XY-DJ01 DC6-30V 30A 1CH Digital Display Relay Module Delayed Power off Trigger Delay Cycle Timing Circuit Switch Rail Type
$26.88
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical;
2. Support button trigger control, high and low level trigger, switch value control, support NPN, PNP sensor access, suitable for most occasions;
3. Wide voltage supply (6~30V),Rail installation, very convenient to use;
4. There is a key pausing function, with reverse connection protection, reverse connection does not burn;
5. Added sleep mode. After enabling, without any operation for about 5 minutes, the LCD backlight will be automatically turned off; any key to wake up;
6. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately;
7. All set parameters are automatically saved after power-off.
Operating mode
P0:After the signal is triggered, the relay is turned on for OP time, and then off; within the OP time, the signal is triggered again invalid
P1:After the signal is triggered, the relay is turned on for OP time and then off; within the OP time, the signal is triggered again to re-timing
P2:After the signal is triggered, the relay is turned on for OP time and then turned off; within the OP time, the signal triggers reset again, the relay is turned off, and the timing stops
P3:After the signal is triggered, the relay is turned off for CL time, and then the relay is turned on;
P4:After the trigger signal is given, the relay is turned on for OP time, the relay is disconnected for CL time, and then the above actions are cycled, the signal is given again in the cycle, the initial state is restored, and the timing is stopped; the number of cycles (LOP) can be set; the cycle ends, keep the relay off ;
P5:Give the trigger signal, after the relay is disconnected from the CL time, the relay will be turned on for OP time, and then cycle the above actions, give the signal again in the cycle, restore the initial state, and stop timing; the number of cycles (LOP) can be set; the cycle ends, keep the relay on ;
P6:After power-on, no trigger signal is needed, the relay is on for OP time, the relay is off for CL time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle is over, keep the relay off;
P7:There is no need to trigger signal after power-on, the relay is off CL time, the relay is on OP time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle ends and the relay is kept on;
P8:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains on; when the signal disappears, the relay is disconnected after timing OP; during the timing, there is a signal again, and the timer is clear;
P9:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains off; when the signal disappears, the relay is turned on after timing CL; during the timing, there is another signal, and the timer is cleared;
(P0~P7) mode, short press the pausing button, when the system does not trigger the timing, the system starts timing; when the system is already timing, the system pauses timing, the relay is disconnected, and flashes ‘OUT’ as a reminder;
In P8 P9 mode, the pausing button on the running interface is used as the trigger signal, and its button function is disabled by short press/long press;
Product parameter
Working voltage:6-30V power supply
Trigger signal source:high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch).
Output capacity:can control equipment within DC 30v 30A or AC 220v 30A
Quiescent current:15mA
Working current:50-130mA
Service life:more than 100,000 times;
Working temperature:-40-85→;
With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, set parameters are always remembered after power failure.
Timing range
0.01 second (minimum) ~ 9999 minutes (maximum) continuously adjustable
How to choose the timing range
In the OP/CL parameter modification interface, short press the pausing button to select the timing range;
XXXX No decimal point, timing range 1 second~9999 seconds
XXX.X The decimal point is in the tenth place, and the timing range is 0.1 seconds to 999.9 seconds
XX.XX The decimal point is in hundreds, and the timing range 0.01 seconds to 99.99 seconds
X.X.X.X All decimal points are lit, timing range 1 minute to 9999 minutes
For example, if you want to set the OP to 3.2 seconds, move the decimal point to the tens place, and the LCD will display 003.2
Parameter description:OP on time, CL off time, LOP cycle times (1-9999 times, ‘—-‘ represents infinite cycles)
parameter settings
a) Enter the setting interface by long pressing the setting button;
b) First set the work mode, the work mode flashes to remind, short press the increase/decrease button to set the work mode;
c) Short press the setting button, select the working mode, and enter the system parameter setting;
d) In the system parameter setting interface, short press the setting button to switch the system parameter to be modified, and short press/long press the increase/decrease button to modify;
(Note:Short press the setting button is invalid in P0~P3/P8/P9 mode);
e) In the OP/CL parameter modification interface, short press the pausing button to switch the timing unit (1s/0.1s/0.01s/1min)
f) After setting all parameters, long press the setting button to save the parameter setting and exit the setting interface;
Additional functions
a)Automatic sleep function:In the running interface (P0~P7 mode), long press the pausing button to start or close the automatic sleep function (LP selects on to start the sleep function, about five minutes, without any operation, the LCD backlight automatically turns off , The system is running normally, any key is pressed to wake up; off is to close the sleep function);
b) Parameter view:In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system;
c) Display content switching:In P4 ~ P7 mode, short press the DOWN key to switch the display content (operating time/cycle times);
Package included
1 x Relay Module Switch
Weight | 0.03 kg |
---|
Customers Also Viewed
5Pcs Aluminum Alloy Heatsink Cooling Pad for High Power LED IC Chip Cooler Radiator Heat Sink 69*69*37mm
$48.03Module ComponentsAdd to cartSpecificationMaterial:Aluminum 6063-T5Processing method:machine sawingNumber of gears:24Size:69*69*37mmlength:69mmUsed for IC ,Diode, Dynatron ,Electronic ,LED,RAM,CHIP computer’s component heat dissipation, or anywhere you need a small efficient heatsink.Package Included5 x Aluminum Alloy Heatsink
5Pcs 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$125.01Amplifier BoardAdd to cartThis is 1002 HIFI ,If you need other parameters, please click ID to buy.502C HIFI ID:1582750502L MINI ID:16526301002L MINI ID:1652631SpecificationsFeatures– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.– TPA3116D2 is a type D amplifier IC launched by TI …
5Pcs STK4132 50W+50W DX-0408 2.0 Channel STK Thick Film Series Amplifier board 10HZ-20KHZ
$106.46Amplifier BoardAdd to cartFeatureModel:STK4132 (4102/4122/4132/4152/4172/4162/4182 Random delivery)Working voltage:double AC15-18VOutput power:50W + 50WOp Amp Type:4558Frequency response:10HZ-20KHZWeight:194g(1pcs)Size:13 x 10 x 6cmPackage includes5 x Amplifier board
21pcs 7colors ZY-25 Mini Solderless PCB Circuit Test Breadboard
$15.86Electronic Accessories & SuppliesAdd to cart21pcs 7colors ZY-25 Mini Solderless PCB Circuit Test BreadboardDescriptionUsage:experiment, testing and robot.Color:Yellow, white, cyan, red, blue, green, blackSpecificationSize dimension:20mm x 15mm x 12mmMode:ZY-25Number of hole:25Single sideInsulating material:ABS plasticThickness of insulating layer:generalReinforcing material:composite materialFeatureIt can be recycled and recycling.It is easy to use this breadboardYou can piece the breadboard together in fixed unitPackage included21 x Breadboard
10ml Continuous injection Self Refill Vaccinator Poultry Syringe
$48.59Lab ChemicalsAdd to cartDescription10ml Continuous Injection Syringe is mainly used for small animals to the prevention and treatment of disease.SpecificationMaterial:PlasticSize:As shownColor:YellowFeatures Easy to use gun suitable for all drench types both oral and pour on. Rotary adjustment switch function. Infinitely adjustable dose from 0.5ml to 10ml. Unbreakable barrel for long life.Package Included1 x 0.5-10ml Continuous Drench Gun1 x …
10ml Continuous injection Self Refill Vaccinator Poultry SyringeRead More
Robotdyn RFID Reader Writer NFC Module MFRC522 Board
$17.13Card ReaderAdd to cartFeatureThis RFID module base on MFRC522 IC and that can read and write Mifare’s tags. The microcontroller and card reader uses SPI for communication. The card reader and the tags communicate using a 13.56MHz electromagnetic field. The RFID MFRC522 module supports MF1xxS20, MF1xxS70 and MF1xxS50 tags. The RFID MFRC522 module supports contactless communication and uses …
Robotdyn RFID Reader Writer NFC Module MFRC522 BoardRead More
5Pcs DIY CD4060 Music LED Light Kit Electronic Training DC 3V-5V
$25.39DIY Electronic KitsAdd to cartIntroduction to the circuit principleIC2:CD4060 is a 14-stage two-way counter with oscillator, R1, R2, RP1, C1 and IC2 9,10,11 feet circuit composed of the oscillator, the oscillation frequency can be adjusted by the RP1.Transistor Q1, Q2, Q3 play a driving role, D1, D2, D3 play a role in the cycle of reset. IC2 Q5, Q6, …
5Pcs DIY CD4060 Music LED Light Kit Electronic Training DC 3V-5VRead More
Reviews
There are no reviews yet.