3pcs Dual 2 Mode PWM Square Rectangular Signal Generator Control DC Stepper Motor Driver Board Adjustable Pulse Module
$23.57
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. PWM signal generator, square rectangular signal generator
2. Used to generate square rectangular signals for controlling DC motor or stepper motor driver; used for servo motor, stepping motor, electric gripper, replacing PLC pulse, etc.
3. The supporting driver realizes dimming, speed regulation, control of solenoid , etc., but can not directly drive the load of the electric motor solenoid .
Product Highlights
1. Two modes can be selected
PWM mode – frequency (continuous), duty cycle, pulse number adjustable;
PULSE pulse mode – positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable.
2. With start and stop button, can control the output and stop of the signal
3. Wide voltage input 3.3-30V, with anti-reverse protection, 5.08mm terminal wiring
Technical parameters
1. Working voltage:3.3~30V, with anti-reverse protection
2. Frequency:1Hz~150KHz, accuracy about 2%
3. Duty cycle:0-100%, 1% stepping
4. Number of pulses:1-9999, or infinite (display ‘—-‘ stands for infinity)
5. Delay output time:0.000s-9999s, the can be set 1ms
6. Positive and negative pulse width length:0.000s-9999s, the can be set 1ms
7. Signal loading capacity:less than 30mA
8. Output signal amplitude:amplitude is equal to the supply voltage
9. Product size:60 x 32 x 10mm
10. Product Weight:18g
11. Packing:Anti-static bag
PWM mode (display has ‘%’ for PWM mode)
1. The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays “OUT” mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
If you want to switch to PULSE pulse mode, long-press the SET button (more than 6 seconds), do not release, you will see the screen change, ‘%’ disappears, it is PULSE mode.
2. PULSE pulse mode (No ‘%’ on the right side of the display is displayed in PULSE mode)
The P+ and P- buttons set the positive pulse width time, the LCD screen shows up, the N+ and N- buttons set the negative pulse width time, the LCD screen displays downwards, the unit is seconds; short press the STOP button to control the signal output or stop, stop output It is 0, the screen displays “OUT” mark as output, otherwise it stops output; the default factory positive pulse width is 0.5 second, and the negative pulse width is 0.5 second.
Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. Output pulse; P+ and P- buttons set delay time, N+ and N- buttons set pulse number, factory default delay time is 0 seconds, pulse number is infinite (display —-); Press the button for 2 seconds, automatically return to the pulse interface, press the STOP button, after the delay setting time, start to send the set number of pulses, if the number of pulses is sent, it will automatically output 0, if the period is not sent, press the STOP button. The output pulse will be turned off and cleared, and the number of pulses set will be issued each time it is started.
Application Operation Examples
1. PWM output 20KHZ, 60% duty cycle:Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%.
2. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop:select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -.
3. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop:select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-.
4. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100:select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100.
5. Power-on delay for 10 seconds, then permanently output signal:select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-).
6. Other applications can explore or consult customer service
All setup parameters are not lost when they are turned off.
Package includes
3 x PWM signal generator
Weight | 0.057 kg |
---|
Customers Also Viewed
7L 2 Hole Plastic Fuel Oil Gasoline Tank Air Heater Diesel Car Caravan Motorhome
$56.69Solar CollectorsAdd to cartFeature1. Made of thick and durable plastic.2. 7L large capacity, suitable for for cars / truck air diesel parking heater.3. Fuel level can be noticed by the plastic box.4. Easy to use.Specifications1. Name:7L Fuel Oil Gasoline Tank2. Model:D303633. Color:White & Blue4. Capacity:7L5. Size:approx.39x22x8cm(HxWxD)6. Material:Plastic & MetalPackage Included1 x Fuel Oil Gasoline Tank1 x Screw Kit
3Pcs XKC-Y25-T12V Non-Contact Liquid Level Switch Stick Type Durable Level Sensor Module
$40.82Sensor & Detector ModuleAdd to cartParameterInput voltage:(InVCC) DC 5 ~ 24 VCurrent consumption:5mAOutput voltage(High level):InVCCOutput voltage (Low level):0VOutput current:1 ~ 50mAResponse time:500mSWorking temperature:0 ~ 100 degreeInduction thickness (Sensitivity) Range:0 ~ 20mmCommunication:RS485Humidity:5% to 100%Material:ABSWaterproof:IP67Package included3 x XKC-Y25-T12V Non-Contact Liquid Level Switch
3pcs IB0505LS-1W DC-DC 5V to 5V Isolation Power Supply Module input 4.75-5.25V Output 5V
$17.04Power Supply ModuleAdd to cart>>>Manual:Click here to openOverviewThe IB_LD-1W & IB_LS-1W series are specifically designed for power applications in distributed power systems on the board that require isolation from the input supply. This product is suitable for1) The input power supply voltage changes ≤ ± 5%;2) The isolation voltage between input and output is required to be ≤1000VDC;3) High …
3pcs IB0505LS-1W DC-DC 5V to 5V Isolation Power Supply Module input 4.75-5.25V Output 5VRead More
20pcs DC-DC 12V 3A Power Supply Module Buck Regulator Module 24V 18V To 12V Fixed Output Step Down
$43.40Power Supply ModuleAdd to cartSpecificationsInput voltage:14 – 26VOutput voltage:12VOutput current:3A (Max), the current should be controlled within 0.8A for working long hoursConversion efficiency:96% (Max)Output rippleOperating temperature:-40→ – 85→Dimension:22.3 x 17 x 4.2mm (L x W x H)Package included20 x DC-DC 12V 3A Power Supply Module
5Pcs 3590S-2-103L 10K Ohm BOURNS Rotary Wirewound Precision Potentiometer Pot 10 Turn
$21.55Electronic Accessories & SuppliesAdd to cart5Pcs 3590S-2-103L 10K Ohm BOURNS Rotary Wirewound Precision Potentiometer Pot 10 TurnDescription1. Color:As Pictures2. Resistance:10k ohm3. Resistance Tolerance:±5%.4. Power:2W5. Working Temperature:1→±125→6. Size:L x Dia / 40 x 20mm / 1.57 x 0.78inch7. Diameter of Shank:5mm/0.19inch8. Life Hour:1000 Hours9. Rotating Life:1,000,000 timesPackage include5 x Rotary Wirewound Precision Potentiometers
Transparent Acrylic Raspberry Pi 4B Case Box Support Cooling Fan instal
$9.18Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Installation steps1. Press and hold the corner of the acrylic on the left, and talk about installing the acrylic on the left to the acrylic on the back.2. Attach the acrylic film …
Transparent Acrylic Raspberry Pi 4B Case Box Support Cooling Fan instalRead More
Solar Power inverter 6000W Peak DC 12V To AC 110V Modified Sine Wave Converter
$166.04InvertersAdd to cartFeatures– The inverter can convert DC12V to AC 110V.– Overload, over temperature, short circuit, low voltage, overvoltage protection.– Stable and precise output voltage.– Built-in cooling fan with low noise.– Comes with a car charger and a pair of alligator clip, convenient to use.– Perfect for TV, DVD player and other home appliances.SpecificationsColour BlackContinuous Output:3000 W …
Solar Power inverter 6000W Peak DC 12V To AC 110V Modified Sine Wave ConverterRead More
23*47CM Waterproof 80 LED Solar Street Light 120 Degree with Remote Control
$139.71Solar PanelAdd to cartFeatures– 80 LEDs High-brightness 3030 LED lamp beads, energy saving, even light, longer lasting.– Polycrystalline Solar Panel convert solar energy into electricity, more environmentally friendly.– ABS one-piece housing, high hardness, sealed and waterproof– Easy installation, maintenance-free dependable operation without the need for wiring or trench. Rustproof, waterproof aluminum heavy duty casing. – Please turn on …
23*47CM Waterproof 80 LED Solar Street Light 120 Degree with Remote ControlRead More
Reviews
There are no reviews yet.