3Pcs 0.1-2000MHz RF Wideband Amplifier Gain 30dB Low Noise Amplifier LNA Board Module
$48.95
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
-This product with wide frequency range, high gain, low noise figure
-This product can be applied to various RF receive front-end and increases communication distance
-Used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise RF signal amplification
Specifications
Size:25*52mm
Diameter of end:5mm
Operating frequency:0.1-2000MHz
Amplifier gain
F=0.1MHz, gain=32dB
F=500Mhz, gain=31dB
F=1000MHz, gain=29dB
F=1500Mhz, gain=25dB
F=2000MHz, gain=20dB
Maximum power output:+10dBm (10mW) @1dB Compression point
Power supply voltage:6-12 VDC
System impedance:50Ω
Tips
1.When working frequency is less than 500 MHZ, it get well gain flatness, can make it less than 1dB after careful adjustment.
The lower frequency the higher gain consistency.
2.Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1 uF, working to 0.1 MHz.
Increase the input and output capacitance appropriately,can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz.
3.When the power supply voltage changes in 5-8 v, it can be used as a variable gain amplifier,
gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit,
using DA control power supply voltage, to control the gain of the amplifier, automatic gain control
4.When the power supply voltage in the 8-10 v, the low frequency end gain up to 30 db,
at this time the amplifier has a low noise coefficient and good stability.
5.When the voltage is 12 v, reach maximum gain, the low frequency end gain of 32.5 dB.
Package included
3 x 0.1-2000MHz RF Wideband Amplifier
Weight | 0.018 kg |
---|
Customers Also Viewed
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module for
$18.58Sensor & Detector ModuleAdd to cartFeatureAdxl345 digital three-axis acceleration of gravity tilt module Ar code iic / spiName:three-axis acceleration of gravity moduleChip:the adxl345Power supply:3-5VCommunication:the IIC / SPI communication protocolMeasuring range:± 2g ± 16gSchematics, manuals and reference documentation of relevant data51, the avr, the Ar microcontroller test code3-axis, ± 2g / ± 4g / ± 8g / ± 16gPackage includes5 x …
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module forRead More
10pcs DC-DC 5-32V to 0.8-30V Power Supply Step Down Module Adjustable Buck Regulator 5A Constant LED Driver Battery Charging Voltage Board
$47.05Power Supply ModuleAdd to cartOverviewThe module uses high-quality chips, high efficiency (up to 95%), low heat generation, maximum 5A current, and TI’s op-amp control output current, making the overall output very stable.This module uses a low-ESR filter capacitor to reduce ripple voltage to 50mV!FeaturesModule nature:non-isolated buck moduleRectification mode:asynchronous rectificationWiring port:Input mode:IN+ input positive, IN- input negativeOutput mode:OUT+ output positive, …
5pcs 2 in 1 8W 3-24V to 24V Boost-Buck Dual Voltage Power Supply Module for ADC DAC LCD OP-AMP Speaker
$43.70Power Supply ModuleAdd to cartDescriptionInput voltage:3~24V, output:±24VMaximum output power:1-8W (For details, please see the description at the bottom or ask us for information.)Conversion efficiency:70-90%Quiescent current:3-4mAAccuracy:Positive voltage ±3%, Negative voltage ±5%8W DC-DC Boost-Buck Converter working frequency:400KHZ. Operating ambient temperature:-40~+85 Degrees CelsiusSize:42 x 24 x 15mmWeight:10gFeatureHigh efficiency up to 90%Built-in Frequency CompensationBuilt-in Soft-Start FunctionBuilt-in Thermal Shutdown FunctionBuilt-in Current Limit FunctionNote1. In …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-Higrow
$9.06Sensor & Detector ModuleAdd to cartGithub Link:Click here to openProducts that can be used withT-WATCH SeriesT-Watch Upgraded Version Black Product ID 1551855 T-Watch Upgraded Version White Product ID 1551854 T-Watch Basic Version Product ID 1501125 T-Watch Basic Version with Silicone Shell Product ID 1722494 TTV:Product ID 1777327 T-Higrow:Product ID IntroductionThe LILYGO T-FH interface sensor is the abbreviation of female header. …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-HigrowRead More
10pairs MC4 Connector+1pair Spanner Male Female 30A Cable Plug MC4 Connector Solar Panel Branch Series Connect Solar System
$28.42Electronic Accessories & SuppliesAdd to cartDescriptionItem no:MC4Rated voltage:1000 VRated impulse voltage:1000 VRated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉Test voltage:6 kV (50 Hz)Protection grade:IP67Insulation material:PC/PAContact material:Copper, silver-platedOperating temperature:-40°C ~ +90°CSafety class:IIFlame class:UL94-V0Contact resistance:≤5mΩInsertion / Withdrawal force:≤50N / ≥50NSuitable for cables:10, 12, 14 AWG (2.5mm2/4mm2/6mm2😉Locking system:Snap-inPackage included10pairs x MC4 Connectors1pair x MC4 Spanner
10Pcs 1 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$12.56Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:23*20mmPackage Included10 x 1 Key Press Film Switch
Reviews
There are no reviews yet.