2500W 50A ZVS induction Heating Module High Frequency Heating Machine Metal Heater + 48V Coil
$174.58
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Introduction
This version is a 2500W upgrade of the 1800W ZVS heating module, using an oversized PCB layout design and an oversized heat sink for heat dissipation.
Good power, self-contained cooling fan interface, can also do Tesla discharge, mark generator, high voltage inverter power supply, etc.
This product can work continuously for several hours under good heat dissipation conditions.
Feature
This induction heating circuit uses a 12-48V low-voltage DC power supply with a maximum current of 50A and a maximum power of 2500W. Continuous operation under conditions of good heat dissipation. Because of its moderate power, it can be used for DIY players to quench, annealing and other heat treatment of small parts. It can also be used with graphite crucible to smelt gold, silver, copper, aluminum and other metals. The heating is even and fast, very convenient.
Product parameters
Product size:240 x 120 x 105mm
Input voltage:12V-48V recommended above 36V
Power requirements:less than 12V ≥ 20A 15V or more ≥ 30A
Maximum power:2500W
Maximum current:50A
Heater ring inner:70mm (Recommended crucible + quartz suit, maximum support of 58mm crucible)
Recommended power:Product ID:1279188
Note
1. The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. The buyer can prepare water cooling system separately, can buy a small water pump and 2 meters of inner diameter of 4mm rubber hose.
2. You must pay attention to when using switch power supply, because the high-power switching power supply usually have soft start function, namely the output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit will be caused by lacking voltage lead to circuit can’t afford to vibrate, so that the two MOS tube conduction and burned components at the same time, so be sure to switch the power supply voltage stability and then access the induction heating circuit.
3. When heating the metal objects do not to heat too large metal, otherwise it may be overloaded with power, please add a 45A fuse or ammeter and air switch will be better. (package does not inclues)
4. Although this drive plate can withstand more than 50A current, but it is recommended that not exceed 48V 45A to prevent accidents and damage.
5. Package comes with heating circle diameter is 60 mm, design voltage is 36V, if you use more than 40 voltage power supply shall be used for inner diameter 70 mm above diameter heating ring, water pump use 12V dc power supply, please use separate power supply voltage regulator module to avoid burn out fan and water pump.
6. The minimum input voltage of the module is 12V, it doesn’t mean all the 12V power supply can be used, some novice buyers may use a smaller power supply. This module has specific voltage and current requirements, the voltage 12V current must be more than 10A power supply can be used, if the power is too low will lead to the power output is greatly reduced, when the voltage is lower than 12V, it will lead to two MOS at the same time conduction, will burn MOS tube;
7. If you find that the MOS tube fever, then the first thing to consider whether the power output meets the requirements.
8. Do not empty the board, otherwise it will issue a very high frequency of noise, and then MOS tube will burn out
9. Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small heating almost no response, and 12V power supply easily lead to the power supply output voltage decreases, below 12V is very dangerous
10. Induction heating power is great, so fever is normal, be sure to do a good job of cooling.
11. Induction heating, the power recommended more than 48V 50A switching power supply. More than 24V power supply, then more than 20A power supply, the greater the voltage, the greater the current, the greater the heating power, heating faster.
Package includes
1 x PCB board
1 x 48V copper tube
Weight | 1.572 kg |
---|
Customers Also Viewed
DC 2-12V to 12V 9V 9W USB Boost Power Supply Module Step Up Module DC Converter
$4.36Boost & Buck ModuleAdd to cartSpecificationsStarting voltage:2VInput voltage:2V-12V DCOutput voltage:12V DC (9V DC)Input current:2AOutput voltage:default 12V, 9V can be setOutput power:≤8w (in the case of input 5V, it is easy to overheat)No-load currentWorking temperature:-40 to -80 ° CBoard size:25*14*5mm (length * width * height does not include USB)The General Test Data (just for reference)Input DC2V boost to 12V output current …
DC 2-12V to 12V 9V 9W USB Boost Power Supply Module Step Up Module DC ConverterRead More
5Pcs DC24V Coil Power Relay LY2NJ JQX-13F DPDT 8 Pin PTF08A with Socket Base
$26.55Electronic Accessories & SuppliesAdd to cartSpecificationsModel:LY2NJ (8 pins)Coil voltage:DC24VCoil Power:DC (W):≤0.9AC (VA):≤1.2Contact Structure:8 pins 2 normally open 2 normally closedContact capacity:10A 250VACPull-in voltage:≤80% (V)Release voltage:DC:≥10% (V), AC:≥30%Contact resistance:≤50 (mΩ)Insulation resistance:≤100 (mΩ)Dimensions:27.5 * 21 * 35.3mmTerminals form:SocketAction time:20ms or lessReset Time:20ms or lessOperating frequencyMechanical 18,000 cycles / hourElectrical 18,000 times / hourPackage included5 x DC24V Coil Power Relay with socket base
40*160 0.5mm Blue Aluminum Alloy Water Cooling Block Radiator Liquid Cooler Heat Sink Equipment
$24.29Other Module BoardAdd to cartFeatures1. New high quality, Connector outer diameter 9.5mm, connector inner diameter 6-8mm.2. Inner flow channel extrusion.3. Welding from components to a whole one.4. Suitable for computer CPU water, industrial inverter drive, cooling, industrial switchboard cooling.5. Rate of less than 5X10-6 mbar.l/s parts.6. Internal fin thickness 0.5MM.SpecificationMaterial:luminum alloyColor:blueSize:pprox. 40x160x12mmProcessing:Vacuum auminum BrazingPackage includes1 x Water Cooling
20Pcs DS18B20 Temperature Sensor 18B20 TO-92 Encapsulation
$44.75Electronic Accessories & SuppliesAdd to cart20Pcs DS18B20 Temperature Sensor 18B20 TO-92 EncapsulationSpecificationTemperature measurement range:-55°C ~ +125°CAccuracy:± 0.5°CEncapsulation:TO-92Quantity:20pcsPackage included20 x DS18B20
20pcs WXD3-13-2W Precision Potentiometer 22K 22K Ohm Wirewound Multi-Turn Potentiometer
$49.11Module ComponentsAdd to cartSpecificationsResistance range:22K┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included20 x Potentiometer
Reviews
There are no reviews yet.