JC-303 bluetooth 5.0 Receiving DAC Decoder Audio bluetooth Module Audio Decoding Board
$34.22
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Overview
This module is suitable for retrofitting audio equipment such as amplifiers, amplifier boards DY, amplifier preamps and so on.
Transform traditional wired transmission into wireless Bluetooth transmission, the module uses Qualcom 5.0 high-fidelity
The Bluetooth chip and Bluetooth 5.0 high version ensure high data transmission so that the audio data is transmitted losslessly to the analog power amplifier. To achieve wireless HF quality. The module supports 16bit / 48khz non-destructive reception, and the sound quality level reaches CD level. Is a truly lossless Bluetooth receiver module. This module receives Bluetooth, and the pcm5102a decoder core outputs standard single-ended analog audio signals. The audio signal can be directly added to the pre-stage or post-stage analog power amplifier without adding a DAC decoder. In order to facilitate the modification of DY friends, the module has a AUX input for external linear audio. The AUX and Bluetooth are switched by the original NEC high-precision relay. The AUX input is directly switched by the relay without any chip processing. Ensure the lossless output of AUX audio to the amplifier.
Specifications
1. DC power input interface, GND is the negative pole of the power supply, +12 is the positive pole of the power supply. Wide voltage:6-36V
2. AUX audio interface, LINE_INR right channel input, GND common ground line LINE_INL left channel input
3. Audio output interface, ROUT right channel output, GND common ground line OUT left channel output
4. Audio switching relay, imported from NEC, guarantees sound quality transmission and working life.
5. Bluetooth antenna buckle interface, used to install an external 2.4g antenna to enhance Bluetooth signal reception, open and unobstructed
6. Up to 20 meters or more, add an external antenna to support through-wall reception. If the module is installed in a metal chassis,
7. Install an external antenna (a 2.4G antenna like a router) to ensure complete signal reception. Outside plastic
8. No external antenna is needed on the side of the case or wooden case.
9. Bluetooth working indicator 1
10. Bluetooth working indicator
Tips
If after the modification, the Bluetooth amplifier has a slight noise or interference noise when working, add a low-power power supply above 6-36V50MA and separate the Bluetooth module to solve the noise problem. Shared power with equipment is prone to common ground interference and noise floor
Package Included
1 x bluetooth 5.0 Receiving DAC Decoder
What does the AUX input with relay do
Answer:This is to help solve the problem of adding a Bluetooth receiver board to an amplifier or active speaker with only one audio input.
For example, a computer active speaker has only one input function, and you cannot plug in an external sound source such as a computer sound card or a CD player when connected to a Bluetooth receiver board. The audio input needs to be unplugged, which is very inconvenient to use. If you have an AUX input, you can use the Bluetooth AUX interface to connect computer sound cards or CD players and other external sound sources. The Bluetooth receiver board output interface is connected to the active speaker input terminal, so you do n’t need to unplug the cable. AUX mode. After the Bluetooth connection, it will automatically switch the Bluetooth output, disconnecting the Bluetooth automatically switches to the AUX interface, and the power is also the AUX direct connection function.
Weight | 0.029 kg |
---|
Customers Also Viewed
10pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$19.40Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
SZWENGAO WG8-40S1210 8-40V to 12V 10A Automatic Buck Boost Power Converter Car Voltage Regulator Step Down Step Up Module
$39.35Boost & Buck ModuleAdd to cartFeatures*Designed according to CE/RoHS*100% full power, high stability output*100% full load aging test*Imported components*Imported high-quality thermal silica gel potting, waterproof, dustproof and shockproof* Die-cast aluminum alloy shell, small size, simple installation*Internal protection functions such as over current, low voltage, over temperature, short circuit, reverse connection, etc.*Wide voltage input, high conversion efficiency of 88-90%*Long service life …
10Pcs Wemos DS18B20 Module for D1 Mini DS18B20 Temperature Measurement Sensor Module
$36.17Sensor & Detector ModuleAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included10 x DS18B20 Module20 x Long female pin20 x Short female pin20 x Normal pin
ASK Wireless Receiving Module with Decoding EV1527 Encoding Transmitter
$10.92Smart ModuleAdd to cartFeaturesThe latest anti-lost code self-recovery function solves the trouble of losing code.The latest anti-interference software is involved to prevent accidental startWidely compatible, PT2262, PT2260, EV1527, PT2240, etc.Ultra-wide pulse width range:105 to 515 oscillating resistorsIn jog mode:support combination codeSelf-locking mode:support combination codeIn the interlock mode:4 independent open and close, the combination code is closedYou can learn …
ASK Wireless Receiving Module with Decoding EV1527 Encoding TransmitterRead More
50W 18V Monocrystaline Al-Alloy at back Solar Panel Dual 12V/5V DC USB Charger for Car RV Boat
$88.07Smart Robot & Solar PanelAdd to cartFeatures– EVA+PET at front panel and Al-Alloy at back, light-weight but durable.– USB and DC output interface for more purpose.– Equipped with 12V DC5.5×2.1 & 5V USB output interface.– Dedicated for 12V battery and 5V device charging. – High output 3000mAh USB, can full-charge an iX in 1.5h in max power.– Mono-crystalline solar Cell with …
Reviews
There are no reviews yet.