5pcs ESP-12F AC/DC Power Supply ESP8266 AC90-250V/DC7-12V/USB5V WIFI Single Relay Module Development Board
$70.21
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. On-board mature and stable -12F WIFI module, large capacity 4M Byte Flash
2. The I / O port and UART program download port of the WiFi module are all exported, which is convenient for secondary development.
3. On-board AC-DC switching power supply module, power supply mode supports AC90-250V / DC7-12V / USB5V
4. On-board WIFI module RST reset button
5. -12F supports the use of development tools such as Eclipse / for Arduino IDE, and provides reference programs under the for Arduino development environment.
6. One 5V relay on board, output switching signal, suitable for controlling load with working voltage within AC250V / DC30V
7. Onboard power indicator, 1 programmable LED and relay indicator
Function
1. L, N:AC90-250V power supply
2. AC90-250V to DC5V switching power supply (Do not touch here directly with your hand when using AC power supply !!!)
3. VCC, GND:DC7-12V power supply;
4. USB:DC5V USB power supply;
Note:AC90-250V, DC7-12V, DC5VUSB can be selected as one of the three power supply methods.
5. 6X6mm button:8266 reset button;
6. UART program download port:GND, RX, TX, 5V of 8266 are connected to GND, TX, RX, 5V of the external TTL serial module rectively. IO0 must be connected to GND when downloading, and then disconnected connection;
7. GPIO pin out port;
8. Relay output
Normally closed end, the relay is short-circuited to COM before pull-in, and suspended after pull-in;
COM:public end;
NO:Normally open, the relay is suspended before the pull-in, and shorted to COM after the pull-in.
9. Power indication LED;
10. Programmable LED;
11. Relay Indication LED:Lights up during pull-in.
Introduction to GPIO terminal
Number:Name:Function:Number:Name:Function
1:GND:Power ground:13:IO10:GPIO10
2:Relay:The relay drive port is driven by IO5 by default. If you want to use other I / O to drive the relay, you can remove R14, and then connect the I / 0 of the drive relay to this Relay pin:14:MISO:Slave output input
3:IO2:GPIO2; UART1_TXD:15:IO13:GPIO13; HSPI_MOSI; UART0_CTS
4:IO4:GPIO4:16:IO14:GPI014; HSPI_CLK
5:RX:UART0_RXD; GPIO3:17:ADC:A / D conversion result. Input voltage 0 ~ 1V, value:0 ~ 1024
6:3V3:3.3V power supply:18:3V3:3.3V power supply
7:SCLK:clock:19:MOSI:output Slave input
8:IO15:GPIO15; MTD0; HSPICS; UART0_RTS:20:IO9:GPIO9
9:IO0:GPIO0:21:CS0:Chip Select
10:IO5:GPIO5:22:IO12:GPIO12; HSPI_MIS0
11:TX:UARTO_TXD; GPIO1:23:IO16:GPIO 16
12:5V:5V power supply:24:GND:Power ground
Package includes
5 x Development Board
Weight | 0.2 kg |
---|
Customers Also Viewed
3 Axis GRBL USB Driver offline Controller Control Module LCD Screen w/ Controller Board SD Card for CNC 1610 2418 3018 Wood Router Laser Engraving Machine
$93.14Control BoardAdd to cartDescriptionThis offline controller w/ controller board is designed for the use of Mini CNC router 1610/2418/3018 and even with more advanced function of tool set, limit switch supportive, Laser supportive; Offline and Bluetooth supportive.SpecificationUSB Cable Length:20cmFirmware:GRBL 08, 09, 1.1 and so on Input Voltage:DC 7V- 36VApplicable CNC Router:3 Axis CNC router 1610; 2418; 3018Features1. Support …
20Pcs PS2 Game Joystick Switch Sensor Module
$34.87Other Module BoardAdd to cart20Pcs PS2 Game Joystick Module For Description This is PS2 game joystick module for Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. …
Ebyte E07-M1101D-TH 10dBm Spring Antenna 433MHz CC1101 Wireless Transceiver SPI 433mhz RF Module
$9.18Smart ModuleAdd to cartSpecificationsInterface:SPIPower:10dBmDistance:520mSupply voltage:1.9 ~ 3.6V DCFrequency:433MHz(387 ~ 464MHz)RF Parameter:Value:RemarkWorking frequency:387~464 MHz:Default:433MHz (26MHz oscillator)Transmitting power:10 dBm:Max. Power (10mW)Receiving sensitivity:-108 dBm:Air data rate:0.6kbpsAir data rate:0.6k~500kbps:Default:0.6kbpsTest distance:600m:In open and clear air, with maximum power, 5dBi antenna gain, height of 2m, air data rate:0.6kbpsHardware Parameter:Value:RemarkSize15 * 30 mm Without Spring antennaAntenna typeSpring antenna Communication interfaceSPI PackageDIP Electronic parameter:Min.:Typ.:Max.:Unit:ConditionPower supply:1.8:3.3:3.6:VCommunication level:1.8:3.3:3.6:VTransmitting …
Waveshare IS62WV51216BLL SRAM RAM Module Storage Memory Board
$28.42Expansion Board & ShieldAdd to cartFeatureFunction:SRAM IS62WV51216BLL (8M Bit), can be directly connected to the corresponding FSMC interface of the Open series development board, and the external expansion interface supports external expansion of SRAM, LAN, USB HOST, etc.Typical application:SRAM external expansion storageMain resources:IS62WV51216BLL (8M Bit), control interfacePackage includes1 x IS62WV51216BLL SRAM Board
3 Megapixel Optical Zoom Cam Module Fixed Focus 3MP OV3660 Camera Module FOV 79
$15.30Other Module BoardAdd to cart>>>Manual:Click here to openSpecificationsModel No.:HBVCAM-3M1917Model Size:30mm ≠ 25mm ≠ 5.0mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:FixedObject distance:30CM-infinityResolution:800LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:600WOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:OV3660 (1/5” )Seneor Package:CSP,Bare DieMaximum resolution:2048*1536Sensitivity:670mV /(lux-sec)Pixel Size:1.4┢m x 1.4┢m Maximum Image Transfer …
3 Megapixel Optical Zoom Cam Module Fixed Focus 3MP OV3660 Camera Module FOV 79Read More
Hall Effect Magnetic Sensor Module DC 5V
$4.36Sensor & Detector ModuleAdd to cartDescription This is Hall Effect magnetic sensor module DC 5V for Brand:KEYES Model:KY-003 Magnetic, speed, gap induction Suitable for DIY project Working voltage:DC 5V Material:PCB Feature Small size and high sensitivity. response temperature and good performance. Precision and high reliability 3144 Series Hall principle of Hall effect switch IC, using technology to produce magnetic semiconductor …
Geekcreit Portable Mini Automatic Spot Welding Machine Control Board 12V/5.6V Portable Lithium Battery Spot Welding Circuit Board Accessories
$40.49Driver ModuleAdd to cartInstructions for use of automatic spot welding control board1. Power requirements:In 12V mode, voltage input is 7-15V (12V recommended), in 5.6V capacitor mode, voltage supports 3.7-6V (recommended 5.6V), current requirements:can output actual current 120-360A2. Button function:switch between 1 power level-2 power level-3 power level-4 power level after long press for 3 seconds3. The red light …
Reviews
There are no reviews yet.