Aassembled AC 12V 1A 6J1 Preamp Tube Preamp Amplifier Board PreAmplifier Module
$28.42
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Type:6j1 tube
2. Power input:AC 12V 1A, 5.5*2.5 plug
3. Channle:2.0 / stereo
4. Potentiometer Role:Volume adjustment + Power Switch
5. Size:77 x 75 x 52mm
6. For your convenience, this product has been assembled
Specification
FE-6J1-2 fever tube pre-amp board is the circuit schematic design imitation crew Music fax X-10D,to be rational optimization,more stable performance than the original machine,tube play 10% increase. This board uses a single 12V AC input,the circuit processing provides 6J1 tube needed positive and negative voltage and filament power supply voltage.
Power works:an open power tube filament heating is started,when the boost from the zero-voltage start boosting hot filament tube,etc.,also happens to boost boosting finish,so this is the same with the guts rectification,8*470UF the capacitor filter very clean,good power supply system will not have a hum,the filament is 12V DC power supply,need two filament tube is connected in series with a DC filament also in order to reduce the noise.
Instructions
6J1 Tube Buffer 0.85 times magnification, connected between the source and before or after class, can effectively filter digital flavor.
1. AC 12V input:The DC3.5 / 5.5 * 2.1 socket, 12V AC power adapter, if you use non-plug AC 12V transformer, power cord need to solder on the circuit board. Remember:You can not use a DC power input, otherwise it does not work!
2. the left-channel input / right channel input:audio signal input, can be connected to mobile phones, computers, M3, the MP4, and other music players.
3. the left channel output / right channel output:an audio signal output terminal can be connected to the audio signal input amplifier, power amplifier board.
4. the power switch / volume knob:turn the knob counter-clockwise to decrease the volume beginning, when the volume down to the minimum, if it continues to rotate until the inchtickinginch sound, then the power off, the light goes off; in the closed state, Turn the knob clockwise to hear inchtickinch sound, light is on, the power is turned on, then the volume is minimal, then continue clockwise rotation is to increase the volume.
Package included
1 x Assembled 6J1 value preamp amplifier board
Weight | 0.083 kg |
---|
Customers Also Viewed
12pcs DC3-6V Dual Axis L-Type TT Motor DC Geared Motor for Car
$43.70Smart Robot & Solar PanelAdd to cartSpecificationsRatio of 1:120Working voltage:3V ~ 6VNo-load current voltage:6V ≤250mA , 3V ≤160mA No-load speed:250 ± 10% rpm @ 6V , 110 ± 10% rpm @ 3VWith dual axisPackage Included12 x TT motor
13Pcs 100R-1M Each 1 3362 Potentiometer Package 3362P Adjustable Resistor
$6.55Electronic Accessories & SuppliesAdd to cartDescription3362 potentiometer package Adjustable resistance package 100R-1M Each of 13 total.100R (101)200R (201)500R (501)1k (102)2k (202)5K (502)10K (103)20K (203)50K (503)100K (104)200K (204)500K (504)1M (105)Package included13 x 100R-1M 3362 Potentiometer
GT-24 Digital Wireless Module 2.4G NRF24L01 PA LNA industrial Grade 1100M Long Distance with Welding
$10.92Smart ModuleAdd to cartSpecificationModel:GT-24Module size:30.3 * 14.5mm (including PCB antenna)Operating frequency band:2.4GHz ~ 2.525GHz (adjustable, 1MHz step)Interface mode:1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal board and DuPont line)Supply voltage:DC 2.0-3.6V (Note:above 3.6V, the module will be permanently damaged)Communication level:0.7VCC ~3.3V (VCC refers to the module supply voltage)Measured distance:1000m (clear open space, maximum power, height 2m, …
Full SMD Welding Practice Board Kit SMD Lucky Turntable Flow Lamp DIY Soldering Skill Training Parts
$46.53DIY Electronic KitsAdd to cartFeaturePower supply voltage:5V DCBoard size:80*60mm Board thickness:1.6mmBoard material:Standard plate, all pads are tinned, fireproof and anti-powder materials, can be disassembled repeatedly.Net weight:24gNoteThis product is a spare part, and the buyer needs to weld and assemble it by himself. (instruction not includes)Package includes1 x DIY KIT
HBV-1822 8 Million Pixel Camera Module 8MP Auto Focus Lens USB Camera Board with UY2/MJPEG Output format
$71.06Other Module BoardAdd to cartSpecificationsModel No.:HBVCAM-1822Model Size:38mm ≠ 38mm ≠ 6.75mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:AutoObject distance:30CM-infinitResolution:800LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:1000 mWOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:IMX179 (1/3.2” )Seneor Package:CSP,Bare DieMaximum resolution:3264*2448Sensitivity:700mv /(lux-sec)Pixel Size:1.4┢m x 1.4┢m Maximum Image Transfer Rate:MJPEG 640×480 …
TPA3255 2.0 Digital Amplifier Board DC50V Strong High Power 300W + 300W Class D Digital Amplifier Board
$109.31Amplifier BoardAdd to cartProduct DescriptionModel:TPA3255Work:Class DQuiescent current:60mAWork efficienc:more than 90%DC 35-50V (can not exceed 50V)The current need more than 7.5AFrequency response:20Hz to 20KHzDynamic range:more than 100 dBSignal to noise ratio:(SNR) more than 111dBOutput Power315W / 4 ohm, distortion 10%185W / 8 ohm, distortion 10%260W / 4 ohm, distortion 1%150W / 8 ohm, distortion 1%Operating voltage:DC 50VColour:picture colorMaterial:ABSSize:149 x …
0.36 inch 4-digit LED Display Module TM1637 Driver Tube
$6.55LED BoardAdd to cartFeatureThe 4-digit LED Display Module integrates a 0.36′ 4-Digit 7-Segment Display Common Anode with 12 pins. It uses the driver chip TM1637.The module has 4 control pins of 2.54mm pitch, which can direct connect to microcontroller with jumper wires.So it’s very easy to control the matrix without tons of wiring. Available to make microcontroller control …
0.36 inch 4-digit LED Display Module TM1637 Driver TubeRead More
Reviews
There are no reviews yet.