3Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module for Phone MP3 MP4
$10.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class.
Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge.
Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W.
This module uses multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)!
This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone.
Specification
Module properties:Non-isolated step-up module (BOOST)
Input voltage:2.5-6V
Output voltage:4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v)
Output current:1000mA (Max)
Efficiency:92%(Max) (the higher the input voltage, the higher the efficiency)
Switching frequency:1MHz
Output ripple:20mV (MAX)
Operating temperature:Industrial (-40°c to +85°c)
Voltage regulation:±2.5%
Short circuit protection:None (please use the lithium battery with protection)
Input:IN + postive, IN – negative
Output:USB output
Size:3 x 1.3 x 0.8cm
Application
This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging.
DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.
In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.
Note
This module is a fixed 5V output module
Modules indicated above IN – (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module
This module has an LED light, when the charge when the LED lights can be used as indicator
Package included
3 x USB boost module
Weight | 0.0024 kg |
---|
Customers Also Viewed
5pcs Blue Light Mini 0.36 inch DC Current Meter DC0-999mA 4-30V Digital Display with Reverse Connection Protection Ammeter
$43.50Test & Measuring ModuleAdd to cartFeatureModule name:Current display module:Measurement accuracy:0.10%Refresh rate:About 200ms – times:Display method:Three digits 0. 36inch digital tubeMeasuring range:0A-999mA:Power supply range:4V-30VWorking current:Less than 8mA:Display color:BlueStorage temperature:-10°C to +65°C:Input resistance:50 milliohmsWeight:10g:Peripheral size:35*14*10mmWiring diagram– The ground wire of power supply end and measuring end of this ammeter adopts common ground design, that is, the ground wire of the power supply …
ISD1820 3-5V Recording Voice Module Recording And Playback Module Control Loop Play / Jog Play / Single Play
$8.73Sensor & Detector ModuleAdd to cartDescriptions Main chip:ISD1820 Size:38.5 x 42.8mm Operating voltage:DC 3~5V Features Easy to use 10 second voice recording and playback. High quality, natural voice restore. Can be used as a megaphone module. With loop play, jog play, single play function. control. This module can directly drive 8 ohm 0.5W small speakers. Power supply:3-5V, can be connected …
15pairs MC Connector Male Female 30A 1000V with 1pair MC Spanner Solar Panel Branch Series Connect Solar System
$42.07Electronic Accessories & SuppliesAdd to cartDescriptionRated voltage:1000 V Rated impulse voltage:1000 V Rated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉 Test voltage:6 kV (50 Hz) Protection grade:IP67 Insulation material:PC/PA Contact material:Copper, silver-plated Operating temperature:-40°C ~ +90°C Safety class:II Flame class:UL94-V0 Contact resistance:≤5mΩ Insertion / Withdrawal force:≤50N / ≥50N Suitable for cables:10, 12, 14 …
10Pcs TJA1050 CAN Controller interface Module BUS Driver interface Module
$22.99Driver ModuleAdd to cartDescription1. onboard TJA1050 CAN controller interface chip2. chip commonly used pin has led, convenient connection to use3. pin 5 v to power supply4. PCB board size:22 (mm) x11.5 (mm)Package included10 x TJA1050 CAN Controller Interface Module
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/s
$10.92Card ReaderAdd to cartDescriptionRC522 chipMF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the ‘table’ application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of …
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/sRead More
Reviews
There are no reviews yet.