12CH Channel DC12V/24V/AC220V Electric Wireless Remote Control Switch industrial Personal Computer
$110.48
frequency 433 MHz Voltage AC220V / frequency 315MHz Voltage 24V / frequency 315MHz Voltage AC220V / frequency 433 MHz Voltage 12V / frequency 433 MHz Voltage 24V / frequency 315MHz Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Overview
The wireless receiver controller has the characteristics of high confidentiality, large storage capacity, stable performance and low power consumption, and is easy to use. It does not need to adopt traditional jumper or dial-code switch encoding. It only needs to receive and store the wireless signals transmitted by the remote control to realize the supporting use. If the learned remote control is lost in the process of use, the information stored in the receiving controller should be cleaned up. The lost remote control will not be able to remote control the receiving controller. In order to regain the right of use, the user must learn again before using it.
It is mainly used in the fields of electric door, window, lifting equipment, gate, elevator, industrial control and security.
Way of working
DC-12L has five working modes:signal self-locking, signal interlocking, signal non-locking, signal self-locking and non-locking coexistence.
1. Signal self-locking — press the remote control number 1 button
2. Signal is not locked — press the remote control number 2 button
3. Signal interlock – press the remote control button 3
4. Signal 1~6 way self-locking and 7~12 way non-locking coexistence – press remote control 4 key
5. Signal 1st self-locking and 2~12 way non-locking coexisting – press remote control 5 key
Output method
1. Signal self-locking:press the remote control button 1
Press the remote control No. 1 button, the relay corresponding to the No. 1 button is pulled in and held, and then press the No. 1 button again, the No. 1 relay is disconnected; Press the No. 2 button of the remote control, the No. 2 button corresponds to the relay is pulled in and hold, and then press No. 2 key again, the 2nd relay is disconnected; the 3~12 key works according to this cycle.
2. Signal is not locked:press the remote control button 2
Press and hold the remote control No. 1 button, and the relay corresponding to the No. 1 button is pulled in. After the hand is released, the relay is disconnected. Press the No. 2 button, and the relay corresponding to the No. 2 button is pulled in, and disconnected after being released; 3~12 button Work as usual.
3. Signal interlock:press the remote control button 3
Press the remote control No. 1 button, the corresponding No. 1 relay is pull in and held, press the No. 2 button, the No. 1 relay is disconnected, and the relay corresponding to the No. 2 button is pulled in and held; the 3~12 button works according to this cycle.
4. Signal 1~6 way self-locking and 7~12 way non-locking coexistence:press remote control button 4
Among the 12 relays corresponding to the remote control, 1 to 6 are self-locking functions, and 7 to 12 are non-locking functions.
5. The signal 1st self-locking and 2~12 way non-locking coexistence:press the remote control button 5
Among the 12 relays corresponding to the remote control, the first one is a self-locking function, and the 2~12 are the non-locking function.
Note:If the learned receiver need to change to other functions, please clear the receiver and select the required button to re-code the code.
Learn method
When the receiver is powered on, press the learning button on the receiver to light up and release, enter the learning state; according to the function you need to select a key to learn by the remote control, the receiver flashes one time (the buzzer sounds once) means that the study is successful.
Clear method
When the receiver is powered on, press and hold the learning button on the receiver for about 8 seconds until the indicator light goes out (the buzzer sounds for about 3 seconds), indicating that the code has been successfully cleared. This receiver can store about 30 different remote control codes.
Technical parameter
Working voltage:DC12V/DC24V/AC220V (Optional)
Quiescent current:≤7mA
Working temperature:-20 ° C – +70 ° C
Receive sensitivity:≥-107dBm
Operating frequency:315MHz to 433MHz
Control voltage:AC, DC optional
Output current:≤5A
Board size:120mmx73mmx18mm
Shell size:125mmx78mmx30mm
Industrial 12-key remote control parameters
Working voltage:DC6V (4 batteries on the 5th, the battery is not included)
Quiescent current:0mA
Working frequency:315MHZ/433MHZ (Optional)
Chip Type:Fixed Code (2264)
Oscillation resistance:Default 475
Launch distance:200-500M (open environment)
Modulation method:ASK amplitude modulation
Size:70 x 158 x 38mm
Package includes
1 x Receiver
1 x Remote control
Weight | 0.1 kg |
---|
Customers Also Viewed
3Pcs NodeMcu Lua WIFI internet Things Development Board Based ESP8266 CP2102 Wireless Module
$33.62Smart ModuleAdd to cartDescriptionMaterial:Experimental Board + Mixed AlloyColor:BlackChip Module:CP2102Working Temperature:-40 → ~ +125 →Power Input:4.5V ~ 9V (10VMAX), USB-poweredDrive Type:Dual high-power H-bridge driverCurrent:continuous transmission ≈70mA (200mA MAX)StandbySize:(L)X(W)4.8X2.5cm/1.89inchX0.98inch(appr.)FeaturesA great set of tools to develop ESP8266.ESP8266 has IO Pin.ESP8266 full IO mouth leads directly download without resetting.Open-source, interactive, programmable, low cost, simple, smart, WI-FI enabled.Greatly speed up your IOT application …
3pcs 500W Thyristor Electronic Regulator Accessaries Dimming Speed Regulation with Switch Temperature Adjustment Knob Module
$13.41Motor PWM Speed ControllerAdd to cartSpecificationsPCB board size:3.2CM*3.3CMRated power:P=UI; 500W=220V*2.27AModel:500W dimming governor;Rated power:500W;Suitable for dimming speed control of AC motors, lamps, etc. above 100W and below 500W;NoteThis module is connected to the AC voltage of 220V, so be sure to pay attention to safety when debugging, to prevent the occurrence of electric shock accidents, the store is not responsible for …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree Protractor
$42.51Laboratory Thermostatic DevicesAdd to cartSpecificationsMaterial:Stainless Steel + PlasticSize Range:0-300mmMeasuring Range:0-360°Resolution:0.05°Accuracy:±0.3°Repeatability:0.05°Battery:1 * 3V CR2032 Lithium Battery (Built-in)Features ACCURATE & Fast:Calculating angles quickly and accurately, digital display clearly TWO SCALE DISPLAY:Both measure the angle and length, metric and imperial scale 360° MEASUREMENT RANGE:Stable locking function can lock the measurement at any angle INTELLIGENT & SAVE POWER:Automatically shut down after 6 minutes …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree ProtractorRead More
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering Kit
$43.73DIY Electronic KitsAdd to cartDescriptionCircuit board size:7.7CMX6.1CM;Shell size:8.4cm*7.6CM*5.5CMWorking voltage:DC 5V (positive inside DC seat)Frequency modulation range:87MHZ-108MHZ;FM button:press the button once to 0.1MHZ, long press the FM button to continuously add and subtract;Weight:265GFunction:digital display frequency function, power off memory function, power saving function;Power-off memory function:After turning off the power, power on again to play the radio station before the power-off.Power …
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering KitRead More
LILYGO TTGO T-Watch Sensor Development Kit STEM Programming Educational Sensor Module Multiple Function Sensor
$216.66Smart ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.More informationhttps://t-watch-document-en.readthedocs.io/en/latest/introduction/index.htmlhttps://github.com/Xinyuan-LilyGO/TTGO_TWatch_LibraryHardware SpecificationsChipset:ESP32, dual-core MCU, PMU power managementFLASH:QSPI flash 16MB / PSRAM 8MBSRAM:520 kB SRAMButton:power key, IO36Extended function:Reference enhanced version and sensor kitUSB to TTL:CP2104Modular interface:UART, SPI, SDIO, I2C, LED PWM, PWM, …
CCM5D DC 6V-30V 6A DC Motor Speed Controller LED Display PWM Variable Speed Regulator with Shell
$17.48Motor PWM Speed ControllerAdd to cartFeatures• CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). • Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.• The display range of 3-digit LED display is “000 Inch-“100 Inch. ( For example, displayed “60 Inch, it means that the PWM output …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle Glassware
$73.55Laboratory BottleAdd to cartDescriptionTransparent Detachable Pipe Bottle for Eliminating Unwanted Odors and HarmSpecificationColor:ClearJoint Diameter:14 mmHeight:355 mm/14inchMaterial:High Borosilicate GlassFeatures1. Convenient to carry.2. Attractive appearance.3. Reusable and easy to clean.4. Help eliminate unwanted odors from your finger tips.5. Made from borosilicate glass for the smoking experience.6. Allow you to enjoy the full flavor of your smoke while reducing the tar …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle GlasswareRead More
Reviews
There are no reviews yet.