3pcs Dual 2 Mode PWM Square Rectangular Signal Generator Control DC Stepper Motor Driver Board Adjustable Pulse Module
$23.57
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. PWM signal generator, square rectangular signal generator
2. Used to generate square rectangular signals for controlling DC motor or stepper motor driver; used for servo motor, stepping motor, electric gripper, replacing PLC pulse, etc.
3. The supporting driver realizes dimming, speed regulation, control of solenoid , etc., but can not directly drive the load of the electric motor solenoid .
Product Highlights
1. Two modes can be selected
PWM mode – frequency (continuous), duty cycle, pulse number adjustable;
PULSE pulse mode – positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable.
2. With start and stop button, can control the output and stop of the signal
3. Wide voltage input 3.3-30V, with anti-reverse protection, 5.08mm terminal wiring
Technical parameters
1. Working voltage:3.3~30V, with anti-reverse protection
2. Frequency:1Hz~150KHz, accuracy about 2%
3. Duty cycle:0-100%, 1% stepping
4. Number of pulses:1-9999, or infinite (display ‘—-‘ stands for infinity)
5. Delay output time:0.000s-9999s, the can be set 1ms
6. Positive and negative pulse width length:0.000s-9999s, the can be set 1ms
7. Signal loading capacity:less than 30mA
8. Output signal amplitude:amplitude is equal to the supply voltage
9. Product size:60 x 32 x 10mm
10. Product Weight:18g
11. Packing:Anti-static bag
PWM mode (display has ‘%’ for PWM mode)
1. The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays “OUT” mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
If you want to switch to PULSE pulse mode, long-press the SET button (more than 6 seconds), do not release, you will see the screen change, ‘%’ disappears, it is PULSE mode.
2. PULSE pulse mode (No ‘%’ on the right side of the display is displayed in PULSE mode)
The P+ and P- buttons set the positive pulse width time, the LCD screen shows up, the N+ and N- buttons set the negative pulse width time, the LCD screen displays downwards, the unit is seconds; short press the STOP button to control the signal output or stop, stop output It is 0, the screen displays “OUT” mark as output, otherwise it stops output; the default factory positive pulse width is 0.5 second, and the negative pulse width is 0.5 second.
Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. Output pulse; P+ and P- buttons set delay time, N+ and N- buttons set pulse number, factory default delay time is 0 seconds, pulse number is infinite (display —-); Press the button for 2 seconds, automatically return to the pulse interface, press the STOP button, after the delay setting time, start to send the set number of pulses, if the number of pulses is sent, it will automatically output 0, if the period is not sent, press the STOP button. The output pulse will be turned off and cleared, and the number of pulses set will be issued each time it is started.
Application Operation Examples
1. PWM output 20KHZ, 60% duty cycle:Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%.
2. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop:select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -.
3. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop:select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-.
4. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100:select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100.
5. Power-on delay for 10 seconds, then permanently output signal:select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-).
6. Other applications can explore or consult customer service
All setup parameters are not lost when they are turned off.
Package includes
3 x PWM signal generator
Weight | 0.057 kg |
---|
Customers Also Viewed
10Pcs RobotDyn Thyristor AC Switch Relay Module 3.3V/5V Logic AC 220V/5A Peak 10A
$54.90Relay ModuleAdd to cartFeatureIf you need to control the AC power (lights, home equipment’s), a thyristor is what you need. This is a very common thyristor module with very low on-resistance and a control voltage, that is compatible with any 3.3V or 5V micro-controller or mechanical switch. This allows you to control high-power devices with very low-power control …
10Pcs RobotDyn Thyristor AC Switch Relay Module 3.3V/5V Logic AC 220V/5A Peak 10ARead More
Glass Transparent Cell Spreader Bacteria Wide Spreading Bar Polished Ends Biological Experiment
$15.30Laboratory BottleAdd to cartDescriptionGlass Transparent Wide Cell Spreading Bar Used for Biological ExperimentSpecificationMaterial:GlassColor:ClearFeatures1.Suitable for us to swirl the spreader around the dish to evenly distribute the cells or bacteria with applying much pressure.2.Smooth shape end makes spreading easy.3.Eco-friendly Material and good design. 4.Easy sterilization.NoticeThe spreader should be back in alcohol or ethanol to keep it clean and prevent …
3pcs 78M05 Mini Voltage Regulator Module with Pin High Accuracy Low Power Consumption LO7805MA 5V
$6.93Boost & Buck ModuleAdd to cartFeatures1. Used in small power motors, cameras, electric toys, LED lighting, etc.2. The product has high accuracy whose range is ±2%3. With thermal overload protection, short circuit protection and output switching SOA protection4. The product has ±2% output voltage toleranceSpecificationsHigh Accuracy:±2%Quiescent Current:6mAWorking Temperature:-40→ ~ + 125→Size:18 x 10.5 x 5mm5VInput Voltage:DC 7-25V, Output Voltage:DC 5VOutput …
234Pcs Upgraded Outdoor Emergency Survival Kit Gear SOS First Aid for Home office Boat Camping Hiking
$64.79Lab Clamp & StandAdd to cartSpecificationBag Color:RedSize:260*80*180mm(L*W*H)Quantity:234 PCSFeatures– Small size and easy to carry.– First aid dedicated, fully equipped.– A good choice for emergency situation.– Essential items for going out or at home.– Multifunctional, practical and convenient.– With quality hardware zipper, easy to open and close.– Made of high quality material, waterproof, high wear resistance.– Can be used for outdoor …
5Pcs 3S 12.6V 6A BMS Li-ion Lithium Battery Protection Board 18650 Power Bank Balance Battery Board
$24.04Battery Protection ModuleAdd to cartFeatureSize:about 56×33.5x12mmUpper operating current:8AUpper transient current:40A÷5AOvercharge range:4.25÷0.05VOver disvoltage range:2.5÷0.05VCharging voltage:12.6-13VFunction:over charge/ over discharge/short circuit/ over current protectionPackgae includes5 x Battery Protection Board
3Pcs Double End Cleaning Brush Set Brass Steel Nylon Wire Brush Kit
$10.11Laser SightAdd to cartSpecificationMaterial:Brass, Steel, NylonLength:17.2cm / 6.8inchLarge End Brush Size (L*W*H):37x7x12mmSmall End Brush Size (L*W*H):22x2x8mmFeatures– Includes 3 brushes, 3 types of double-ended brushes:Brass, Steel, Nylon.– Versatile cleaning capabilities with both a large and small end, 7 inch total length for cleaning all sorts of hard-to-reach spaces.– The steel and brass brush help to clean stubborn areas on …
3Pcs Double End Cleaning Brush Set Brass Steel Nylon Wire Brush KitRead More
100-240V Power Adapter Power Supply Adaptor Plugs AU Standard
$16.19AC/DC AdaptersAdd to cartPower Supply Adaptor for Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105SpecificationsInput:AC 100-240V, 50/60HzOutput:DC 12V 1AColor:BlackSize(Approximately):7.8*4.9*3.2cm(approx.)Wire length(Approximately):93cmPlug type:AU PlugFeatures-Voltage Protection-Short Circuit Protection-Current Protection-Sealed for protection against moisture and humidityApplicationFor Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105Package included1 x Adaptor
Reviews
There are no reviews yet.