formaldehyde Detector Monitor Dart Sensor Module Support WZ-S
$87.71
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Note
1. The sensor is very sensitive and should not be used before strong air convection, such as a fan. Vulnerable to other gases, such as alcohol, perfume, other aldehydes and mildew.
2. Do not expose to high temperature, high humidity and high aldehyde pollution.
3. In an outdoor or ventilated room, it is normal to have a formaldehyde content of 0 or close to 0. For the first time, please use it for more than half an hour.
4. Since the working current of the detector is too small, only 30ma, some charging treasures will automatically power off, please replace the charging treasure that supports the small current mode.
5. Note that when measuring, please close the door and window as much as possible, the personnel should not be close to the air or move around, the large interference will affect the measurement, and the result is the most accurate after standing for half an hour. After the measurement is completed, put the instrument in the box and place it in a place where the concentration of formaldehyde is relatively low. Because it is an electrochemical sensor, where the concentration of formaldehyde is high, it is easy to make the sensor overload for a long time, resulting in a long time of 0 in the next measurement. (The recovery period after overload is longer, it may take 1-2 days to slowly dissipate)
Formaldehyde value:(Depending on the country and region, the following are reference values)
Less than 0.02 is excellent
0.02-0.05 is good
0.05-0.08 is qualified
Above 0.08 is over standard, above 0.2 is severely exceeded
Package includes
1 x Formaldehyde Detector
Weight | 0.074 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.