4S 14.8V 8A Li-ion Lithium Single 18650 Battery PCB Protection Board with Balance Function
$15.30
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Parameters
Charging voltage:DC 18V CC/CV
Standby current for single cell:≤8 uA
Maximum continous output curent:8 A
Over charge voltage test:4.35V±0.025V
Time delay on over charge protection:0.5 S~1.5 S
Resume(over charge):0~0.2V
Over discharge voltage test:2.7V±0.080V
Time delay on over discharge protection:50~150 mS
Resume(over discharge):0.2~0.7V
Over current,voltage test:200±25mV
Over current,current test:28A±1A
Time delay on over current:5 mS~15 mS
Resume after over current:Self recovery
Short circuit Protection:External
Time delay on short circuit:200~500 uS
Respond time for short circuit:Self recovery
Internal resistance of protection circuit(MOSPET):≤8mΩ
Operating temperature:-40 ~+50→
Storage temperature:-40 ~+125→
Size(L*W*H):50 x 21 x 2.8 mm
Features
1.3 period of over-current detection.
2.Wide working temperature range and low current consumption.
3.For each section of the battery voltage detection with high precision.
4.Through the MOS tube can control the battery charging and discharging.
5.This Lithium ion battery protection PCB protect single Lithium ion batteries. 8A continous current.
6.Lithium ion protection is necessary, as Lithium ion will explode when they are shorted circuit or overcharged, and damaged when they are over discharged.
Connection
B+ —— TO +ve of the 1st battery
B1 —— TO -ve of the 1st battery and +ve of the 2nd battery
B2 —— TO -ve of the 2nd battery and +ve of the 3rd battery
B3 —— TO -ve of the 3rd battery and +ve of the 4th battery
B- —— TO -ve of the 4th battery
P+ —— TO +ve of load/input
P- —— TO -ve of load/input
Package included
1 x Protection Board
Weight | 0.004 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.