3000W induction Heating Machine Built-in Power Meter Water Shortage Protection Overload Protection Parameter Setting
$266.68
Type Type1 / Type Type2 / Type Type3 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Using 1.6mm thickness military-grade PCB design, copper thickness 2OZ, large current and good heat dissipation;
2. 120mm cooling fan;
3. Use custom oversized high-power heat sink to ensure the heat dissipation of the MOS tube;
4. The output terminal uses three M4 copper poles in parallel, in addition to the heating coil, it can be connected to a high-voltage package or a high-frequency transformer, etc.;
5. Using six original IRFP260 and one original MKPH capacitor in parallel resonance, high power and high efficiency;
6. This product can work continuously for a long time when the heat dissipation conditions reach the standard.
7. The integrated design of power meter and control system is adopted, which is convenient to use;
8. Integrated control to avoid complicated wiring;
9. The heating ring is wrapped with heat-resistant thermal insulation material to prevent short circuits during heating;
10. Add a digital current overload protection switch, once it is overloaded, it will automatically cut off the heating protection circuit in time;
11. The color LCD screen displays the various operating parameters of the system, including voltage, current, power, temperature and capacitance of the motherboard, and can easily switch between Chinese and English with one key. The maximum allowable power can be set by the power meter, and the maximum work can be exceeded during work. The power immediately enters the overload protection mode.
12. Button control, and external foot control, convenient for different scenes.
13. The water cooling system is protected against water shortage.
Parameters
1. Dimensions:237 x 150 x 96 (mm).
2. Operating voltage:12-48V
3. Maximum operating voltage:48V
4. Maximum power:3000W
5. Maximum current:60A
6. Inner diameter of the heating ring:60mm
Package included
Type1:host+DC12V2A power supply+heating ring+water pump+graphite crucible
OR
Type2:host+DC12V2A power supply+heating ring+water pump+graphite crucible+DC48V 50A power supply
OR
Type3:host+DC12V2A power supply+heating ring+water pump
Precautions for use
1. In any case, no airborne power is allowed (empty load refers to the output port does not connect to any load), once the empty load will cause the board to make high frequency noise, which will lead to the MOS pipe completely damaged, can not be repaired;
2. When using switch power supply, you should note, because high-power switching power supply generally has a slow start function, that is, when the initial output voltage slowly rise, and if the voltage rises to 11V before the induction heating circuit will be due to the voltage is not enough to cause the circuit not to vist, so that two MOS pipes at the same time on and burn the components, so it is important to switch the power supply voltage after stability and then access the induction heating circuit, can be connected between the power supply and the motherboard an air switch;
3. This circuit is very strict on the power supply, 12V power supply must use more than 500W power supply, 24V greater than 1200W, 36V greater than 2000W, 48V greater than 30 00W(recommended operating voltage 48V);
4. Whether used at any voltage as long as the operating current is less than 60A will not burn out of the circuit, the maximum current setting of the power meter can be set to 60A, high power running heat is inevitable, so be sure to do a good job of cooling.
5. The operating voltage must never be lower than 12V.
6. Heating machine when working heating ring will produce a high heat, it is recommended to use water-cooled cooling ring cooling, so as not to cause damage to the motherboard, conditional use of cold water into, hot water diameter discharge into the sewer way.
7. The power input is marked with aplus-sign and must not be reversed!
8. Do not load power on empty (here empty means that the output is not connected to any load and the heating ring does not heat the object is not empty).
How to use
1. According to the wiring diagram way to connect the wires, carefully check, not staggered.
2. Plug in the 12V2A power supply to the AC110V-220V to see if the pump and fan are working properly.
3. If the pump fan is working properly, plug in the DC48V power supply to AC220V and wait about a few seconds to see if the voltage display of the power meter on the motherboard is about 48V.
4. If the voltage display is correct, press the ‘M’ reset power meter on the power meter, then press ‘on/ON’ to turn on heating, the green light comes on and when you see the current in the power meter, the heating is turned on.
5. Want to turn off heating press ‘reset/RSET’ off heating, green light off, power meter current zero.
6. This heating plate with overload protection and system water shortage protection, if the pump is not working properly or the water shortage system in the pump will automatically protect the cut-off heating, the red light lights up
7. The maximum current and minimum input voltage maximum input voltage and maximum power alarm can be set, the detailed setting can be found in the attachment, power meter setting method.
8, if the use of red light on heating stop, first check whether there is water flow in the pump, if the water is normal, see if the maximum current alarm is exceeded, the default maximum alarm current is 60A,the power is3 200W.
9 If a current voltage or power alarm is generated to stop heating and then the heating needs to be switched on again after the alarm is lifted, the power meter must be reset by pressing the ‘M’ button of the power meter before heating can be turned on.
A wiring diagram
The pump connection method:
Weight | 1 kg |
---|
Customers Also Viewed
WEAH-307 3 Way Audio Speaker Crossover 100W Filter Treble Mediant Bass Frequency Divider Module
$15.30Amplifier BoardAdd to cartFeatureMode:WEAH-307Power:100WImpedance:4-8ohmCompatible for:Under 6inches HornTreble Standard:12db/octBass Standard:12db/octSize:8.5×6.2×2.6cmFrequency response:low 45Hz, high 20KHzPackage includes1 x 100W Filter Treble Mediant Bass Frequency Divider
3pcs WXD3-13-2W Precision Potentiometer 22K 22K Ohm Wirewound Multi-Turn Potentiometer
$10.49Module ComponentsAdd to cartSpecificationsResistance range:22K┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included3 x Potentiometer
20Pcs Serial Port WIFI ESP8266 Module Adapter Plate with IO Lead Out for ESP-07 ESP-08 ESP-12
$12.02Smart ModuleAdd to cart20Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.NoteNeed to solder 3V regulator by youself.ESP-07, ESP-08, ESP-12 module board are not included!!!Package included20 x Serial Port WIFI ESP8266 Module Adapter Plate40 x Pins
10pcs 2S 5A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board BMS for Li-ion Lipo Battery
$16.88Battery Protection ModuleAdd to cartSpecificationsModel:HX-2S-A2 Overcharge voltage range:4.25-4.35v ± 0.05vSize:17.5 * 17.5 * 3.2mm over discharge voltage range:2.5-3.0v ± 0.05vUpper limit operating current:5A Operating temperature:-40 — +50 °Upper limit instantaneous current:7A Storage conditions:-40– +80 °Quiescent current:less than 10uA Effective life:more than 50,000 hoursInternal resistance:less than 300mΩ Short circuit protection:can be protected, need to charge recoveryCharging voltage:8.4V-9VWelding point DescriptionB + …
DC 24V 600L/H Submersible Pump Immersible Pump Under Water Pump Bath Pump
$42.51Electrical Pump & ValveAdd to cartSubmersible Pump Immersible Pump Under Water Aquarium Bath Pump DC 24V 600L/HSpecificationColor:GreyUse:SubmersibleMaterial:Engineering ABSRated Voltage:DC 24VStarting Voltage:6VCurrent:0.75AFlow:600L/HNoise:50dB MAXMax. Head:500cmPower:18wWaterproof grade:IP68Motor:brush motorWater temperature:-20 ° C ~ 60 ° ° CAmbient humidity:45%~90%No load current:less than 0.2ACurrent at load:1.2ACable:1.5m /59.06inch(appr.)Total Length:105.9mm /4.31inch(appr.)FeaturesBrand New and high quality.Suitable for tap water, sea water, ground waterCannot be used directly with 220V AC …
DC 24V 600L/H Submersible Pump Immersible Pump Under Water Pump Bath PumpRead More
TDA7498 2.1 Digital Power Amplifier Board 200W+100W+100W Supasses TPA3116 Class D DC24V
$70.06Amplifier BoardAdd to cartFeatures-Using original TDA7498 TL072-The front input capacitor and the inter-stage coupling capacitor use Siemens’ top-level capacitors 1UF, the electrolytic capacitor signal main circuit uses Taiwanese famous brands, and the main filter capacitor uses special electrolytic capacitors 2≠2200UF to ensure strong continuous power support.-The resistors are high-precision chip resistors, and the main circuit uses five-ring metal …
TDA7498 2.1 Digital Power Amplifier Board 200W+100W+100W Supasses TPA3116 Class D DC24VRead More
3Pcs RobotDyn RTC DS1307 Real Time Clock Battery Shield with Pin Headers Set
$18.67Expansion Board & ShieldAdd to cartPINOUT:http://img.staticbg.com/file/products/20171226001032PINOUT-RTCDS1307.pdfSchematic:http://img.staticbg.com/file/products/20171226001140Schematic-RTCDS1307.pdfFeatureType:Logic ICsPackage includes3 x RTC DS1307 (real time clock) + battery3 x Wemos D1 mini shield6 x Male Pin Header 8pins6 x Female Pin Header -BLACK 8pins6 x Stackable Header – BLACK 8pins
Reviews
There are no reviews yet.