Robotdyn MEGA 2560 ETH R3 ATmega2560+W5500 Micro-SD Card Reader Micro-USB USB-UART CP2104 ESP-01 Socket Development Board
$109.80
Out of stock
Type No PoE / Type Active PoE / Type Passive PoE /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Product Overview
If you’re looking to build a network-connected device, RobotDyn MEGA 2560 ETH R3 with LAN and additional Wi-Fi connection, is the best solution to use ArduinoMega 2560 R3 and Ethernet controller W5500 and with Wi-Fi module ESP-01!
This is a fully-featured Ethernet-connected device via LAN or Wi-Fi. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in the local network and internet, and respond or react accordingly. In a net member role, the RobotDyn MEGA 2560 ETH R3 can collect data from different devices or industrial equipment and send it through the local network or the Internet. It can also receive data from the local network and internet, and control connected devices and equipment. The RobotDyn MEGA 2560 ETH R3 can also act as a stand-alone unit, providing autonomous reactions based on the defined algorithm in response to network changes or other triggers.
MEGA 2560 ETH R3 features 5 devices on one board
Mega 2560 based on an ATmega2560 with 70 I/O.
Ethernet controller based on WizNet W5500 TCP/IP.
Optional PoE function (receiving power directly through the Ethernet cable). Can select passive PoE or active (intellect) PoE.
Micro SD card module.
Additional Wi-Fi module ESP-01, based on ESP8266 microcontroller.
Ports and buses
RobotDyn MEGA 2560 ETH R3 has 70 input/output ports, 12 of which can be used for PWM, and 16 analog ports with 10-bits resolution (0 – 1023). The board is equipped with an RJ45, micro USB, DC power jack, and a reset button.
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded LAN Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, osMAC and PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega2560. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
ESP-01 Wi-Fi
Onboard has a socket for connecting the Wi-Fi ESP-01 module. Wi-Fi module connecting to the Serial3 interface via RX3(D15)/TX3(D14) I/O.
In Arduinocode, for control, a Wi-Fi module needs to use Serial3 port.
Micro-SD card rider
The board also features the Micro SD card socket. The micro SD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega2560 is dedicated to working with the micro SD. For card detect used D9, but you can cut off soldering pads for disconnect this function.
** Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus.
Programming in ArduinoIDE
RobotDyn MEGA 2560 ETH R3 can be programmed via an ArduinoIDE. Select ArduinoMega 2560 in the Boards menu, and use Ethernet3 / Ethernet4 library.
Power supply
RobotDyn MEGA 2560 ETH R3 can be powered via
USB port (5V, 500mA)
DC-IN jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) ― requires PoE-enabled switch or a PoE injector.
Note:PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It checks the power input, and if it doesn’t meet the device’s requirements, it won’t power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with relevant PoE module.
MEGA 2560 ETH R3 with ATmega2560 & W5500
Input Voltage (VIN/DC jack):7~12V
Power IN (USB):5V-limit 500mA
PoE Type:No PoE/Active PoE/Passive PoE
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:54
PWM Output:12
Analog I/O:16
Reserved Pins:D4 is used for SD card select;
D10 is used for W5500 CS;
*Optional:D8 is used for W5500 interrupting, D7 is used for W5500 initialization, D9 is used for SD card detect
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.35mm-101.61mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:63g
Mega MCU
Microcontroller:ATmega2560(AVR 8-bit)
Operating Voltage:5V
Memory Size:256KB
SRAM:8KB
EEPROM:4KB
Clock Speed:16MHz
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half duplex
Operating Voltage:3.3V
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
ArduinoLib Ethernet3:Click here to open
Tutorial:Click here to open
Package includes
1 x Development Board
Weight | 0.07 kg |
---|
Customers Also Viewed
WEAH-307 3 Way Audio Speaker Crossover 100W Filter Treble Mediant Bass Frequency Divider Module
$15.30Amplifier BoardAdd to cartFeatureMode:WEAH-307Power:100WImpedance:4-8ohmCompatible for:Under 6inches HornTreble Standard:12db/octBass Standard:12db/octSize:8.5×6.2×2.6cmFrequency response:low 45Hz, high 20KHzPackage includes1 x 100W Filter Treble Mediant Bass Frequency Divider
3pcs WXD3-13-2W Precision Potentiometer 22K 22K Ohm Wirewound Multi-Turn Potentiometer
$10.49Module ComponentsAdd to cartSpecificationsResistance range:22K┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included3 x Potentiometer
20Pcs Serial Port WIFI ESP8266 Module Adapter Plate with IO Lead Out for ESP-07 ESP-08 ESP-12
$12.02Smart ModuleAdd to cart20Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.NoteNeed to solder 3V regulator by youself.ESP-07, ESP-08, ESP-12 module board are not included!!!Package included20 x Serial Port WIFI ESP8266 Module Adapter Plate40 x Pins
10pcs 2S 5A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board BMS for Li-ion Lipo Battery
$16.88Battery Protection ModuleAdd to cartSpecificationsModel:HX-2S-A2 Overcharge voltage range:4.25-4.35v ± 0.05vSize:17.5 * 17.5 * 3.2mm over discharge voltage range:2.5-3.0v ± 0.05vUpper limit operating current:5A Operating temperature:-40 — +50 °Upper limit instantaneous current:7A Storage conditions:-40– +80 °Quiescent current:less than 10uA Effective life:more than 50,000 hoursInternal resistance:less than 300mΩ Short circuit protection:can be protected, need to charge recoveryCharging voltage:8.4V-9VWelding point DescriptionB + …
DC 24V 600L/H Submersible Pump Immersible Pump Under Water Pump Bath Pump
$42.51Electrical Pump & ValveAdd to cartSubmersible Pump Immersible Pump Under Water Aquarium Bath Pump DC 24V 600L/HSpecificationColor:GreyUse:SubmersibleMaterial:Engineering ABSRated Voltage:DC 24VStarting Voltage:6VCurrent:0.75AFlow:600L/HNoise:50dB MAXMax. Head:500cmPower:18wWaterproof grade:IP68Motor:brush motorWater temperature:-20 ° C ~ 60 ° ° CAmbient humidity:45%~90%No load current:less than 0.2ACurrent at load:1.2ACable:1.5m /59.06inch(appr.)Total Length:105.9mm /4.31inch(appr.)FeaturesBrand New and high quality.Suitable for tap water, sea water, ground waterCannot be used directly with 220V AC …
DC 24V 600L/H Submersible Pump Immersible Pump Under Water Pump Bath PumpRead More
TDA7498 2.1 Digital Power Amplifier Board 200W+100W+100W Supasses TPA3116 Class D DC24V
$70.06Amplifier BoardAdd to cartFeatures-Using original TDA7498 TL072-The front input capacitor and the inter-stage coupling capacitor use Siemens’ top-level capacitors 1UF, the electrolytic capacitor signal main circuit uses Taiwanese famous brands, and the main filter capacitor uses special electrolytic capacitors 2≠2200UF to ensure strong continuous power support.-The resistors are high-precision chip resistors, and the main circuit uses five-ring metal …
TDA7498 2.1 Digital Power Amplifier Board 200W+100W+100W Supasses TPA3116 Class D DC24VRead More
3Pcs RobotDyn RTC DS1307 Real Time Clock Battery Shield with Pin Headers Set
$18.67Expansion Board & ShieldAdd to cartPINOUT:http://img.staticbg.com/file/products/20171226001032PINOUT-RTCDS1307.pdfSchematic:http://img.staticbg.com/file/products/20171226001140Schematic-RTCDS1307.pdfFeatureType:Logic ICsPackage includes3 x RTC DS1307 (real time clock) + battery3 x Wemos D1 mini shield6 x Male Pin Header 8pins6 x Female Pin Header -BLACK 8pins6 x Stackable Header – BLACK 8pins
Reviews
There are no reviews yet.