5pcs 3V/3.7V To 5V 1A Lithium Battery Step Up Module Board Mini Mobile Power Boost Charger Module with Undervoltage indication
$28.62
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Using high quality chips and expanding MOS tubes.
2. The output current is expanded to 1A, and the maximum output is 1.5A. The 2A Schottky diode is used to recharge the balance.
3. With the new scheme design, the circuit design does not require electrolytic capacitors and tantalum capacitors (the electrolytic capacitors have a short life and the tantalum capacitors are in danger of explosion). 3 ceramic capacitors (MCC) used in high-end circuits.
4. The same load indicator and undervoltage indication (when the battery voltage is less than 2.7V, the indicator will go out under load, when the battery voltage is greater than 2.7V with load, the indicator light is on, when there is no load, the indicator light is micro bright).
5. Ultra-small size, 14.1*18.8*5.5 mm.
6. The circuit conversion efficiency is high, the efficiency is higher than 90%, and the efficiency of the single-cell lithium battery is also less than 80%.
7. Input low power reverse connection protection. If your battery has 2A protection board, the protection board will protect when you input the positive and negative poles of the power supply. Note that when there is no protection board or the input current is greater than 2A, the input reverse connection protection Will fail, will cause the module to be damaged, remember.
8. Ultra-low quiescent current, new version, quiescent current will be less than 100 microamps. No connection is required to connect to the battery.
Specifications
Input voltage:1-5V
Output voltage:5.1-5.2V
Output current:rated 1A-1.5A (single-cell lithium battery input), maximum 1.5A (single-cell lithium battery input)
Conversion efficiency:up to 96% (the higher the input voltage, the higher the efficiency)
Switching frequency:500KHz
Output ripple:30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
Undervoltage indication:LED with load LED is on (input voltage is lower than 2.7V LED is off)
Operating temperature:industrial grade (-40 ° C to +85 ° C)
Full load temperature rise:30 ° C
Quiescent current:130uA
Load adjustment rate:±1%
Voltage regulation rate:±0.5%
Dynamic response speed:5% 200uS
Short circuit protection:None, if you want to have short circuit protection, you can input the lithium battery protection board or use a protected lithium battery.
Input reverse connection protection:none
Wiring method:welding
Input mode:IN+ input positive, IN- input negative
Applications
1).DIY a mobile power supply, you only need to input a battery power input, you can output 5V voltage to charge your mobile phone, MP3, MP4, PSP, very simple and convenient.
2). Power your electronic equipment. When your equipment needs 5V power supply, but now you only have lithium battery power supply, use this module to directly boost to 5V, solve your troubles.
3). The system is powered by the front stage. When you input the battery (1-5V) when you are working on a project, and your system board needs 5V stable power, then you choose this module will be your most. Good choice, you can work without commissioning directly on the machine, easily achieve high efficiency and high power boost.
Frequently Asked Questions and Answers
1. Why is my module designed to this shape
A:Our module is designed for your convenience. You can also remove the USB holder and solder the module directly to the PCB. The package is DIP-24.
2. How efficient is the module working I use it on the battery and it is very efficient. Can I use it
A:The efficiency of this module is very high in non-synchronous rectification. The highest efficiency of our test can reach 96%. There is also friends who do not blindly pursue high efficiency, high efficiency is proportional to the price, for example, you need 5V 0.5A power supply, 80% efficiency loss energy is 0.625W, 90% efficiency loss energy is 0.278W, Do you think it is necessary to double the cost of this 0.3W power It is ok to choose a combination.
3. Is this power module short-circuit protected When I use it, I accidentally output a short circuit and it will burn out
A:There is no short circuit protection. If you need short circuit protection, please connect the self-recovery fuse in series at the input.
4. Does this power module have input reverse connection protection When I use it, I accidentally input the power supply and it will burn out when I reverse it.
A:There is no reverse protection
5. Can this module current run at 5V 500mA for a long time
A:This module has a design power of 2.5W. It can run for a long time at 2.5W, and 5V*0.5A=2.5W can be operated for a long time. .
6. I need a current of about 2A. Can this module work in parallel
A:Direct parallel connection is not possible. There will be a large circulation between them. If you want to output parallel operation, you need to adjust the voltage of each module to a uniform error of less than 50 mV, so that it can work. Care should be taken to avoid overloading a single module and the output power should not exceed 70% of the total power of the module.
7. What is the working temperature of this module, can it reach the industrial level
A:Yes, the working temperature is -40 to 85 degrees.
Weight | 0.015 kg |
---|
Customers Also Viewed
20pcs 3×5 Battery Spacer Plastic Holder 18650 Lithium Battery Support Combination Fixed Bracket with Bayonet
$26.72Module ComponentsAdd to cartSpecificationMaterial:ABSColor:BlackWeight:13gDiameter:18mmFeatures– Made of ABS material, lightweight and durable– Fits 15 x 18650 batteries– Makes your battery pack Solid and Reliable! – Replacing the traditional adhesive with a professional battery holder, the combination is very convenient, the connection is more firm, and the battery maintenance is also convenient. It is the best choice for battery packs. …
10Pcs DC-DC 1V-5V To 5V 500mA Boost Converter Step Up Power Module
$20.90Boost & Buck ModuleAdd to cart10Pcs DC-DC 1V-5V To 5V 500mA Boost Converter Step Up Power ModuleFeatureInput voltage of DC 1V~5V, output 5V DC voltage is stable, the input to the output current of 500~600MA with two AA batteries, a single AA battery power supply output current 200 ma about for mobile phones camera, single-chip, digital products.High conversion efficiency up …
10Pcs DC-DC 1V-5V To 5V 500mA Boost Converter Step Up Power ModuleRead More
.40 Laser Bore Sighter Red Dot Sight Brass Cartridge Boresighter
$18.21Laser BoresighterAdd to cartCaution:Avoid direct eye exposure to the laser beam. Laser radiation is emitted from the aperture.SpecificationHousing Material:BrassLaser Type:Red LaserLaser Wavelength:635~655mmMax Output PowerPower Supply:2Pcs LR41 Batteries (NOT Included)Battery Installation:Positive side facing outwards. Look at your button cell battery, you will see inch+inch on the flat side commonly, which means positive. And the other slightly rounded side is …
.40 Laser Bore Sighter Red Dot Sight Brass Cartridge BoresighterRead More
12V 2 in 1 Auto Car Hot Cool Fan Heater Universal Windscreen Window Demister Defroster
$36.44Solar CollectorsAdd to cart12V 2 in 1 Auto Car Fan Heater Hot Cool Fan Windscreen Window Demister DefrosterSpecificationType:Car Fan Material:ABSColor:PinkVoltage:12VCurrent:12.5APower:150WQuantity:1 pcSize:As the picture shows-It is ideal for defrosting or de-misting windows and windscreens.-This heater or fan will blow instant heat or cool air. It will warm your car . -Or if you are feeling hot, like in the …
12V 2 in 1 Auto Car Hot Cool Fan Heater Universal Windscreen Window Demister DefrosterRead More
200Pcs 20cm Male To Female Jump Cable for
$16.56Electronic Accessories & SuppliesAdd to cart200Pcs 20cm Male To Female Jump Cable For Description High quality and in good working condition Durable and reusable Easy to install and use A popular choice for construction or repair Be used for electronic project and Genuine product Specification Length:20cm 1p-1p pin male to female header Compatible with 2.54mm spacing pin headers Package included …
10Pcs Length 150mm OD 10mm 1mm Thick Wall Borosilicate Glass Blowing Tube Lab Tubes
$18.21Lab TubesAdd to cartDescriptionHigh quality borosilicate glass, Premium 3.3 borosilicate tubing, preferred by scientific and artist glassblowers world-wide.HEAVY wall tubing 10 pieces, 7mm outside diameter with a 1mm wall – all approximately 150mm long. This glass tube bends easily with propane (LPG) and oxygen mix. High quality, heat and corrosion resistant.SpecificationName:10Pcs 150mm OD 10mm 1mm Thick Wall Borosilicate …
10Pcs Length 150mm OD 10mm 1mm Thick Wall Borosilicate Glass Blowing Tube Lab TubesRead More
Reviews
There are no reviews yet.