10pcs Dual 2 Mode PWM Square Rectangular Signal Generator Control DC Stepper Motor Driver Board Adjustable Pulse Module
$75.25
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. PWM signal generator, square rectangular signal generator
2. Used to generate square rectangular signals for controlling DC motor or stepper motor driver; used for servo motor, stepping motor, electric gripper, replacing PLC pulse, etc.
3. The supporting driver realizes dimming, speed regulation, control of solenoid , etc., but can not directly drive the load of the electric motor solenoid .
Product Highlights
1. Two modes can be selected
PWM mode – frequency (continuous), duty cycle, pulse number adjustable;
PULSE pulse mode – positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable.
2. With start and stop button, can control the output and stop of the signal
3. Wide voltage input 3.3-30V, with anti-reverse protection, 5.08mm terminal wiring
Technical parameters
1. Working voltage:3.3~30V, with anti-reverse protection
2. Frequency:1Hz~150KHz, accuracy about 2%
3. Duty cycle:0-100%, 1% stepping
4. Number of pulses:1-9999, or infinite (display ‘—-‘ stands for infinity)
5. Delay output time:0.000s-9999s, the can be set 1ms
6. Positive and negative pulse width length:0.000s-9999s, the can be set 1ms
7. Signal loading capacity:less than 30mA
8. Output signal amplitude:amplitude is equal to the supply voltage
9. Product size:60 x 32 x 10mm
10. Product Weight:18g
11. Packing:Anti-static bag
PWM mode (display has ‘%’ for PWM mode)
1. The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays “OUT” mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
If you want to switch to PULSE pulse mode, long-press the SET button (more than 6 seconds), do not release, you will see the screen change, ‘%’ disappears, it is PULSE mode.
2. PULSE pulse mode (No ‘%’ on the right side of the display is displayed in PULSE mode)
The P+ and P- buttons set the positive pulse width time, the LCD screen shows up, the N+ and N- buttons set the negative pulse width time, the LCD screen displays downwards, the unit is seconds; short press the STOP button to control the signal output or stop, stop output It is 0, the screen displays “OUT” mark as output, otherwise it stops output; the default factory positive pulse width is 0.5 second, and the negative pulse width is 0.5 second.
Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. Output pulse; P+ and P- buttons set delay time, N+ and N- buttons set pulse number, factory default delay time is 0 seconds, pulse number is infinite (display —-); Press the button for 2 seconds, automatically return to the pulse interface, press the STOP button, after the delay setting time, start to send the set number of pulses, if the number of pulses is sent, it will automatically output 0, if the period is not sent, press the STOP button. The output pulse will be turned off and cleared, and the number of pulses set will be issued each time it is started.
Application Operation Examples
1. PWM output 20KHZ, 60% duty cycle:Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%.
2. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop:select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -.
3. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop:select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-.
4. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100:select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100.
5. Power-on delay for 10 seconds, then permanently output signal:select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-).
6. Other applications can explore or consult customer service
All setup parameters are not lost when they are turned off.
Package includes
10 x PWM signal generator
Weight | 0.19 kg |
---|
Customers Also Viewed
30pcs EQKIT Electronic Funny Kits Voice Control LED Melody Light DIY Kits Production Suite Small Electronic Learning Electronic Kits
$56.32DIY Electronic KitsAdd to cartDescriptionVoltage:3-4 .5 VPCB material:FR-4 fiberglass boardDimensions:34 * 34MMPackage included30 x Voice Control LED Melody Light DIY Kits
10pcs Transparent Protective ABS Case Support Cooling Fan for Raspberry Pi 4 Model B
$58.27Raspberry Pi & Orange PiAdd to cartOverviewThis is a new design ABS case to protect your Raspberry Pi 4 Model B computer, and it is only comepatible with your Raspberry Pi 4 Model B, not support other versions. Also support install a dc 5v cooling fan. The GPIO pin interface is available to us if you do not install the cooling …
10pcs Transparent Protective ABS Case Support Cooling Fan for Raspberry Pi 4 Model BRead More
10pcs Roller Lever Arm Micro Switch AC 250V HV-156-1C25
$13.11Electronic Accessories & SuppliesAdd to cart10pcs Roller Lever Arm Micro Switch AC 250V HV-156-1C25DescriptionSize:27.8 x 10.3 x 15.9mmRoller Diameter:4.75mmLever Length:28mmRating:15A AC250VWithstand Voltage:AC1, 0000V 1 MinuteInsulation Resistance:100mΩ DC500VContact ResistanceSoldering Temperature:250°C Max 3 sec.Ambient Temperature used:-25°C to +80°CAmbient Humidity UsedOperating Force:160Part number is HV-156-1C25Package included10 x Micro Switch
Solar TPMS LED Wireless Tire Pressure Monitoring System with 4 internal Sensor
$168.06SwitchesAdd to cartFeatures-This wireless tire pressure monitoring system comes with four built-in sensors and a digital monitor to monitor the tire pressure/temperature-By employing the advanced wireless sensors which highly integrated pressure and temperature sensor, we provide the amazing and reliable TPMS for you-Oil will be decreased when tires work under lower pressure, this item can reduce fuel …
Solar TPMS LED Wireless Tire Pressure Monitoring System with 4 internal SensorRead More
Deek-Robot W-1213 intelligent Digital Display Fish Tank Climbing Pet Greenhouse Planting Hatching and Breeding Temperature Controller
$26.23Test & Measuring ModuleAdd to cartProduct parameterProduct name:Intelligent temperature controllerProduct model:W-1213Power supply voltage:AC110-220VWorking frequency:50HZTemperature range:-40C~+120CTemperature measurement accuracy:÷0.5CSensor cable length:100CMSize:79.5*43*35mmShell material:surface shell ABS, bottom shell flame retardant ABSBattery:CR1220 3V button battery(not included)Display panel descriptionHeat (corresponding icon display):heating mode, in heating mode, heating the relay works.Cool (corresponding icon display):Cooling mode, in cooling mode, cooling the relay works.Timer:Timer switch, in timer mode, the …
Waveshare IMX219-160 Camera 160 Degree Field of View 8 Million Pixels for Jetson Nano
$54.66Smart ModuleAdd to cartFeaturesSupports NVIDIA Jetson Nano Developer Kit, Compute Module 3/3+8 MegapixelsSensor:IMX219Resolution:3280 ≠ 2464Lens specificationsCMOS size:1/4inchAperture (F):2.35Focal Length:3.15mmAngle of View (diagonal):160 degreeDistortion4 screw holesUsed for attachmentProvides 3.3V power outputDimension:25mm ≠ 24mmApplicationsCombined with the Jetson Nano AI computer, this camera suits for AI projects such asFace recognitionRoad mark detectionLicense plate recognitionPackage includes:(the Jetson Nano does not includes)1 x …
Waveshare IMX219-160 Camera 160 Degree Field of View 8 Million Pixels for Jetson NanoRead More
10Pairs MC4 Connector Male And Female MC4 Solar Panel Connector 30A 1000V for PV Cable 2.5/4/6mm Solar Panel Connect
$26.23Electronic Accessories & SuppliesAdd to cartSpecificationArticle number:MC4Rated voltage 1000 VRated impulse voltage:1000 VTest voltage:6 kV (50Hz)Suitable for cables:10, 12, 14 AWG (2.5mm2 / 4mm2 / 6mm 2;)Rated current:24 A-14 AWG (2.5mm 2;), 30A-12 and 10 AWG (4mm 2; and 6mm 2;)Protection class:IP67Contact material:copper, silver platedInsulation material:PC / PAOperating temperature:-40 ° C + 90 ° CThe security class:IIFlame Class:UL94-V0Contact resistance:≤5mΩInsertion / …
Reviews
There are no reviews yet.