3Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module for Phone MP3 MP4
$10.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class.
Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge.
Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W.
This module uses multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)!
This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone.
Specification
Module properties:Non-isolated step-up module (BOOST)
Input voltage:2.5-6V
Output voltage:4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v)
Output current:1000mA (Max)
Efficiency:92%(Max) (the higher the input voltage, the higher the efficiency)
Switching frequency:1MHz
Output ripple:20mV (MAX)
Operating temperature:Industrial (-40°c to +85°c)
Voltage regulation:±2.5%
Short circuit protection:None (please use the lithium battery with protection)
Input:IN + postive, IN – negative
Output:USB output
Size:3 x 1.3 x 0.8cm
Application
This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging.
DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.
In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.
Note
This module is a fixed 5V output module
Modules indicated above IN – (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module
This module has an LED light, when the charge when the LED lights can be used as indicator
Package included
3 x USB boost module
Weight | 0.0024 kg |
---|
Customers Also Viewed
ESP8266 Development Kit with Display Screen TFT Show Image Or Word By Nodemcu Board DIY Kit
$32.79Smart ModuleAdd to cartDescriptionThis product kit can be used for some of the functions of the application of things, for example, display temperature and humidity, weather data display.TFT screen informationTFT screen and NodeMCU connection diagramPackage included1 x NodeMCU1 x 1.44 inch TFT screen8 x DuPont line
Band Pass RF Filter Band Pass 1420MHz BPF SMA-K
$93.91RF amplifierAdd to cartFeature1) Operating frequency:1420÷50MHz2) Insertion loss:1.8db3) Out-of-band suppression:40dB@50MHz4) Input impedance:50 ohm5) Output impedance:50 ohms6) Maximum input signal strength:13dbm (20mw)7) Input interface:SMA-K (SMA female)8) Output interface:SMA-K (SMA female)9) Dimensions:35*22*11mm10) Product weight:22gPackage includes1 x Band Pass RF Filter Band Pass 1420MHz BPF
XH-M548 2x120W Power Bluetooth Dual Channel Digital Amplifier Module TPA3116D2 Audio Amplifier Board
$28.42Amplifier BoardAdd to cartDescriptionThis product is a built-in TPA3116D2 chip with the power of 2*120W Bluetooth channel digital power amplifier board.SpecificationsParameterValueChipTPA3116D2Supply voltageDC12-24VOutput power120W*2 Supply currentMore than 3APower ratioMore than 90%Bluetooth moduleBTM835/CRS8635 (4.0 version)Transmission distanceMax 10M( without interfere)Vocal tract number2 channel (High bass control)switching frequency1.2MHzAppearance size98*80*18mmModels that support Bluetooth connectivityAndroid seriesIOS seriesWindows series Bluetooth connection methodTake mobile phone as …
3Pcs J03 LED Digital Time Delay Relay DC 6-30V on off Trigger Delay Timming Timer Switch Micro USB Power Supply 5V 12V
$32.79Relay ModuleAdd to cartFeatures1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;3. The emergency stop function (“STOP’key);With reverse polarity protection, reverse polarity will not burn the product.4. Increase the sleep mode, if this mode is enabled, …
50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector Red
$8.99Terminal BlocksAdd to cartDescription50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector RedFeaturesEasy crimping with normal tool.Quick installation without striping wire job.Safety insulator tap.Suitable for Conductors in the rangeConductor CSA (Cross Sectional Area) 0.5 – 1.0mm², AWG (American Wire Gauge) 22 -18.Make Quick Connections without stripping.Easy crimping with normal tool, squeeze down the metal insert with pliers and …
50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector RedRead More
Excellway PCT-2 50pcs 2Pin Colorful Docking Connector Electrical Connectors Wire Terminal Block Universal Electrical Wire Connector
$54.66ConnectorsAdd to cart50pcs 2Pins Colorful Docking Connector Reusable Spring Terminal Block Electric Cable Wire Connector Main Features Wire connector. No wire loose, the risk of crisp tape, transparent and safe to see. With a test hole, measuring voltage, without removing the tape. Direct plug, insert the wrong can be pulled out, re-connected. Each contact point at the …
RIDEN 7 in 1 33V 10A Multifunction White OLED Digital Electrical Parameter Tester Ammeter
$26.23Power Supply ModuleAdd to cartSupport function:Voltage, Current, Time, Power, Temperature, Capacity, Energy, Run TimeFeatureOLED:WhiteVoltage:33VCurrent:10ANote:The measurement range are for reference match only, please check the value according to the voltage and current.Package includes1 x 33V 10A Electrical Parameter Tester
Reviews
There are no reviews yet.