Q206 PCF8563 PCF8563T 8563 Module Clock Module RTC Module DIY Clock Kit
$4.36
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1.All that might be used is that in addition to the two required ports of SDA and SCL, the ints and COT that might be used are also cited.
2.Spare battery:when the system is out of power, the backup battery will power PCF8563 chip, PCF8563 low power consumption, and ensure that the battery can be used for normal power supply for ten years.
3.Crystal vibration:the new original original product crystal vibration, guaranteed the chip PCF8563 stable, accurate time.
4.The advantage of the chip itself:in the actual project of the shop owner, a variety of clock chips have been applied, and it is 5.found that this chip of philip is the most stable, the most accurate and the lowest power consumption. Clock chips such as DS1302 are too weak to recommend PCF8563 clock chips.
Performance Indicators
*It can be powered by a spare battery.
*Wide voltage range 1.0~ 5.5v.
*Ultra low power consumption:a typical value of 0.25uA.
*Through the I2C bus serial input/output.
*The output frequency of the programmable clock is 32.768khz, 1024Hz, 32Hz, 1Hz.
*There are four alarm functions and timer functions.
*It contains reset circuit, oscillator capacitance and power loss detection circuit.
*To open the leakage interrupt output.
*Read and write 400KHZ.
* Right INT interrupt output (generally not available)
* Cotangent clock output terminal (usually not available)
* The SCL IIC clock interface is connected to the single chip computer IO port.
* SDA IIC digital interface connected with single chip microcomputer IO port.
* The GND module is externally connected.
* VCC power interface external to 3.3v-5v.
Package Included
1x Clock Module
Weight | 0.006 kg |
---|
Customers Also Viewed
10pcs ZF-1 ASK 315MHz Fixed Code Learning Code Transmission Module Wireless Remote Control Receiving Board
$33.80Smart ModuleAdd to cartFeatureProduct model:ZF-7 (with code)Transmission frequency:315MHZWorking voltage:DC 9V ~12VModulation method:ASKQuiescent current:0uAWorking current:30~45mACoding type:fixed code (SC2262)Radiated power:30~45mWTransmission distance:1000 meters (receiver sensitivity -108dBm)Volume:40mm*20mm*10mm:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:-:Negative power supply3:+:Positive power supply4:H-L:Digital pinRated parameter:Symbol:ValueDC supply voltage:VDD-VSS:9V-12VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°CPackage includes10 x Receiver Board
2pcs Digital DC 0-100V 0-10A 250W Tester DC7-12V LCD Digital Display Voltage Current Power Meter Voltmeter Ammeter Amp Detector Geekcreit for Arduino – products that work with official for Arduino boards
$34.98Test & Measuring ModuleAdd to cartSpecificationsSimultaneous display of voltage and currentVoltage Measurement Range:DC 0-100VCurrent Measurement Range:0-10APower Measurement Range:0-1000WVoltage Error Range:÷1% (Adjustable)Current Error Range:÷1% (Adjustable)Power Error Range:÷1% (Adjustable)Refresh Rate:300ms/TimesDisplay Method:HTN LCD 3 Rows of 3 DigitsSupply Voltage:DC 7-12VWorking CurrentWorking Temperature:-10 to 60→Package Included2 x DC Digital Voltmeter Ammeter 4 x Cable
5pcs ESP8285 Development Board Nodemcu-M Based on ESP-M3 WiFi Wireless Module Compatible with Nodemcu Lua V3
$49.76Motherboard & Development BoardAdd to cartOverview1. It is fully compatible with Nodemcu V3, but cheaper than it is. NodeMcu is an open source firmware and development tool that helps you prototype your IOT products in several Lua script lines.2. The ESP8285-based development kit integrates GPIO, PWM, IIC, 1-Wire and ADC into a single board.3. The fastest way with the NodeMCU …
Vacuum Cleaner Charger Base for iRobot Roomba 5 6 7 8 9 Serie 595 780 880 860 980 960 Charger Base Dock
$85.04Solar CollectorsAdd to cartSpecificationName:Charger Base DockModel:C04612Material:Plastic Color:Black Size:As picture shownApplication Models:For iRobot Roomba 500/600/700/800/900Features-Let the robot automatically recharge when there is no power.-A good helper for family cleaning.Package Include1 x Charger Base Dock1 x Charger Cable
DC 12V 3.5mA Microphone Pickup Audio Microphone Amplifier Module DIY Kit Dual Track Output Gain Adjustable
$4.93DIY Electronic KitsAdd to cartDescriptionProduct name:Microphone with adjustable sensitivityWorking voltage:DC9-15V, 12V recommendedWorking current:above 100mAResponse frequency:20Hz-20KHzMonitoring range:about 100 square metersFinished product size:length 56 * width 25 * height 16mmProduct net weight:15 gramsThe power input has anti-reverse protection, which can effectively prevent the module from being damaged if the power is reversed.Product descriptionThis product uses a low-noise processing chip, plus a …
3pcs 5V LED Traffic Light Display Module Electronic Building Blocks Board
$4.85Display ScreenAdd to cartFeatureSize:56 x 21 x 11mmFixing hole:3mmPitch:15mmColor:red yellow greenLED:8mm x 3Brightness:Normal brightnessVoltage:5VInput:Digital levelInterface:common cathode, red, yellow and green separate controlPlatform:, microcontrollerPackage includes3 x LED Traffic Light Module
Upgraded Version 3D Light Cube Kit 8x8x8 Blue LED MP3 Music Spectrum DIY Electronic Kit
$72.16DIY Electronic KitsAdd to cartNote1. This product does not include housing!! if you need the housing, please purchased separately (Product ID:1247731).2. This is a DIY kit, you need to have some knowledge of electronics and ability.3. Need a lot of soldering, you should have enough patience.4. 8x8x8 blue lights display version.5. APP function only supports Android6. File:Click here to …
Upgraded Version 3D Light Cube Kit 8x8x8 Blue LED MP3 Music Spectrum DIY Electronic KitRead More
Reviews
There are no reviews yet.