3pcs 2.8 inch TFT LCD Shield Touch Screen Module with Touch Pen for UNO R3/Nano/Mega2560 OPEN-SMART for Arduino – products that work with official for Arduino boards
$45.51
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Description
This is a 2.8 inch TFT LCD expansion board. This display has a controller built into it with RAM buffer so that almost all work is done by the TFT.
It leads out the pins of the TFT and pins is 2.54mm, so the secondary development is easy.
With the GPRS module, you can design your phone.
With the NFC reader module, you can create access control systems with the photos show.
With voltage and current sensors, you can make an oscilloscope.
Feature
– Can use it directly to display characters, graphics and BMP format images with the help of card adapter module.
– Compatibility:Because the logic level is 3.3V, it is compatible with 3.3V for Arduino board, you generally need to add a level conversion circuit if you use a 5V for Arduino Board (for Arduino UNO R3 / for Arduino Mega2560 / for Arduino Leonardo).
– Touch screen type:resistive touchscreen.
– Touch Pen:length is 9cm;
– Resolution:320 * 240, 16-bit (262,000) color
– Display size:2.8 inch;
– Operating voltage:3.3V;
– Logic level:3.3V;
– Operating current:the maximum is 60mA
– Bus interface:8080-parallel interface (8 bit)
– IO Port Package:PAD is available, and the pin is 2.54mm.
– LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight.
– Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor
Package includes
3 x LCD
3 x Pen
Weight | 0.162 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.