XY-DJ01 DC6-30V 30A 1CH Digital Display Relay Module Delayed Power off Trigger Delay Cycle Timing Circuit Switch Rail Type
$26.88
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical;
2. Support button trigger control, high and low level trigger, switch value control, support NPN, PNP sensor access, suitable for most occasions;
3. Wide voltage supply (6~30V),Rail installation, very convenient to use;
4. There is a key pausing function, with reverse connection protection, reverse connection does not burn;
5. Added sleep mode. After enabling, without any operation for about 5 minutes, the LCD backlight will be automatically turned off; any key to wake up;
6. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately;
7. All set parameters are automatically saved after power-off.
Operating mode
P0:After the signal is triggered, the relay is turned on for OP time, and then off; within the OP time, the signal is triggered again invalid
P1:After the signal is triggered, the relay is turned on for OP time and then off; within the OP time, the signal is triggered again to re-timing
P2:After the signal is triggered, the relay is turned on for OP time and then turned off; within the OP time, the signal triggers reset again, the relay is turned off, and the timing stops
P3:After the signal is triggered, the relay is turned off for CL time, and then the relay is turned on;
P4:After the trigger signal is given, the relay is turned on for OP time, the relay is disconnected for CL time, and then the above actions are cycled, the signal is given again in the cycle, the initial state is restored, and the timing is stopped; the number of cycles (LOP) can be set; the cycle ends, keep the relay off ;
P5:Give the trigger signal, after the relay is disconnected from the CL time, the relay will be turned on for OP time, and then cycle the above actions, give the signal again in the cycle, restore the initial state, and stop timing; the number of cycles (LOP) can be set; the cycle ends, keep the relay on ;
P6:After power-on, no trigger signal is needed, the relay is on for OP time, the relay is off for CL time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle is over, keep the relay off;
P7:There is no need to trigger signal after power-on, the relay is off CL time, the relay is on OP time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle ends and the relay is kept on;
P8:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains on; when the signal disappears, the relay is disconnected after timing OP; during the timing, there is a signal again, and the timer is clear;
P9:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains off; when the signal disappears, the relay is turned on after timing CL; during the timing, there is another signal, and the timer is cleared;
(P0~P7) mode, short press the pausing button, when the system does not trigger the timing, the system starts timing; when the system is already timing, the system pauses timing, the relay is disconnected, and flashes ‘OUT’ as a reminder;
In P8 P9 mode, the pausing button on the running interface is used as the trigger signal, and its button function is disabled by short press/long press;
Product parameter
Working voltage:6-30V power supply
Trigger signal source:high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch).
Output capacity:can control equipment within DC 30v 30A or AC 220v 30A
Quiescent current:15mA
Working current:50-130mA
Service life:more than 100,000 times;
Working temperature:-40-85→;
With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, set parameters are always remembered after power failure.
Timing range
0.01 second (minimum) ~ 9999 minutes (maximum) continuously adjustable
How to choose the timing range
In the OP/CL parameter modification interface, short press the pausing button to select the timing range;
XXXX No decimal point, timing range 1 second~9999 seconds
XXX.X The decimal point is in the tenth place, and the timing range is 0.1 seconds to 999.9 seconds
XX.XX The decimal point is in hundreds, and the timing range 0.01 seconds to 99.99 seconds
X.X.X.X All decimal points are lit, timing range 1 minute to 9999 minutes
For example, if you want to set the OP to 3.2 seconds, move the decimal point to the tens place, and the LCD will display 003.2
Parameter description:OP on time, CL off time, LOP cycle times (1-9999 times, ‘—-‘ represents infinite cycles)
parameter settings
a) Enter the setting interface by long pressing the setting button;
b) First set the work mode, the work mode flashes to remind, short press the increase/decrease button to set the work mode;
c) Short press the setting button, select the working mode, and enter the system parameter setting;
d) In the system parameter setting interface, short press the setting button to switch the system parameter to be modified, and short press/long press the increase/decrease button to modify;
(Note:Short press the setting button is invalid in P0~P3/P8/P9 mode);
e) In the OP/CL parameter modification interface, short press the pausing button to switch the timing unit (1s/0.1s/0.01s/1min)
f) After setting all parameters, long press the setting button to save the parameter setting and exit the setting interface;
Additional functions
a)Automatic sleep function:In the running interface (P0~P7 mode), long press the pausing button to start or close the automatic sleep function (LP selects on to start the sleep function, about five minutes, without any operation, the LCD backlight automatically turns off , The system is running normally, any key is pressed to wake up; off is to close the sleep function);
b) Parameter view:In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system;
c) Display content switching:In P4 ~ P7 mode, short press the DOWN key to switch the display content (operating time/cycle times);
Package included
1 x Relay Module Switch
Weight | 0.03 kg |
---|
Customers Also Viewed
20pcs Sound Module for Electronic Toy IC Chip Voice Recorder 120s 120secs Recording Playback Talking Music Audio Recordable Board Gift
$85.21Other Module BoardAdd to cartSpecificationsOperating Voltage:3-5VStandby CurrentRecording Time:120sRecording Input:adopt ADC 14 Bit,Audio Out DAC 14 BitRecording Voice Format:ADPCMRecording Distance:3-5mRecording/Voice Play Mode:independently play a piece of sound recording or play a piece of prerecordig voiceCycle Mode Play:can set cycle play times or constant cycle playPrerecording voice is burnt from external to SPI Flash,can prerecord chord music or voiceAdaptive Loudspeaker:8-32 ohm …
10pcs 130 Small Motor DIY Homemade Fan Toy Accessories
$10.33Module ComponentsAdd to cartFeatureThree-leaf soft paddle, the central ring yellow cap is ABS green plastic, the surrounding fan blade is super soft silicone material, even if it is touched by hand when transporting, it will not be injured, it is very suitable for young makers DIY use; Used with the motor will make your DIY work more convenient.MotorSize:25*20*15mm3-6V …
10pcs 130 Small Motor DIY Homemade Fan Toy AccessoriesRead More
10pcs CJMCU-9930 APDS-9930 Proximity and Non Contact Gesture Recognition Detection Attitude Sensor
$33.33Sensor & Detector ModuleAdd to cartFeatures• Optical modules integrated with ALS, infrared LEDs and proximity detectors• Ambient Light Sensing (ALS) – Approximate human visual response – Programmable interrupt capability with upper and lower thresholds – Up to 16-bit resolution – High sensitivity operation behind dark glass – 0.01lux low lumen performance• Proximity detection – Fully calibrated to 100 mm detection …
150pcs LED RGB Common Cathode 4-Pin F5 5MM Diode
$19.32Electronic Accessories & SuppliesAdd to cartFeaturesConvenient for DIY and repair equipment and electrical appliancesPerfect use for home, office and industry electrical equipment and electrical appliancesCurrent:20mAVoltage:3VSize:5mm Light Color:RED, BLUE, GREENPackage included150 x Cathode 4-PINS F5 5mm LED Light
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish Tank
$32.87Electronic Accessories & SuppliesAdd to cartSpecifications1. Volt:220v2. Power:100w3. Microcomputer control,Power off memory function4. Made of high-intensity anti-explosion and corrosion protection material5. Ideal for use in either saltwater or freshwater aquariums6. Electronic temperature control, high accuracy:±1→7. Easy to read and adjust the temperature8. Fixed to the glass by suction9. Adjustable temperature is 16-36 degreePackage included1 x Fish tank heater1 x English …
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish TankRead More
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator Module
$10.84Boost & Buck ModuleAdd to cartDescription– DC DC Boost Converter Module working frequency 1MHZ. – Up to 93% Efficiency (usually is 84%-91%) – Quiescent current:190uA.– Current Limit Program(0.5-2.5A,Default 1.8A) – Size:21 x 11 x 4mm– Weight:1.5g– ProtectionOver current protection(OCP)Over voltage protection(OVP)Short circuit protection(SCP)Over temperature protection(OTP) Output 5VInput voltage DC 2.6 ~ 4.5V,output DC 5V±3%Maximum output:5V/1300MA(See the table below for details) …
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator ModuleRead More
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling Heatsink
$15.34Electronic Accessories & SuppliesAdd to cartFeatures3pin ultra silent LED case fan.Each fan is With 15 LED lights.Connect to power supply or motherboard.Anti-vibration rubber pads on all four corners keep the fan super silent.It offers incredible cooling to increase the longevity and stability of the system and components.Cooling fan for desktop computer case and CPU cooler.SpecificationLED Light Color:Colorful MarqueeCompatible CPU:Computer Case …
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling HeatsinkRead More
Reviews
There are no reviews yet.