5pcs 3V/3.7V To 5V 1A Lithium Battery Step Up Module Board Mini Mobile Power Boost Charger Module with Undervoltage indication
$28.62
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Using high quality chips and expanding MOS tubes.
2. The output current is expanded to 1A, and the maximum output is 1.5A. The 2A Schottky diode is used to recharge the balance.
3. With the new scheme design, the circuit design does not require electrolytic capacitors and tantalum capacitors (the electrolytic capacitors have a short life and the tantalum capacitors are in danger of explosion). 3 ceramic capacitors (MCC) used in high-end circuits.
4. The same load indicator and undervoltage indication (when the battery voltage is less than 2.7V, the indicator will go out under load, when the battery voltage is greater than 2.7V with load, the indicator light is on, when there is no load, the indicator light is micro bright).
5. Ultra-small size, 14.1*18.8*5.5 mm.
6. The circuit conversion efficiency is high, the efficiency is higher than 90%, and the efficiency of the single-cell lithium battery is also less than 80%.
7. Input low power reverse connection protection. If your battery has 2A protection board, the protection board will protect when you input the positive and negative poles of the power supply. Note that when there is no protection board or the input current is greater than 2A, the input reverse connection protection Will fail, will cause the module to be damaged, remember.
8. Ultra-low quiescent current, new version, quiescent current will be less than 100 microamps. No connection is required to connect to the battery.
Specifications
Input voltage:1-5V
Output voltage:5.1-5.2V
Output current:rated 1A-1.5A (single-cell lithium battery input), maximum 1.5A (single-cell lithium battery input)
Conversion efficiency:up to 96% (the higher the input voltage, the higher the efficiency)
Switching frequency:500KHz
Output ripple:30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
Undervoltage indication:LED with load LED is on (input voltage is lower than 2.7V LED is off)
Operating temperature:industrial grade (-40 ° C to +85 ° C)
Full load temperature rise:30 ° C
Quiescent current:130uA
Load adjustment rate:±1%
Voltage regulation rate:±0.5%
Dynamic response speed:5% 200uS
Short circuit protection:None, if you want to have short circuit protection, you can input the lithium battery protection board or use a protected lithium battery.
Input reverse connection protection:none
Wiring method:welding
Input mode:IN+ input positive, IN- input negative
Applications
1).DIY a mobile power supply, you only need to input a battery power input, you can output 5V voltage to charge your mobile phone, MP3, MP4, PSP, very simple and convenient.
2). Power your electronic equipment. When your equipment needs 5V power supply, but now you only have lithium battery power supply, use this module to directly boost to 5V, solve your troubles.
3). The system is powered by the front stage. When you input the battery (1-5V) when you are working on a project, and your system board needs 5V stable power, then you choose this module will be your most. Good choice, you can work without commissioning directly on the machine, easily achieve high efficiency and high power boost.
Frequently Asked Questions and Answers
1. Why is my module designed to this shape
A:Our module is designed for your convenience. You can also remove the USB holder and solder the module directly to the PCB. The package is DIP-24.
2. How efficient is the module working I use it on the battery and it is very efficient. Can I use it
A:The efficiency of this module is very high in non-synchronous rectification. The highest efficiency of our test can reach 96%. There is also friends who do not blindly pursue high efficiency, high efficiency is proportional to the price, for example, you need 5V 0.5A power supply, 80% efficiency loss energy is 0.625W, 90% efficiency loss energy is 0.278W, Do you think it is necessary to double the cost of this 0.3W power It is ok to choose a combination.
3. Is this power module short-circuit protected When I use it, I accidentally output a short circuit and it will burn out
A:There is no short circuit protection. If you need short circuit protection, please connect the self-recovery fuse in series at the input.
4. Does this power module have input reverse connection protection When I use it, I accidentally input the power supply and it will burn out when I reverse it.
A:There is no reverse protection
5. Can this module current run at 5V 500mA for a long time
A:This module has a design power of 2.5W. It can run for a long time at 2.5W, and 5V*0.5A=2.5W can be operated for a long time. .
6. I need a current of about 2A. Can this module work in parallel
A:Direct parallel connection is not possible. There will be a large circulation between them. If you want to output parallel operation, you need to adjust the voltage of each module to a uniform error of less than 50 mV, so that it can work. Care should be taken to avoid overloading a single module and the output power should not exceed 70% of the total power of the module.
7. What is the working temperature of this module, can it reach the industrial level
A:Yes, the working temperature is -40 to 85 degrees.
Weight | 0.015 kg |
---|
Customers Also Viewed
5Pcs Aluminum Alloy Heatsink Cooling Pad for High Power LED IC Chip Cooler Radiator Heat Sink 69*69*37mm
$48.03Module ComponentsAdd to cartSpecificationMaterial:Aluminum 6063-T5Processing method:machine sawingNumber of gears:24Size:69*69*37mmlength:69mmUsed for IC ,Diode, Dynatron ,Electronic ,LED,RAM,CHIP computer’s component heat dissipation, or anywhere you need a small efficient heatsink.Package Included5 x Aluminum Alloy Heatsink
5Pcs 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$125.01Amplifier BoardAdd to cartThis is 1002 HIFI ,If you need other parameters, please click ID to buy.502C HIFI ID:1582750502L MINI ID:16526301002L MINI ID:1652631SpecificationsFeatures– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.– TPA3116D2 is a type D amplifier IC launched by TI …
5Pcs STK4132 50W+50W DX-0408 2.0 Channel STK Thick Film Series Amplifier board 10HZ-20KHZ
$106.46Amplifier BoardAdd to cartFeatureModel:STK4132 (4102/4122/4132/4152/4172/4162/4182 Random delivery)Working voltage:double AC15-18VOutput power:50W + 50WOp Amp Type:4558Frequency response:10HZ-20KHZWeight:194g(1pcs)Size:13 x 10 x 6cmPackage includes5 x Amplifier board
21pcs 7colors ZY-25 Mini Solderless PCB Circuit Test Breadboard
$15.86Electronic Accessories & SuppliesAdd to cart21pcs 7colors ZY-25 Mini Solderless PCB Circuit Test BreadboardDescriptionUsage:experiment, testing and robot.Color:Yellow, white, cyan, red, blue, green, blackSpecificationSize dimension:20mm x 15mm x 12mmMode:ZY-25Number of hole:25Single sideInsulating material:ABS plasticThickness of insulating layer:generalReinforcing material:composite materialFeatureIt can be recycled and recycling.It is easy to use this breadboardYou can piece the breadboard together in fixed unitPackage included21 x Breadboard
10ml Continuous injection Self Refill Vaccinator Poultry Syringe
$48.59Lab ChemicalsAdd to cartDescription10ml Continuous Injection Syringe is mainly used for small animals to the prevention and treatment of disease.SpecificationMaterial:PlasticSize:As shownColor:YellowFeatures Easy to use gun suitable for all drench types both oral and pour on. Rotary adjustment switch function. Infinitely adjustable dose from 0.5ml to 10ml. Unbreakable barrel for long life.Package Included1 x 0.5-10ml Continuous Drench Gun1 x …
10ml Continuous injection Self Refill Vaccinator Poultry SyringeRead More
Robotdyn RFID Reader Writer NFC Module MFRC522 Board
$17.13Card ReaderAdd to cartFeatureThis RFID module base on MFRC522 IC and that can read and write Mifare’s tags. The microcontroller and card reader uses SPI for communication. The card reader and the tags communicate using a 13.56MHz electromagnetic field. The RFID MFRC522 module supports MF1xxS20, MF1xxS70 and MF1xxS50 tags. The RFID MFRC522 module supports contactless communication and uses …
Robotdyn RFID Reader Writer NFC Module MFRC522 BoardRead More
5Pcs DIY CD4060 Music LED Light Kit Electronic Training DC 3V-5V
$25.39DIY Electronic KitsAdd to cartIntroduction to the circuit principleIC2:CD4060 is a 14-stage two-way counter with oscillator, R1, R2, RP1, C1 and IC2 9,10,11 feet circuit composed of the oscillator, the oscillation frequency can be adjusted by the RP1.Transistor Q1, Q2, Q3 play a driving role, D1, D2, D3 play a role in the cycle of reset. IC2 Q5, Q6, …
5Pcs DIY CD4060 Music LED Light Kit Electronic Training DC 3V-5VRead More
Reviews
There are no reviews yet.