10pcs Dual 2 Mode PWM Square Rectangular Signal Generator Control DC Stepper Motor Driver Board Adjustable Pulse Module
$75.25
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. PWM signal generator, square rectangular signal generator
2. Used to generate square rectangular signals for controlling DC motor or stepper motor driver; used for servo motor, stepping motor, electric gripper, replacing PLC pulse, etc.
3. The supporting driver realizes dimming, speed regulation, control of solenoid , etc., but can not directly drive the load of the electric motor solenoid .
Product Highlights
1. Two modes can be selected
PWM mode – frequency (continuous), duty cycle, pulse number adjustable;
PULSE pulse mode – positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable.
2. With start and stop button, can control the output and stop of the signal
3. Wide voltage input 3.3-30V, with anti-reverse protection, 5.08mm terminal wiring
Technical parameters
1. Working voltage:3.3~30V, with anti-reverse protection
2. Frequency:1Hz~150KHz, accuracy about 2%
3. Duty cycle:0-100%, 1% stepping
4. Number of pulses:1-9999, or infinite (display ‘—-‘ stands for infinity)
5. Delay output time:0.000s-9999s, the can be set 1ms
6. Positive and negative pulse width length:0.000s-9999s, the can be set 1ms
7. Signal loading capacity:less than 30mA
8. Output signal amplitude:amplitude is equal to the supply voltage
9. Product size:60 x 32 x 10mm
10. Product Weight:18g
11. Packing:Anti-static bag
PWM mode (display has ‘%’ for PWM mode)
1. The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays “OUT” mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
If you want to switch to PULSE pulse mode, long-press the SET button (more than 6 seconds), do not release, you will see the screen change, ‘%’ disappears, it is PULSE mode.
2. PULSE pulse mode (No ‘%’ on the right side of the display is displayed in PULSE mode)
The P+ and P- buttons set the positive pulse width time, the LCD screen shows up, the N+ and N- buttons set the negative pulse width time, the LCD screen displays downwards, the unit is seconds; short press the STOP button to control the signal output or stop, stop output It is 0, the screen displays “OUT” mark as output, otherwise it stops output; the default factory positive pulse width is 0.5 second, and the negative pulse width is 0.5 second.
Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. Output pulse; P+ and P- buttons set delay time, N+ and N- buttons set pulse number, factory default delay time is 0 seconds, pulse number is infinite (display —-); Press the button for 2 seconds, automatically return to the pulse interface, press the STOP button, after the delay setting time, start to send the set number of pulses, if the number of pulses is sent, it will automatically output 0, if the period is not sent, press the STOP button. The output pulse will be turned off and cleared, and the number of pulses set will be issued each time it is started.
Application Operation Examples
1. PWM output 20KHZ, 60% duty cycle:Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%.
2. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop:select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -.
3. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop:select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-.
4. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100:select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100.
5. Power-on delay for 10 seconds, then permanently output signal:select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-).
6. Other applications can explore or consult customer service
All setup parameters are not lost when they are turned off.
Package includes
10 x PWM signal generator
Weight | 0.19 kg |
---|
Customers Also Viewed
MSI.SDR Panadapter Kit Broadband Software Radio MSI.SDR Receiver 10KHz-2GHz Panadapter Module Compatible with SDRPlay RSP1 Software
$112.66Electronic Accessories & SuppliesAdd to cartDescriptionMSI.SDR is a powerful broadband full-featured SDR receiver.Covers frequencies from 10KHz to 2GHz. Just connect a PC and an antenna. The function of the receiver can be provided.Compatible with all SDRPlay RSP1 software. Compatible with popular SDR software platforms You can monitor up to 10 MHz of spectrum simultaneously. Enjoy all modes of operation. Small …
5pcs JDY-18 bluetooth Module 4.2 High Speed Transmission BLE Mesh Networking Master
$30.17Other Module BoardAdd to cartProduct introductionThe JDY -18 transmission module is based on the bluetooth 4.2 protocol standard, the working band is 2.4GHZ, the debugging mode is GFSK, the maximum transmission power is 0dB, the maximum launch distance is 60 meters. The imported original chip is designed to support the user to modify the equipment name, service UUID, transmit …
5pcs JDY-18 bluetooth Module 4.2 High Speed Transmission BLE Mesh Networking MasterRead More
4 Coil Brushless Motor Fan Blade High-speed Turbine Hall Electric Machine Model
$168.87PhysicsAdd to cartDescriptionFour Coil Brushless Fan Blade High-speed Turbine Hall Electric Machine Stirling Engine Model SpecificationName:Four Coil Brushless Motor Fan ModelCoil:Four Coil DesignPrinciple Design:Electromagnetic Induction, Mechanics, Hall Sensor.Size:155*125*150mmPower:8WWorking Voltage:12VSpeed:3000r/minAdapter Input Voltage:AC100-240V 50/60HzAdapter Output Volatage:DC12V 3AType:General motor:Hall electric motorDegree of loss:carbon brush,easily consumable:brushless,durableStructure:complex:simple easy maintenanceQuality:low:highTechnology integration:low:highWorking Life:short:longTheory1.Hall effect is a semiconductor sensor, under the action of loren magnetic …
4 Coil Brushless Motor Fan Blade High-speed Turbine Hall Electric Machine ModelRead More
TA8131 Digital Luxmeter illuminance Light Meter 100000Lux Lux/FC illuminometer
$52.64Laboratory Thermostatic DevicesAdd to cartDescription* 3-1/2 digit LCD display, Max reading 1999.* Hand or Auto measuring range:0~100,000Lux.* LUX/FC Unit selection.* MAX and MIN Reading Hold Function.* Storage 50 datas and delay logging function(1 to 60 seconds selection).SpecificationsItem:Digital Lux meterModel:TA8131Brand:TASIMeasuring Range:100Lux, 1000Lux, 10000Lux, 100000Lux. (10/100/1000/10000 Fc)Resolution:0.1LuxAccuracy:±3% rdg ± 10dgts( ±4% rdg ± 10dgts(>10,000 lux)Total accuracy:for C.I.E standard illuminate A(2856K)Sample Rate:2times/SRepeatability:±2%Range …
TA8131 Digital Luxmeter illuminance Light Meter 100000Lux Lux/FC illuminometerRead More
Aluminum Alloy 100W 28KHz Ultrasonic Piezoelectric Transducer Cleaner Silvery
$51.62Electronic Accessories & SuppliesAdd to cartFeatures1. Low heat2. Good thermal stability3. Frequency and static capacitance consistency strong.4. Resonance impedance is low.5. The average length of life.6. It can be widely used in a variety of ultrasonic cleaning equipment.7. High performance:mechanical Q value, high vibration efficiency, high amplitude8. The full range (17KHZ-200KHZ), to meet the different needsParameterMaterial:Aluminum AlloyPower:100WResonant frequency:28 ± 0.5 …
Aluminum Alloy 100W 28KHz Ultrasonic Piezoelectric Transducer Cleaner SilveryRead More
10Pcs Mini DC-DC1.3A Voltage Converter Step Down Module 12V 24V to 5V 3.3V 9V with integrated inductor for 360 RC
$17.74Boost & Buck ModuleAdd to cartFeaturesThe maximum output current is 1.3A, and it is running within 1A for a long time;Non-isolated DC synchronous rectification with up to 94% conversion efficiencyOne-piece inductor, lower heat than ordinary shielded inductorUniversal, optional output voltage, spot welding directly on the boardOutput with LED indicator for easy and visual indication of voltage outputWith enable (EN) port, …
Reviews
There are no reviews yet.