pyroelectric infrared sensor PIR1 (D203S), infrared sensor signal processor U1 (BISS0001), voice chip IC1 (C002) and alarm circuit. The circuit can be used as a home anti-theft, without sound, light, vibration, even in a dark state, once it enters the …
CPU info 1.6 inch LCD 84×48 Memory Display Module with Backlight for Raspberry Pi Zero / 1/2 / 3 /3B+
$22.95Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionThis CPU Info 1.6-inch LCD resolution is 84*48, which can be used in the Pi0/Pi1/Pi2/Pi3 full range of Raspberry Pi. It features a 26Pin GPIO pin header design. The female pin on …
BESTEP 6 Channel 5V Relay Module High And Low Level Trigger
$19.67Relay ModuleAdd to cartDescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage is 5V.Each channel of the module can be set up by high jumper or low level trigger.Fault tolerant design, even if the control line is broken, the relay will not act.Power indicator (green), 6 relay status indicator (red).The …
BESTEP 6 Channel 5V Relay Module High And Low Level TriggerRead More
Reviews
There are no reviews yet.