Speech Recognition Module Voice Sensor Module Non Specific Voice Recognition Voice Control Module Geekcreit for Arduino Raspberry – products that work with official Arduino Raspberry boards
$76.53
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. Using non-specific(SI) speech recognition technology, voice recognition are no special requirements, you can identify the Chinese Mandarin, local dialects and foreign languages.
2. Module has significant anti- noise performance, the 30db, the substantially fully identify 30 to 50 dB more noisy environments, it can be maintained at more than 90% recognition rate.
3. Identify the depth of 32 layers ( can be extended according to user requirements) at depths up to 32 layers can identify phrases 1600, industry-leading.
4. Identify entry way into using pinyin, without programming, to complete the complex zero-based speech recognition technology to provide professional full graphical IDE software settings, easy to use, all settings can be saved project file, suitable for mass downloading.
5. On-board FLASH memory , no SD card, you can add or modify any tone tone for phrases, songs and a variety of sounds, etc., to do a question and answer voice response . All voice by the IDE software can be downloaded quickly.
6. It has a good real-time, end the speech recognition can be obtained within 0.5 second answer.
7. Intelligent settings , you can set timeout identification, identifying state jumps, etc., it can identify subtle adjustment parameters to the module to better adapt to the environment, suitable for complex applications.
8. Rich interfaces, can be RS232 communication , and can also microcontroller TTL232 level communication .
9. Onboard 8 IO interface , status programmable , and can directly drive relay module, the module has been integrated above a relay that can be used to control a large current and voltage.
10. It can be set to trigger recognition mode , you can set the key trigger one-shot or loop.
11. Supports MP3 playback, without external auxiliary devices.
Modules integrated microphone , you can directly access the voice signal.
12. Modules with external audio input interface , you can add a microphone, so that greatly increased recognition distance.
13. Integrated amplifier circuit module can be connected directly to the speaker, the speaker output power interface 550mW, born loud and clear voice.
14. Modules with a stereo headphone jack, can connect headphones or external amplifier, suitable for high-power applications require more.
15. DC 3.3-16V wide voltage power supply
NOTE
Do not connect to downloader when module has connected to external power supply.
Package Included
1 x Speech Recognition Module Voice Module
1 x USB Downloader
1 x Microphone Module
1 x Horn
1 x Relay
1 x Adapter Module
Weight | 0.126 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.