3pcs Geekcreit DC-DC 8A DC5-30V 150KHz Automatic Step Up Step Down Adjustable Power Module Voltage Regulation
$54.38
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Module parameters
Input voltage:DC5-30V
Input current:8A (MAX) peak 10A (6A work a long time)
Quiescent current:4mA (operating voltage is not the same there will be errors)
Output voltage:1.25-30V continuously adjustable
Output Current:10A (MAX) (5A long natural heat inside)
Output current range:0.2-10A
Working temperature:-40 to + 85 degrees
Operating frequency:150KHz
Conversion efficiency:Typical 91% (12V turn 12V5A) maximum 93%
Overcurrent protection:there
Short circuit protection:(limiting protection)
Overtemperature protection:(automatically reduce the output voltage after overtemperature)
Input reverse polarity protection:None, (if necessary, please enter the string into the diode)
Output anti-anti-irrigation:Yes, no need for charging plus blocking diode.
Connection:Terminal output, (IN is the input, OUT output)
Output current adjustment method
1. CV potentiometer adjustment, depending on your load requirements, the output voltage is set to the voltage value you need.
2. CC potentiometer counterclockwise located about 30 laps, (ie, the output current is set to a minimum), connected to the LED, potentiometer CC tune to the desired current. After charging for battery, the battery fully discharged, and then to output, adjust to your desired current CC, (be sure to use for charging batteries completely discharged before being allowed to transfer, because the battery power is left in the more, the charging current is smaller.) Please do not use the short-circuit current way of transfer, the circuit structure of the module can not short-circuit the way transfer
Package included
3 x Automatic Step Up Step Down Adjustable Power Module
Weight | 0.213 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.