3000W induction Heating Machine Built-in Power Meter Water Shortage Protection Overload Protection Parameter Setting
$266.68
Type Type1 / Type Type2 / Type Type3 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Using 1.6mm thickness military-grade PCB design, copper thickness 2OZ, large current and good heat dissipation;
2. 120mm cooling fan;
3. Use custom oversized high-power heat sink to ensure the heat dissipation of the MOS tube;
4. The output terminal uses three M4 copper poles in parallel, in addition to the heating coil, it can be connected to a high-voltage package or a high-frequency transformer, etc.;
5. Using six original IRFP260 and one original MKPH capacitor in parallel resonance, high power and high efficiency;
6. This product can work continuously for a long time when the heat dissipation conditions reach the standard.
7. The integrated design of power meter and control system is adopted, which is convenient to use;
8. Integrated control to avoid complicated wiring;
9. The heating ring is wrapped with heat-resistant thermal insulation material to prevent short circuits during heating;
10. Add a digital current overload protection switch, once it is overloaded, it will automatically cut off the heating protection circuit in time;
11. The color LCD screen displays the various operating parameters of the system, including voltage, current, power, temperature and capacitance of the motherboard, and can easily switch between Chinese and English with one key. The maximum allowable power can be set by the power meter, and the maximum work can be exceeded during work. The power immediately enters the overload protection mode.
12. Button control, and external foot control, convenient for different scenes.
13. The water cooling system is protected against water shortage.
Parameters
1. Dimensions:237 x 150 x 96 (mm).
2. Operating voltage:12-48V
3. Maximum operating voltage:48V
4. Maximum power:3000W
5. Maximum current:60A
6. Inner diameter of the heating ring:60mm
Package included
Type1:host+DC12V2A power supply+heating ring+water pump+graphite crucible
OR
Type2:host+DC12V2A power supply+heating ring+water pump+graphite crucible+DC48V 50A power supply
OR
Type3:host+DC12V2A power supply+heating ring+water pump
Precautions for use
1. In any case, no airborne power is allowed (empty load refers to the output port does not connect to any load), once the empty load will cause the board to make high frequency noise, which will lead to the MOS pipe completely damaged, can not be repaired;
2. When using switch power supply, you should note, because high-power switching power supply generally has a slow start function, that is, when the initial output voltage slowly rise, and if the voltage rises to 11V before the induction heating circuit will be due to the voltage is not enough to cause the circuit not to vist, so that two MOS pipes at the same time on and burn the components, so it is important to switch the power supply voltage after stability and then access the induction heating circuit, can be connected between the power supply and the motherboard an air switch;
3. This circuit is very strict on the power supply, 12V power supply must use more than 500W power supply, 24V greater than 1200W, 36V greater than 2000W, 48V greater than 30 00W(recommended operating voltage 48V);
4. Whether used at any voltage as long as the operating current is less than 60A will not burn out of the circuit, the maximum current setting of the power meter can be set to 60A, high power running heat is inevitable, so be sure to do a good job of cooling.
5. The operating voltage must never be lower than 12V.
6. Heating machine when working heating ring will produce a high heat, it is recommended to use water-cooled cooling ring cooling, so as not to cause damage to the motherboard, conditional use of cold water into, hot water diameter discharge into the sewer way.
7. The power input is marked with aplus-sign and must not be reversed!
8. Do not load power on empty (here empty means that the output is not connected to any load and the heating ring does not heat the object is not empty).
How to use
1. According to the wiring diagram way to connect the wires, carefully check, not staggered.
2. Plug in the 12V2A power supply to the AC110V-220V to see if the pump and fan are working properly.
3. If the pump fan is working properly, plug in the DC48V power supply to AC220V and wait about a few seconds to see if the voltage display of the power meter on the motherboard is about 48V.
4. If the voltage display is correct, press the ‘M’ reset power meter on the power meter, then press ‘on/ON’ to turn on heating, the green light comes on and when you see the current in the power meter, the heating is turned on.
5. Want to turn off heating press ‘reset/RSET’ off heating, green light off, power meter current zero.
6. This heating plate with overload protection and system water shortage protection, if the pump is not working properly or the water shortage system in the pump will automatically protect the cut-off heating, the red light lights up
7. The maximum current and minimum input voltage maximum input voltage and maximum power alarm can be set, the detailed setting can be found in the attachment, power meter setting method.
8, if the use of red light on heating stop, first check whether there is water flow in the pump, if the water is normal, see if the maximum current alarm is exceeded, the default maximum alarm current is 60A,the power is3 200W.
9 If a current voltage or power alarm is generated to stop heating and then the heating needs to be switched on again after the alarm is lifted, the power meter must be reset by pressing the ‘M’ button of the power meter before heating can be turned on.
A wiring diagram
The pump connection method:
Weight | 1 kg |
---|
Customers Also Viewed
3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor Module
$24.62Sensor & Detector ModuleAdd to cart3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor ModuleDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on …
3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor ModuleRead More
GDCPH 16V83F Super Farah Capacitor Automotive Electronic Rectifier 2.7v500F Screw Hole Large Capacity Capacitor
$90.34Electronic Accessories & SuppliesAdd to cartDescriptionThis product can be used in electronic devices such as:RAM, smart three-meter, motor drive, clock circuit, toys, CMOS power failure protection, digital camera, hand-cranked rechargeable flashlight, PDA and other fields as a backup power supply.SpecificationBrand:GDCPHModel:16V83FCapacity:83FRated voltage:16 VSize:231*35*65mmPitch:7mmPackage included1 x capacitor
5pcs PWM DC Motor Governor 5V-16V 10A Speed Switch LED Dimmer Speed Controller
$22.64Motor PWM Speed ControllerAdd to cartParameterMaximum voltage:16VMinimum voltage:5VContinuous current:10AShort circuit maximum current:20A (less than 10 seconds)Speed control mode:PWM stepless speed regulation, can also be used to adjust the lightControl mode:speed control potentiometer (clockwise open, continue to rotate clockwise from 1% to 99%)Duty cycle:0%-99% (0% position is the leftmost state of the potentiometer).When the current is on, 0.002A (there is no …
5pcs PWM DC Motor Governor 5V-16V 10A Speed Switch LED Dimmer Speed ControllerRead More
3pcs 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver Power Supply AC90-265V Constant Current Thyristor Dimming Module
$17.33Driver ModuleAdd to cartSpecificationsInput voltage:AC90-265VOutput voltage:DC21-48VOutput current:300mA(adjustable)Product size:68*34*22mmWorking temperature:Ta:50 TC:75Efficiency:≥80%Power factor:0.6Product application:spotlight PAR light / bulb light / candle light / etc.Package Included3 x 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver
5Set Mini Emergency Hand-cranked Dynamotor Charger Portable Hand-cranked Generator 3V 5V for Diy Electronic Production with Clip Lines
$37.08Electronic Accessories & SuppliesAdd to cartDescriptionUnderstand the gear’s speed-increasing transmission conversion and the principle of electric energy generation, and cultivate the manual and brain skills, which is very suitable for manual classes in schools or for adults and children to play together!When shaking slowly for one second or more, the generating voltage can easily reach 3V, and it is easy …
APPJ Single End 6J1 + FU32 Tube Amplifier Board Class A Power AMP Hifi Vintage Audio Assembled Board
$182.24Amplifier BoardAdd to cartNew update:The appearance is updated from March 6, 2021.SpecificationsAssembled, solder freeDriver tubes:6J1x2PCSPower tubes:FU32x2PCSPower output:3W+3W @8ohmFrequency response:30-40KHz(+-1dB)Input sensitivity:550mVSignal-to noise-ratio:-80dB/3WInput power:85-264VACPower consumption:40WInput impedance:10K ohmOutput impedance:16ohm,8ohm,6ohm,4ohmPackage dimension:12*21*17cmPackage weigth:1.5KGNoteThe self-made shell must be opened with sufficient heat dissipation holes, preferably 50% of the shell area, at least 30%, otherwise it will affect the service life.Package Included1 x End 6J1 …
Caturda C2707 4Channel I2C interface Current Voltage Power Monitoring Module for Raspberry Pi
$39.03Raspberry Pi & Orange PiAdd to cartSpecificationsCurrent and power monitor for Raspberry Pi, 4 channels, can monitor the current, voltage, power and voltage across the sampling resistor through the I2C/SMBus interfaceFeaturesRaspberry Pi 40pin GPIO Interface, fit for Raspberry Pi all SeriesSupport 4 Channel I2C/SMBus CommunicationOnboard 1ohm 1% Resistance.Monitor 3.2A Bidirectional current12bit ADC Measuring 0-26V VoltageWorking Voltage:3.3V/5VInterface:I2C/SMBusResistance:1ohm 1%Voltage Range:0-26VCurrent:÷3.2ASize:65mmx30mmPackage Included1* Monitoring Module
Reviews
There are no reviews yet.