2500W 50A ZVS induction Heating Module High Frequency Heating Machine Melt Metal + 48V Coil
$216.66
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
If you want to buy 1000W 20A ZVS Induction Heating Machine:>>>Click here
Update information:The old version of the cooling fan is powered directly from the motherboard through the buck module, and is now powered by the AC100-220V power adapter. (From April 9, 2019)
The new version is update to adds supporting water pump and supporting insulation sleeve for copper ring. (From November 22, 2019, CN warehouse)
Introduction
This version is a 2500W upgrade of the 1800W ZVS heating module, using an oversized PCB layout design and an oversized heat sink for heat dissipation.
Good power, self-contained cooling fan interface, can also do Tesla discharge, mark generator, high voltage inverter power supply, etc.
This product can work continuously for several hours under good heat dissipation conditions.
Feature
This induction heating circuit uses a 12-48V low-voltage DC power supply with a maximum current of 50A and a maximum power of 2500W. Continuous operation under conditions of good heat dissipation. Because of its moderate power, it can be used for DIY players to quench, annealing and other heat treatment of small parts. It can also be used with graphite crucible to smelt gold, silver, copper, aluminum and other metals. The heating is even and fast, very convenient.
Product parameters
Product size:240 x 120 x 105mm
Input voltage:12V-48V recommended above 36V
Power requirements:less than 12V ◎ 20A 15V or more ◎ 30A
Maximum power:2500W
Maximum current:50A
Heater ring inner:70mm (Recommended crucible + quartz suit, maximum support of 58mm crucible)
Recommended power:Product ID:1279188
Note
1. The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. The buyer can prepare water cooling system separately, can buy a small water pump and 2 meters of inner diameter of 4mm rubber hose.
2. You must pay attention to when using switch power supply, because the high-power switching power supply usually have soft start function, namely the output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit will be caused by lacking voltage lead to circuit can’t afford to vibrate, so that the two MOS tube conduction and burned components at the same time, so be sure to switch the power supply voltage stability and then access the induction heating circuit.
3. When heating the metal objects do not to heat too large metal, otherwise it may be overloaded with power, please add a 45A fuse or ammeter and air switch will be better. (package does not inclues)
4. Although this drive plate can withstand more than 50A current, but it is recommended that not exceed 48V 45A to prevent accidents and damage.
5. Package comes with heating circle diameter is 60 mm, design voltage is 36V, if you use more than 40 voltage power supply shall be used for inner diameter 70 mm above diameter heating ring, water pump use 12V dc power supply, please use separate power supply voltage regulator module to avoid burn out fan and water pump.
6. The minimum input voltage of the module is 12V, it doesn’t mean all the 12V power supply can be used, some novice buyers may use a smaller power supply. This module has specific voltage and current requirements, the voltage 12V current must be more than 10A power supply can be used, if the power is too low will lead to the power output is greatly reduced, when the voltage is lower than 12V, it will lead to two MOS at the same time conduction, will burn MOS tube;
7. If you find that the MOS tube fever, then the first thing to consider whether the power output meets the requirements.
8. Do not empty the board, otherwise it will issue a very high frequency of noise, and then MOS tube will burn out
9. Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small heating almost no response, and 12V power supply easily lead to the power supply output voltage decreases, below 12V is very dangerous
10. Induction heating power is great, so fever is normal, be sure to do a good job of cooling.
11. Induction heating, the power recommended more than 48V 50A switching power supply. More than 24V power supply, then more than 20A power supply, the greater the voltage, the greater the current, the greater the heating power, heating faster.
Package includes
1 x PCB board
1 x 48V copper tube
Weight | 2.03 kg |
---|
Customers Also Viewed
50A Maxi Car Fuse with Weatherproof Holder 8AWG (8B&S) Wire Dual Battery for Car
$18.35Module ComponentsAdd to cartSpecificationColor:Black + RedSpecs:50AWire Length:15 cm(8AWG)Features50 AMP Fuse is included.This product will withstand tough jobs.It is waterproof and very heavy duty in construction.This fuse kit is perfectly suited for projects involving:4WD, 4X4, Caravan, Dual Battery, Batteries, AC DC, 12-32 Volt.Package Included1 x Maxi Blade Fuse Holder (15cm 8AWG Wire Each Side)1 x 50 Amp Fuse
HX-2S-A10 2S 8.4V-9V 8A Li-ion 18650 Lithium Battery Charger Protection Board 8.4V Overcurrent Overcharge Overdischarge Protection
$4.36Battery Protection ModuleAdd to cartSpecificationsModel:HX- 2S-A10 Maximum working current:8AMaximum instantaneous current:16AStatic current:less than 10uA Resistance:less than 300 m Ω Charging voltage:7 V – 9VOvercharging range:4.25-4.35V plus or minus 0.05VOver voltage range:2.5-3.0V plus or minus 0.05 VWorking temperature:- 40 – + 50 →Storage conditions:- 40 – + 80 →Size:41 * 8 * 2.2 mm Short circuit protection:to protect and restore …
DL14S 14S 48V BMS Battery Protection Board 15A 20A 30A 40A 50A 60A Waterproof BMS for Rechargeable Lifepo4 Electric Charge Li Lipo NiCoMn ion Cells with Balance
$37.17Battery Protection ModuleAdd to cartCurrent 15A Type Common Port / Current 20A Type Common Port / Current 30A Type Common Port / Current 40A Type Common Port / Current 50A Type Common Port / Current 60A Type Common Port / Current 15A Type Separate Port / Current 20A Type Separate Port / Current 30A T
16V16.6F Automotive Rectifier Low Temperature Starter Super Farad Capacitor Module 2.7100F
$50.18Electronic Accessories & SuppliesAdd to cartFeaturesFast charge and discharge. Long life. Large capacity. High power density. Good low temperature characteristicsSpecificationBrand:GDCPHModel:16V16.6FSeries:Super capacitor (16V)Nominal capacity:16.6FTolerance:10 %Rated voltage:15-16 VOperating temperature range:- 40→~70→Lead spacing:120mmDimensions:120*62*20mm(Length *Height *Thickness)Height-installation (maximum):62mmInstallation type:weldingCase:Aluminum capacitorApplication scope:self-provided power supply, standby power supply, alternative power supply, mobile power supplyPackage included1 x 16V16.6F Super Farad Capacitor
HC-SR505 Mini infrared PIR Motion Sensor Precise infrared Detector Module
$6.55Sensor & Detector ModuleAdd to cartHC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector ModuleIntroductionHC-SR505 small body sensing module is based on infrared technology, automatic control products, high sensitivity, high reliability, ultra-small, ultra-low-voltage operation mode. Widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.SpecificationSize:40 x 10 x 13mmNet weight:2gTechnical parameters1. Operating Voltage Range:DC4.5-20V2. Static current3. Output …
HC-SR505 Mini infrared PIR Motion Sensor Precise infrared Detector ModuleRead More
4 Blade Eco Friendly Heat Powered Wood Log Burner Fireplace Stove Fan Silent
$97.19Temperature ControllersAdd to cartFeatures– More efficient wood use – Use up to 28% less wood – Heat powered stove fan – increases the efficiency of your freestanding stove oven or wood / log burner to generate warmth economically– Eco-friendly and self-powered – a thermoelectric module acts as a small generator to power the fan’s motor– Operates automatically between …
4 Blade Eco Friendly Heat Powered Wood Log Burner Fireplace Stove Fan SilentRead More
15W Solar Charger Solar Power Panel Waterproof Folding Solar Panel Bag Solar Panel Charger
$66.81Solar PanelAdd to cartPackage Included1x 15W solar panel chargerSpecificationColor:BlackMaterial:Mono-crystalline Silicon+PET+ fabricExtended size:65*17*0.3cmFolded size:18.5* 11.5*2cmPower(MAX):15WMaximum Power Voltage (Vmp):5VMaximum Power Current (Imp):2ANumber of Cells:36pcsOutput:USB5VPackage:Neutral packagingCharging temperature:-20~70℃Waterproof:IP65Conversion rate:20%Application:security camera, laptops, car batteries, cars, coaches, ships, airplanes, satellites, space stations, outdoor farming, planting, tourism, solar street lights etcFeature– Durable and waterproof.– Light weight and thin shape can be stored more easier and …
15W Solar Charger Solar Power Panel Waterproof Folding Solar Panel Bag Solar Panel ChargerRead More
3pcs RX24 50W 100R 100RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$9.36Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
Reviews
There are no reviews yet.