5pcs ESP-12F AC/DC Power Supply ESP8266 AC90-250V/DC7-12V/USB5V WIFI Single Relay Module Development Board
$70.21
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. On-board mature and stable -12F WIFI module, large capacity 4M Byte Flash
2. The I / O port and UART program download port of the WiFi module are all exported, which is convenient for secondary development.
3. On-board AC-DC switching power supply module, power supply mode supports AC90-250V / DC7-12V / USB5V
4. On-board WIFI module RST reset button
5. -12F supports the use of development tools such as Eclipse / for Arduino IDE, and provides reference programs under the for Arduino development environment.
6. One 5V relay on board, output switching signal, suitable for controlling load with working voltage within AC250V / DC30V
7. Onboard power indicator, 1 programmable LED and relay indicator
Function
1. L, N:AC90-250V power supply
2. AC90-250V to DC5V switching power supply (Do not touch here directly with your hand when using AC power supply !!!)
3. VCC, GND:DC7-12V power supply;
4. USB:DC5V USB power supply;
Note:AC90-250V, DC7-12V, DC5VUSB can be selected as one of the three power supply methods.
5. 6X6mm button:8266 reset button;
6. UART program download port:GND, RX, TX, 5V of 8266 are connected to GND, TX, RX, 5V of the external TTL serial module rectively. IO0 must be connected to GND when downloading, and then disconnected connection;
7. GPIO pin out port;
8. Relay output
Normally closed end, the relay is short-circuited to COM before pull-in, and suspended after pull-in;
COM:public end;
NO:Normally open, the relay is suspended before the pull-in, and shorted to COM after the pull-in.
9. Power indication LED;
10. Programmable LED;
11. Relay Indication LED:Lights up during pull-in.
Introduction to GPIO terminal
Number:Name:Function:Number:Name:Function
1:GND:Power ground:13:IO10:GPIO10
2:Relay:The relay drive port is driven by IO5 by default. If you want to use other I / O to drive the relay, you can remove R14, and then connect the I / 0 of the drive relay to this Relay pin:14:MISO:Slave output input
3:IO2:GPIO2; UART1_TXD:15:IO13:GPIO13; HSPI_MOSI; UART0_CTS
4:IO4:GPIO4:16:IO14:GPI014; HSPI_CLK
5:RX:UART0_RXD; GPIO3:17:ADC:A / D conversion result. Input voltage 0 ~ 1V, value:0 ~ 1024
6:3V3:3.3V power supply:18:3V3:3.3V power supply
7:SCLK:clock:19:MOSI:output Slave input
8:IO15:GPIO15; MTD0; HSPICS; UART0_RTS:20:IO9:GPIO9
9:IO0:GPIO0:21:CS0:Chip Select
10:IO5:GPIO5:22:IO12:GPIO12; HSPI_MIS0
11:TX:UARTO_TXD; GPIO1:23:IO16:GPIO 16
12:5V:5V power supply:24:GND:Power ground
Package includes
5 x Development Board
Weight | 0.2 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.