3Pcs J03 LED Digital Time Delay Relay DC 6-30V on off Trigger Delay Timming Timer Switch Micro USB Power Supply 5V 12V
$32.79
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;
2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;
3. The emergency stop function (“STOP’key);With reverse polarity protection, reverse polarity will not burn the product.
4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;
5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved;
6. After the module is powered down, all parameter settings are not lost.
Product parameters
1:Operating voltage:6–30V, support microUSB 5.0V power supply
2:Trigger Source:Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
3:Output capability:You can control the DC 30VDC 5A or 220VAC 5A device.
4:Quiescent Current:20mA; Operating Current:50mA
5:Life:more than 10 million times; Working temperature:-40→-85 →; Size:6.2*3.8*1.7cm.
6:With optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
Special Note:The relay outputs are passive contact, just a switch.
Operating mode
P1:trigger signal, the relay is on ‘OP’ time, and then disconnect; in the ‘OP’ time, as follows
P1.1:signal is triggered again, invalid
P1.2:signal is triggered again, the clock is reset
P1.3:Signal trigger again, relay off, stop the clock;
P-2:trigger signal, the relay off ‘CL’ of time, the relay on ‘OP’ time, and then disconnect relay;
P3.1:trigger signal, the relay is turned on after the ‘OP’ time, the relay off ‘CL’ time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( ‘LOP ‘) can be set.
P3.2:without triggering signal, the relay is on ‘OP’ time, the relay off ‘CL’ time, and has been cycling; frequency ( ‘LOP’) cycle can be set;
P-4:signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing ‘OP’ time, the relay is; if another signal during timing, timing is cleared.
Timing range
0.1 seconds (min) to 999 minutes (max) continuously adjustable
How to choose the time range
After setting the mode selection screen parameter value by a short press ‘STOP’ button to select the time range;
XXX. decimal point in the unit place, time range:1 second to 999 seconds.
XX. X decimal point in decade place, Timing range:0.1 seconds to 99.9 seconds
X. X. X. decimal full brightness, Timing range:1 minute to 999 minutes.
For example, you want to set ‘OP’ is 3.2 seconds, then move the decimal point to decade place, the digital display 03.2
Parameter description:’OP’ – conduction time, ‘CL’ – off time, ‘LOP’ – the number of cycles (1-999 times, ‘—‘ represents infinite loop).
These parameters are independent of each other, but is shared by each mode. For example, in P1.1 mode, set the on-time ‘OP’ is 5 seconds, if you switch to P1.2 mode, it’s ‘OP’ will be 5 seconds too.
In the main interface (display 000), short press ‘SET’ button will display ‘OP’ ( ‘CL’, ‘LOP’) and the corresponding time XXX;
Some parameters only mode ‘OP’ (such as the mode P1.1, P1.2, P1.3), short press the ‘SET’ key to display only the “OP” and the corresponding time;
Some models have parameters ‘OP’,’CL’, ‘LOP’ (such as the mode P3.1, P3.2), short press ‘SET’ button will display ‘OP’ and the corresponding time, “CL” and the corresponding time, “LOP” and the corresponding number of times;
In the main interface by short press ‘SET’ key to see information about the parameters of the current mode, very convenient!
How to set parameters
1. First, read the instructions to determine the required operating mode.
2. The module is powered up, the display at the current work mode (P1.1 default mode), then enter the main interface; press ‘SET’ button for 2 seconds after release to enter mode selection interface; a short time by pressing ‘UP’, ‘DOWN’ key to select the mode (P1.1 ~ P-4).
3. Select the mode (such as P3.2), short press the ‘SET’ button, then the parameter to be set flashes ( ‘OP’on-time, ‘CL’ off time, ‘LOP’ cycles ( ‘—‘ represents infinite loop)), by ‘UP’, ‘DOWN’ keys to adjust the parameter value, support long press (rapid increase or decrease) and short press (increase or decrease one unit); then short press the ‘STOP’ key to select the decimal point position, select the time range (0.1 seconds to 999 minutes); short press the ‘SET’ button to set the next parameters of the current mode of procedure is as above.
4. After the parameters are set, long press ‘SET’ button for 2 seconds then release, the name of the current mode will flash once, and then return to the main screen, set the parameters of success!
The main interface:In the relay does not work status display ‘000’ (no decimal point), with a decimal point under relay state.
Mode selection screen:Long press the ‘SET’ key to enter, after setting is completed, long press the ‘SET’ key to exit back to the main screen.
‘STOP’ button extensions
Relays enable mode
1. ON:Relay allows conduction in the ‘OP’ on-time;
2. OFF:relay prohibit conduction is always closed;
In the main interface, short press the ‘STOP’ button to switch between ON and OFF, the current in which the state will flash, and then return to the main screen. (This feature is an emergency stop function, click off the relay)
Sleep mode
1. ‘C-P’ Sleep mode:five minutes without any operation, the digital display automatically turns off, the program running as usual;
2. ‘O-d’ normal mode:digital display always open;
Press the ‘STOP’ button for two seconds and then release to switch ‘C-P’ and ‘O-d’ state, in which the current state of flashes and then return to the main screen.
Package Included
3 x DC 1 Channel Time Delay Relay Module
3 x Shell Case
Weight | 0.222 kg |
---|
Customers Also Viewed
5Pcs Aluminum Alloy Heatsink Cooling Pad for High Power LED IC Chip Cooler Radiator Heat Sink 69*69*37mm
$48.03Module ComponentsAdd to cartSpecificationMaterial:Aluminum 6063-T5Processing method:machine sawingNumber of gears:24Size:69*69*37mmlength:69mmUsed for IC ,Diode, Dynatron ,Electronic ,LED,RAM,CHIP computer’s component heat dissipation, or anywhere you need a small efficient heatsink.Package Included5 x Aluminum Alloy Heatsink
5Pcs 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$125.01Amplifier BoardAdd to cartThis is 1002 HIFI ,If you need other parameters, please click ID to buy.502C HIFI ID:1582750502L MINI ID:16526301002L MINI ID:1652631SpecificationsFeatures– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.– TPA3116D2 is a type D amplifier IC launched by TI …
5Pcs STK4132 50W+50W DX-0408 2.0 Channel STK Thick Film Series Amplifier board 10HZ-20KHZ
$106.46Amplifier BoardAdd to cartFeatureModel:STK4132 (4102/4122/4132/4152/4172/4162/4182 Random delivery)Working voltage:double AC15-18VOutput power:50W + 50WOp Amp Type:4558Frequency response:10HZ-20KHZWeight:194g(1pcs)Size:13 x 10 x 6cmPackage includes5 x Amplifier board
21pcs 7colors ZY-25 Mini Solderless PCB Circuit Test Breadboard
$15.86Electronic Accessories & SuppliesAdd to cart21pcs 7colors ZY-25 Mini Solderless PCB Circuit Test BreadboardDescriptionUsage:experiment, testing and robot.Color:Yellow, white, cyan, red, blue, green, blackSpecificationSize dimension:20mm x 15mm x 12mmMode:ZY-25Number of hole:25Single sideInsulating material:ABS plasticThickness of insulating layer:generalReinforcing material:composite materialFeatureIt can be recycled and recycling.It is easy to use this breadboardYou can piece the breadboard together in fixed unitPackage included21 x Breadboard
10ml Continuous injection Self Refill Vaccinator Poultry Syringe
$48.59Lab ChemicalsAdd to cartDescription10ml Continuous Injection Syringe is mainly used for small animals to the prevention and treatment of disease.SpecificationMaterial:PlasticSize:As shownColor:YellowFeatures Easy to use gun suitable for all drench types both oral and pour on. Rotary adjustment switch function. Infinitely adjustable dose from 0.5ml to 10ml. Unbreakable barrel for long life.Package Included1 x 0.5-10ml Continuous Drench Gun1 x …
10ml Continuous injection Self Refill Vaccinator Poultry SyringeRead More
Robotdyn RFID Reader Writer NFC Module MFRC522 Board
$17.13Card ReaderAdd to cartFeatureThis RFID module base on MFRC522 IC and that can read and write Mifare’s tags. The microcontroller and card reader uses SPI for communication. The card reader and the tags communicate using a 13.56MHz electromagnetic field. The RFID MFRC522 module supports MF1xxS20, MF1xxS70 and MF1xxS50 tags. The RFID MFRC522 module supports contactless communication and uses …
Robotdyn RFID Reader Writer NFC Module MFRC522 BoardRead More
5Pcs DIY CD4060 Music LED Light Kit Electronic Training DC 3V-5V
$25.39DIY Electronic KitsAdd to cartIntroduction to the circuit principleIC2:CD4060 is a 14-stage two-way counter with oscillator, R1, R2, RP1, C1 and IC2 9,10,11 feet circuit composed of the oscillator, the oscillation frequency can be adjusted by the RP1.Transistor Q1, Q2, Q3 play a driving role, D1, D2, D3 play a role in the cycle of reset. IC2 Q5, Q6, …
5Pcs DIY CD4060 Music LED Light Kit Electronic Training DC 3V-5VRead More
Reviews
There are no reviews yet.