5pcs 3V/3.7V To 5V 1A Lithium Battery Step Up Module Board Mini Mobile Power Boost Charger Module with Undervoltage indication
$28.62
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Using high quality chips and expanding MOS tubes.
2. The output current is expanded to 1A, and the maximum output is 1.5A. The 2A Schottky diode is used to recharge the balance.
3. With the new scheme design, the circuit design does not require electrolytic capacitors and tantalum capacitors (the electrolytic capacitors have a short life and the tantalum capacitors are in danger of explosion). 3 ceramic capacitors (MCC) used in high-end circuits.
4. The same load indicator and undervoltage indication (when the battery voltage is less than 2.7V, the indicator will go out under load, when the battery voltage is greater than 2.7V with load, the indicator light is on, when there is no load, the indicator light is micro bright).
5. Ultra-small size, 14.1*18.8*5.5 mm.
6. The circuit conversion efficiency is high, the efficiency is higher than 90%, and the efficiency of the single-cell lithium battery is also less than 80%.
7. Input low power reverse connection protection. If your battery has 2A protection board, the protection board will protect when you input the positive and negative poles of the power supply. Note that when there is no protection board or the input current is greater than 2A, the input reverse connection protection Will fail, will cause the module to be damaged, remember.
8. Ultra-low quiescent current, new version, quiescent current will be less than 100 microamps. No connection is required to connect to the battery.
Specifications
Input voltage:1-5V
Output voltage:5.1-5.2V
Output current:rated 1A-1.5A (single-cell lithium battery input), maximum 1.5A (single-cell lithium battery input)
Conversion efficiency:up to 96% (the higher the input voltage, the higher the efficiency)
Switching frequency:500KHz
Output ripple:30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
Undervoltage indication:LED with load LED is on (input voltage is lower than 2.7V LED is off)
Operating temperature:industrial grade (-40 ° C to +85 ° C)
Full load temperature rise:30 ° C
Quiescent current:130uA
Load adjustment rate:±1%
Voltage regulation rate:±0.5%
Dynamic response speed:5% 200uS
Short circuit protection:None, if you want to have short circuit protection, you can input the lithium battery protection board or use a protected lithium battery.
Input reverse connection protection:none
Wiring method:welding
Input mode:IN+ input positive, IN- input negative
Applications
1).DIY a mobile power supply, you only need to input a battery power input, you can output 5V voltage to charge your mobile phone, MP3, MP4, PSP, very simple and convenient.
2). Power your electronic equipment. When your equipment needs 5V power supply, but now you only have lithium battery power supply, use this module to directly boost to 5V, solve your troubles.
3). The system is powered by the front stage. When you input the battery (1-5V) when you are working on a project, and your system board needs 5V stable power, then you choose this module will be your most. Good choice, you can work without commissioning directly on the machine, easily achieve high efficiency and high power boost.
Frequently Asked Questions and Answers
1. Why is my module designed to this shape
A:Our module is designed for your convenience. You can also remove the USB holder and solder the module directly to the PCB. The package is DIP-24.
2. How efficient is the module working I use it on the battery and it is very efficient. Can I use it
A:The efficiency of this module is very high in non-synchronous rectification. The highest efficiency of our test can reach 96%. There is also friends who do not blindly pursue high efficiency, high efficiency is proportional to the price, for example, you need 5V 0.5A power supply, 80% efficiency loss energy is 0.625W, 90% efficiency loss energy is 0.278W, Do you think it is necessary to double the cost of this 0.3W power It is ok to choose a combination.
3. Is this power module short-circuit protected When I use it, I accidentally output a short circuit and it will burn out
A:There is no short circuit protection. If you need short circuit protection, please connect the self-recovery fuse in series at the input.
4. Does this power module have input reverse connection protection When I use it, I accidentally input the power supply and it will burn out when I reverse it.
A:There is no reverse protection
5. Can this module current run at 5V 500mA for a long time
A:This module has a design power of 2.5W. It can run for a long time at 2.5W, and 5V*0.5A=2.5W can be operated for a long time. .
6. I need a current of about 2A. Can this module work in parallel
A:Direct parallel connection is not possible. There will be a large circulation between them. If you want to output parallel operation, you need to adjust the voltage of each module to a uniform error of less than 50 mV, so that it can work. Care should be taken to avoid overloading a single module and the output power should not exceed 70% of the total power of the module.
7. What is the working temperature of this module, can it reach the industrial level
A:Yes, the working temperature is -40 to 85 degrees.
Weight | 0.015 kg |
---|
Customers Also Viewed
20pcs Sound Module for Electronic Toy IC Chip Voice Recorder 120s 120secs Recording Playback Talking Music Audio Recordable Board Gift
$85.21Other Module BoardAdd to cartSpecificationsOperating Voltage:3-5VStandby CurrentRecording Time:120sRecording Input:adopt ADC 14 Bit,Audio Out DAC 14 BitRecording Voice Format:ADPCMRecording Distance:3-5mRecording/Voice Play Mode:independently play a piece of sound recording or play a piece of prerecordig voiceCycle Mode Play:can set cycle play times or constant cycle playPrerecording voice is burnt from external to SPI Flash,can prerecord chord music or voiceAdaptive Loudspeaker:8-32 ohm …
10pcs 130 Small Motor DIY Homemade Fan Toy Accessories
$10.33Module ComponentsAdd to cartFeatureThree-leaf soft paddle, the central ring yellow cap is ABS green plastic, the surrounding fan blade is super soft silicone material, even if it is touched by hand when transporting, it will not be injured, it is very suitable for young makers DIY use; Used with the motor will make your DIY work more convenient.MotorSize:25*20*15mm3-6V …
10pcs 130 Small Motor DIY Homemade Fan Toy AccessoriesRead More
10pcs CJMCU-9930 APDS-9930 Proximity and Non Contact Gesture Recognition Detection Attitude Sensor
$33.33Sensor & Detector ModuleAdd to cartFeatures• Optical modules integrated with ALS, infrared LEDs and proximity detectors• Ambient Light Sensing (ALS) – Approximate human visual response – Programmable interrupt capability with upper and lower thresholds – Up to 16-bit resolution – High sensitivity operation behind dark glass – 0.01lux low lumen performance• Proximity detection – Fully calibrated to 100 mm detection …
150pcs LED RGB Common Cathode 4-Pin F5 5MM Diode
$19.32Electronic Accessories & SuppliesAdd to cartFeaturesConvenient for DIY and repair equipment and electrical appliancesPerfect use for home, office and industry electrical equipment and electrical appliancesCurrent:20mAVoltage:3VSize:5mm Light Color:RED, BLUE, GREENPackage included150 x Cathode 4-PINS F5 5mm LED Light
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish Tank
$32.87Electronic Accessories & SuppliesAdd to cartSpecifications1. Volt:220v2. Power:100w3. Microcomputer control,Power off memory function4. Made of high-intensity anti-explosion and corrosion protection material5. Ideal for use in either saltwater or freshwater aquariums6. Electronic temperature control, high accuracy:±1→7. Easy to read and adjust the temperature8. Fixed to the glass by suction9. Adjustable temperature is 16-36 degreePackage included1 x Fish tank heater1 x English …
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish TankRead More
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator Module
$10.84Boost & Buck ModuleAdd to cartDescription– DC DC Boost Converter Module working frequency 1MHZ. – Up to 93% Efficiency (usually is 84%-91%) – Quiescent current:190uA.– Current Limit Program(0.5-2.5A,Default 1.8A) – Size:21 x 11 x 4mm– Weight:1.5g– ProtectionOver current protection(OCP)Over voltage protection(OVP)Short circuit protection(SCP)Over temperature protection(OTP) Output 5VInput voltage DC 2.6 ~ 4.5V,output DC 5V±3%Maximum output:5V/1300MA(See the table below for details) …
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator ModuleRead More
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling Heatsink
$15.34Electronic Accessories & SuppliesAdd to cartFeatures3pin ultra silent LED case fan.Each fan is With 15 LED lights.Connect to power supply or motherboard.Anti-vibration rubber pads on all four corners keep the fan super silent.It offers incredible cooling to increase the longevity and stability of the system and components.Cooling fan for desktop computer case and CPU cooler.SpecificationLED Light Color:Colorful MarqueeCompatible CPU:Computer Case …
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling HeatsinkRead More
Reviews
There are no reviews yet.